Content |
FUTURELIGHT PHW-700 PRO-Head WASH
Multi-function Washlight
* DMX-controlled operation or stand alone operation with Master/Slave-function
* 48 preprogrammed scenes in Program Run for stand alone operation
* Number of scenes in Program Run can be changed individually
* The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
* 8 built-in programs can be called up via DMX-controller
* Sound-controlled via built-in microphone
* CMY colour mixture for indefinite colour variations
* Motorised colour-wheel with additional 4 discrete dichroic filters plus open, 3200 K and 5600 K correction-filters, UV-filter
* Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position)
* Rainbow-effect with adjustable speed in both directions
* Macro-function for combinations between CMY-colour mixture and colour-wheel
* Frost-filter for softer beam
* Beam-shape effect: wide and flat beam can steplessly be rotated by 180°
* Strobe-effect of 1-10 flash per sec.
* Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off, operating hours
* Remotely switching of the lamp
* Built-in demo sequence
* Preprogrammed variable/random strobe and dimmer pulse effects
* Black-out while Head moving or CMY/colour/beam-shaping changing
* Remotely controllable speed of PAN /TILT movement for easy programming
* Remote reset function
* Motorized zoom
* Mechanic dimmer
* Exact positioning via 16 bit Pan/Tilt movement resolution
* For MSR 700 G-22 lamp
* DMX-control via every standard DMX-controller
* Suitable FUTURELIGHT controllers: CP-528 controller
Power supply: 230 V AC, 50 Hz ~
Power consumption: 900 W
DMX-control-channels: 17
DMX-512-connection: 3-pin XLR
Flash-rate: 10 Hz
Colour-system: CMY colour-mixture
Colour-wheel: 4 dichroic filters and white
Maximum PAN-movement 630°: in 3.5 s
Maximum TILT-movement 265°: in 2.5 s
Length of base (including handles): 530 mm
Width of yoke: 390 mm
Height (head horizontal): 570 mm
Weight (net): 37 kg
|
Voltage: 100-240V 50-60HZ,Power consumption: 70W Light source: 4χ10W RGBW /per side, Control Mode: Auto, Sound-active, DMX, M/Slave, Channel: 15/21CH, Angle: Horizontal 540°, Vertical: Infinite rotating, Beam Angle: 2x25 deg. |
User\'s manual DMX Control Table Eco label Photometric measurements Daslight V3 fixtures Fixture Library grandMA2
Cameo AURO BAR 100 LED Moving Bar
- LED Moving Bar with infinite pan and tilt
- Two high-speed 3-phase motors
- 16-bit resolution and 3,600 Hz refresh rate
- 7 powerful 15 watt quad LEDs
- Rich RGBW colors, subtle pastel shades, 3 natural whites
- 4 DMX modes, RDM capability and ArtNET compatible
- Ethernet switch with FDT bridging (failsafe data transfer)
- Automatic positioning and color temperature correction
- Single pixel control
- 20 Hz strobe and 4 dimming curves
- 3- and 5-pin DMX, Neutrik powerCON and RJ45 connectors
- Battery powered 6-button display for offline setting
Designed for exciting, highly creative lighting, the Cameo AURO® BAR 100 produces subtle to rich, saturated RGBW color mixes and three temperatures of white with a line of seven 15 watt quad LEDs. The all-professional moving light\'s features include two high speed 3-phase motors for infinite pan and tilt, 16-bit resolution for ultra smooth motion and dimming, and with a 3,600 Hz refresh rate it is ideal for TV and video applications.
In addition, the AURO® BAR 100 sports colour temperature and automatic positioning correction, a strobe function and single pixel control for amazing chase effects. It is RDM enabled and provides four modes of DMX control. The fixture is Art-Net compatible with automatic FDT bridging to maintain daisy chain operation in case of single device failure. A battery powered 6-button display enables easy offline configuration.
Built for reliable heavy-duty use, the AURO® BAR 100 comes in a rugged compound enclosure with both 3-pin and 5-pin DMX, RJ45 and Neutrik powerCON mains inputs and outputs. The versatile fixture operates on all voltages from 100 - 240 V AC.
Product type
LED Moving Lights
Type
LED Moving Heads
Colour spectrum
RGBW
Number of LEDs
7
LED type
15 W
Refresh rate
3600 Hz
Dispersion
4 °
DMX input
RJ45 Ethernet In (ArtNET) , XLR 3-pin male , XLR 5-pin male
DMX output
RJ45 Ethernet Out (ArtNET) , XLR 3-pin female , XLR 5-pin female
DMX mode
19-channel , 29-channel , 39-channel , 9-channel
DMX Functions
auto programs , colour macro , Colour temperature correction , Dimmer , Dimmer Curve , Pan/Tilt , Pan/Tilt fine , Patterns , RGBW , strobe
PAN movement
unlimited
TILT movement
unlimited
High Speed Strobe
0 - 20 Hz
Standalone modes
Auto run
Controls
- , + , Battery Display , Enter , mode , Value Down , Value Up
Indicators
colour LC display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
140 W
Power connector
Neutrik PowerCon
Housing material
ABS plastic , metal
Cabinet colour
Black
Cooling
Convection
Illuminance
42000lx @ 1m
Luminous flux
2300 lm
Width
570 mm
Height
260 mm
Depth
195 mm
Weight
9,5 kg
|
BEAM: 36pcs. x3W RGB LEDs (8RED + 10GREEN + 10BLUE + 8WHITE)
RGBW COLOUR MIXING
Beam Angle: 13.5o
Strobe: 1-20fps
Dimmer: DMX controlled Dimmer 0-100%
Movement: 540o PAN - 240o TILT
LED Display for MENU settings
Input signal: DMX 512/13 Channels
Voltage: 220-240V AC
Colour: Black
Dimensions: 267x167x304mm
Weight: 6kg |
Info
Features: > Equipped with 18 x 3 W tricolor LED with RGB colors > Through the close chip placement of the multichip technology, an exquisite color mix even with short distances to the illuminated surface is provided > Compact lightweight > Positioning within 540° PAN and 270° TILT > Stepless RGB color changing > 6 color macros can be called up via DMX controller > Dimmer > Strobe effect with adjustable speed > Random strobe effect > Exact positioning via 16 bit PAN/TILT movement resolution > DMX-controlled operation or stand-alone operation with Master/Slave function > Sound-controlled via built-in microphone > Control board with 4-digit LED display and foil-keyboard for adjusting the DMX-starting address, PAN/TILT Reverse, Reset > DMX control via every standard DMX controller
|
The Cameo AURO® SPOT 300 is an RDM-capable ultra bright moving head with 16-bit resolution, 630° pan and 235° tilt movement and high speed 3-phase motors. It is powered by a single 180 watt LED and sports 8 intense colors plus white and split colors. A rotating 3-facet prism, 8 fixed and 6 replaceable rotating gobos provide a wide variety of awesome animated effects.
The AURO® SPOT 300 features 5-channel, 15-channel, 24-channel DMX control modes, automated programs and sound activation as well as master, slave and standalone capabilities. Functions include a choice of 4 smooth dimming curves, gobo shake and a high-speed 0 - 20 Hz cycle strobe.
The heavy-duty housing integrates a temperature controlled low noise fan, 3-pin and 5-pin DMX plus Neutrik powerCON inputs and outputs. A battery-powered 6-button display enables convenient offline configuration. The all-professional multi-voltage AURO® SPOT 300 operates on 100 - 240 V AC.
- RDM enabled moving head
- Luminous flux 4900 lm
- High speed 3-phase motors
- 16-bit resolution
- Motor focus
- Automated positioning correction
- Battery powered display for offline configuration
- 8 intense colors, white and split colors
- 2 gobo wheels + open
- 6 rotating and 8 fixed gobos
- Rotating gobos replaceable with metal or glas gobos
- Rotating 3-facet prism
- Smooth dimming from 100 - 0% with 4 selectable curves
- 0 - 20 Hz strobe
Product type
LED Moving Lights
Colour spectrum
8-channel multi colour , Split colours , white
Colour temperature
9300 K
DMX input
XLR 3-pin male , XLR 5-pin male
DMX output
XLR 3-pin female , XLR 5-pin female
DMX mode
15-channel , 24-channel , 5-channel
DMX Functions
auto programs , Dimmer , Dimmer Curve , Gobo Shake , Gobo Wheel , PAN , TILT
High Speed Strobe
1 - 20 Hz
Standalone modes
Auto run , Show , sound control
Controls
Enter , mode , Value Down , Value Up
Indicators
colour LC display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
Neutrik PowerCon
Housing material
metal , plastic
Cooling
temperature-controlled fan
Illuminance
10250lx @ 5m , 28500lx @ 3m
|
Reviews
There are no reviews yet.