Content |
FUTURELIGHT PHS-150 PRO-HEAD SPOT
Medium-Moving-Head
* 8 brilliant, dichroic colours plus white * Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position) * Rainbow-effect with adjustable speed in both directions * Gobo-wheel with 6 rotating gobos plus open * All gobos can be interchanged * With gobo-shake function * Exact positioning via 16 bit Pan/Tilt movement resolution * Manual focus * Strobe-effect with 1-10 flashes per second * Mechanic dimmer * Positioning within 540° Pan and 265° Tilt * Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off * DMX-controlled operation or stand alone operation with Master/Slave-function * 48 preprogrammed scenes in Program Run for stand alone operation * Number of scenes in Program Run can be changed individually * The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory * 8 built-in programs can be called up via DMX-controller * Sound-controlled via built-in microphone * For bright 150 W discharge lamp * DMX-control via every standard DMX-controller
SPECIFICATIONS: Power supply: 230 V AC, 50 Hz ~ Power consumption: 285 W DMX-control-channels: 10 DMX-512-connection: 3-pin XLR Flash-rate: 10 Hz Colour-wheel: 8 dichroic filters and open Rotating gobo-wheel: 6 gobos and open Outside diameter of the gobos: 27 mm Image diameter of the gobos: 23 mm Length of base: 330 mm Width of yoke: 320 mm Height (head horizontal): 485 mm Weight (net): 13 kg | LED Moving Head with 7 x 10W RGBW 4-in-1 LED's HeadBanger 10 - Output: 6.100 Lux @ 1m - Lens: 25¡ - DMX-512 protocol w/ 7 or 12-channel control modes: dimmer, strobe (0-10Hz), pan (540¡ max), tilt (270¡ max), pan fine, tilt fine, red, green, blue, white, colour macros, sound active - User selectable modes: DMX, auto, master/slave, sound (via integral microphone w/ adjustable sensitivity) - Control panel: 4-digit LED display + 4 push-buttons, for easy programming - DMX input & output: 3-pin XLR connectors - Metal housing w/ hanging bracket (truss- or other clamp not included) - Low noise Delta Electronics cooling fan - Power consumption: 80W (max) - For indoor use only - Dim.(LxWxH): 27*26*23cm /10.63*10.24*9.05 in - Net weight: 2.75kg/ 6 lbs |
- 60w cob rgb led
- High torque fast motor giving smooth, lightning quick, reactions
- 5 control modes: dmx (8 or 11 channel), automatic programs, sound-controlled programs, master/slave
- Manual setup - lcd screen for easy setup & programming
- Beam angle: 25 degrees
| The Explorer 250 Pro is the most extended version of the HSD-250 Explorer series. It provides high performance combined in a compact and reliable fixture. The Explorer 250 Pro is the solution for all mobile and fixed installations where quality and lightoutput have top priority.
Key features:
LCD Display for all settings and controls
Frost filter
New Software:
Gobo shake function
Lamp timer
Unit timer
Display blackout mode
Power supply: 240V 50 Hz
Lamp: HSD-250/78,
HSD-250/80, MSD-250/2
Colours: One colour wheel with 7 vivid
colours and white
DMX: control board with LED display;
DMX512 console
(Remote switch on/ off
lamp via DMX512 console)
Linearity move speed adjust
Power: 500W
Dimensions (LxWxH): 400 x 400 x 476 mm
Weight: 26 kg
And much more... |
Power supplies available: 230V 50/60Hz
240V 50/60Hz
100V 50/60Hz
120V 50/60Hz
Halogen Decostar 51 IRC lamp.
Disc with 6 colours + white.
Gradual electronic dimmer.
Input: DMX 512.
Automatic operation in "Stand Alone" mode.
Cooling by convection.
Body in die-cast plastic and aluminium.
Functioning in any working position.
In conformity with the European Union Low Voltage Directive 73/23 and Electromagnetic Compatibility Directive 89/336.
Consumption: 60 VA.
2 control channels from lighting desk.
“Master-Slave" operation: a projector can pilot up to 100 projectors and can set (with or without dimmer) both the colour sequence and colour timing from 3 to 360 seconds.
Colours available: white and silver.
|
User\'s manual DMX Control Table Eco label Photometric measurements Daslight V3 fixtures Fixture Library grandMA2
Cameo AURO BAR 100 LED Moving Bar
- LED Moving Bar with infinite pan and tilt
- Two high-speed 3-phase motors
- 16-bit resolution and 3,600 Hz refresh rate
- 7 powerful 15 watt quad LEDs
- Rich RGBW colors, subtle pastel shades, 3 natural whites
- 4 DMX modes, RDM capability and ArtNET compatible
- Ethernet switch with FDT bridging (failsafe data transfer)
- Automatic positioning and color temperature correction
- Single pixel control
- 20 Hz strobe and 4 dimming curves
- 3- and 5-pin DMX, Neutrik powerCON and RJ45 connectors
- Battery powered 6-button display for offline setting
Designed for exciting, highly creative lighting, the Cameo AURO® BAR 100 produces subtle to rich, saturated RGBW color mixes and three temperatures of white with a line of seven 15 watt quad LEDs. The all-professional moving light\'s features include two high speed 3-phase motors for infinite pan and tilt, 16-bit resolution for ultra smooth motion and dimming, and with a 3,600 Hz refresh rate it is ideal for TV and video applications.
In addition, the AURO® BAR 100 sports colour temperature and automatic positioning correction, a strobe function and single pixel control for amazing chase effects. It is RDM enabled and provides four modes of DMX control. The fixture is Art-Net compatible with automatic FDT bridging to maintain daisy chain operation in case of single device failure. A battery powered 6-button display enables easy offline configuration.
Built for reliable heavy-duty use, the AURO® BAR 100 comes in a rugged compound enclosure with both 3-pin and 5-pin DMX, RJ45 and Neutrik powerCON mains inputs and outputs. The versatile fixture operates on all voltages from 100 - 240 V AC.
Product type
LED Moving Lights
Type
LED Moving Heads
Colour spectrum
RGBW
Number of LEDs
7
LED type
15 W
Refresh rate
3600 Hz
Dispersion
4 °
DMX input
RJ45 Ethernet In (ArtNET) , XLR 3-pin male , XLR 5-pin male
DMX output
RJ45 Ethernet Out (ArtNET) , XLR 3-pin female , XLR 5-pin female
DMX mode
19-channel , 29-channel , 39-channel , 9-channel
DMX Functions
auto programs , colour macro , Colour temperature correction , Dimmer , Dimmer Curve , Pan/Tilt , Pan/Tilt fine , Patterns , RGBW , strobe
PAN movement
unlimited
TILT movement
unlimited
High Speed Strobe
0 - 20 Hz
Standalone modes
Auto run
Controls
- , + , Battery Display , Enter , mode , Value Down , Value Up
Indicators
colour LC display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
140 W
Power connector
Neutrik PowerCon
Housing material
ABS plastic , metal
Cabinet colour
Black
Cooling
Convection
Illuminance
42000lx @ 1m
Luminous flux
2300 lm
Width
570 mm
Height
260 mm
Depth
195 mm
Weight
9,5 kg
|
Reviews
There are no reviews yet.