Content |
Genelec 7270A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7270A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio.
The main channels crossover frequency can be adjusted between 50-100 Hz. The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7270A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 112 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 12“ | | 250 W | | H x W x D 625 x 555 x 490 mm | | 51 Kg (112 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
| To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components - 10-inch glass-composite low-frequency transducer
- Front-firing, bass-reflex acoustic port
Controls and filters - Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert and ground-lift switch
Power and safety - 250 watt, Class AB amplification
- Internal damping and heat sink
- Integrated, gravity-calibrated rubber feet for stable placement
Inputs and outputs - Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
- Left and right balanced XLR and ¼" TRS outputs
- XLR subwoofer output for connecting a second T10
Inputs |
| 2- Balanced XLR |
| 2- Balanced ¼" TRS |
| 2- Unbalanced RCA | | | Outputs |
| 2- Balanced XLR (full range with 80 Hz HPF option) |
| 2- Balanced ¼" TRS (full range with 80 Hz HPF option) |
| 1- Balanced XLR (Sub Out) | Performance | Frequency Response | 20 Hz - 200 Hz | Low Pass Filter Frequency | 50 - 130 Hz (variable) | Signal-to-Noise Ratio | >98 dB | THD | 0.019% @ power | |
10" Subwoofer
Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.
So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.
All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.
Tech Talk
Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.
The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.
The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.
All in all, the ThunderStorm subwoofers will make any system sound better and more complete.
As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.
Passive Radiator
The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.
Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.
The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.
Product | TS110 | Description | Subwoofer | Dimensions (WxHxD) [mm] | 330 x 485 x 430 | Dimensions (WxHxD) [“] | 12.99 x 19.09 x 16.93 | Free-field frequency range (-3dB) | 28Hz - 300Hz | Woofer | 250mm/10“ | Maximum SPL @ 1m | 108dB | Number of amplifiers | 1 | Total short-term output power | 250W | Protection limiter | Yes | Settings |
| System volume (Satellite & Sub) | -inf. - +6dB | Subwoofer volume | -inf. - +6dB | Level-lock dip switch | Yes | Filter-lock dip switch | Yes | Input level dip switch | +7dBu/+22dBu | Phase inversion | 0°/180° | Switchable Satellite filter | flat/80Hz | Variable Subwoofer filter | 60Hz-140Hz + LFE | Remote control | Sys. & Sub. Vol. | Connectors |
| XLR in left (impedance) | (10k) | XLR in right (impedance) | (10k) | XLR in LFE (impedance) | (10k) | XLR out satellite left (impedance) | (10k) | XLR out satellite right (impedance) | (10k) | XLR out (LFE) (impedance) | (10k) | Power consumption |
| Standby | | Full output | 250VA | Misc. |
| Weight kg/lb. | 19.6 / 43.2 |
|
Product details
Woofer: 10-inch Paper Cone
Frequency response: 20Hz – 40Hz ~ 120Hz
Crossover frequency: 40-120Hz adjustable
Lf - Amplifier Power: 300W
Signal LF: >90dB
THD + N @ Rated Power LF: 0.08%
Inputs: 2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs: 2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity: +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse: 0° /180° switch
Available colors: Red, Black
Gross Weight: 22.4kg / 49.2lb
Net weight: 18.7kg / 41.1lb
Gross Dimensions: L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions: L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in
|
The WS-12 is a 1000W powered subwoofer for the studio and the stage. With frequency extension down to 23 Hz and 123 dB max SPL, it provides authoritative low end in any setting.
Power. Depth. Adaptability.
The WS-12 Subwoofer is the most powerful studio subwoofer available under $1000. It is made to be used with any near- or mid-field studio monitors, as well as with small portable PA systems in a live setting.
One of the key design specifications for the WS-12 is that it be capable of providing bass management in a 5.1 system where all of the full-range speakers are Kali IN-8s. As such, the WS-12 is powered by a 1000W power amplifier mated to a high-excursion 12-Inch driver.
This much power also makes the WS-12 a capable live subwoofer. Its enclosure is 18mm plywood and it has handles for easy carrying. Kali’s team made sure that it will fit in small passenger cars, so you can take it with you even when you’re calling a ride to get to your gig!
All this power is controlled by a robust, user-friendly DSP section that let you dial in the exact settings you need for your system. Whether you’re using it with a pair of LP-6s, as bass management in a 5.1 system, or on stage with a PA, it’s easy to configure the WS-12 to get exactly what you need.
The WS-12 was designed as a companion subwoofer for Kali’s LP- and IN-Series Studio monitors.
When used with a pair of Kali monitors, the subwoofer’s crossover and gain settings can be configured to precisely match those of the full-range monitors. With these settings dialed in, set the subwoofer between the speakers, and turn all speakers’ volume knob either to noon or all the way up. The subwoofer’s level will be exactly where it needs to in order to match the full- range speakers.
The WS-12 can be used for bass management in systems as large as 5.1 with any Kali monitors.
Convenient settings allow the use of an external crossover, and the WS-12 can even be configured as a dedicated Low Frequency Effects channel.
Powered: |
Yes |
Amp Class: |
D |
Continuous Power: |
500W |
Peak Power: |
1000W |
Driver Size: |
12 Inches |
Freq Response: (-10 dB): |
23Hz - 160 Hz |
Freq Response: (+/-3 dB): |
30Hz - 160 Hz |
Crossover: |
Selectable; See User\'s Manual |
Max SPL: |
123dB |
Unbalanced Inputs: |
Stereo RCA |
Balanced Inputs: |
Stereo TRS/XLR Combi Jack |
Balanced Outputs: |
Stereo XLR |
Other Inputs/Outputs: |
1/4-Inch Footswitch Input |
Enclosure: |
18mm Plywood |
Height: |
19 Inches (48.3cm) |
Depth: |
17 Inches (43.2cm) |
Width: |
16 Inches (40.7cm) |
Weight: |
63 Lbs (29kg) |
|
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.
The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.
8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement Technical SpecificationsInputs | 2x Balanced 1/4" TRS
2x Unbalanced RCA | Outputs | 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option) | Frequency Response | 30 Hz - 200 Hz | Low Pass Filter | 50 - 130 Hz (variable) | Signal to Noise Ratio | >98 dB (A weighted) | THD | 0.05% | Amplifier Power | 200 W peak, 100 W RMS | Power Consumption | 120 W | Amplifier Type | Class AB | Max Peak SPL | 104 dB at 1 m | Woofer | 8" glass-composite, downward-firing | Port | Rear-firing bass reflex (round) | Input Gain Adjustment | -30 to +6 dB | Polarity Reverse | 0 or 180° | Low Pass Filter | 50 Hz to 130 Hz | High Pass Filter | On/off | Protection | RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
| Power | 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz | Cabinet | Vinyl-laminated MDF | Dimensions | 10.2 x 12.6 x 11.0" (260 x 320 280 mm) | Weight |
21.2 lb (9.6 kg)
|
|
Reviews
There are no reviews yet.