GENELEC 8020AS COMPACT 2WAY ACTIVE NEARFIELD MONITOR

GENELEC ACTIVE LOUDSPEAKERS

Since its founding in 1978, the Finnish company Genelec has been known for its range of active monitor loudspeakers, featuring matched electronic-crossovers and individual amplifiers for each driver. Found in broadcast, recording and mastering studios worldwide, Genelec offer a range of monitors for all applications. The most popular types are detailed here, all other models are available to special order. Full brochures available on request.

A bi-amplified, two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This, the smallest speaker in the Genelec range features features magnetic shielding, aluminium cabinet, active crossover and 2 x 20W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8020A units in total, with the lead control affecting level of the whole chain. Front-panel mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets or the supplied keyhole wall-mount adapter and a three eighths of an inch thread on the base for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8020Aʼs.

A two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This features magnetic shielding, aluminium cabinet, active crossover and 2 x 40W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8030A units in total, with the lead control affecting level of the whole chain. Front-panel mains switch, mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets and a three eighths of an inch thread for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8030Aʼs.

A bi-amplified two-way system for main and surround monitoring in small control rooms, OB vehicles and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, 2 x 90W amplifiers with overload protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 30.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8040Aʼs.

A bi-amplified two-way system for main and surround monitoring in medium-sized control rooms and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, two amplifiers with overload and thermal protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 60.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one 8050A.

Although the same floor stand applies to all 8000 series models of Genelec speakers, each model uses a unique stand plate to allow connection to the stand. Please ensure the correct stand plate is ordered for your model of 8020A, 8030A, 8040A or 8050A speaker.

PRICE PER UNIT

The original A5

The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).

The new A5X

The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.

Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.

A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.

Stereolink

A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "The A5X: a superb impression.“

"A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)

Full Description

Compact and Ideal For Home Studio

Input Connections

Features

• Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
• Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
• Dedicated Volume, Bass and Treble controls for more flexibility
• Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
• Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
• 1/8'' TRS headphone connector with auto-mute loudspeaker function
• Magnetically shielded for placement near computer monitors
• Designed and engineered in Germany

Specifications

• Woofer: 4''
• Tweeter: 1.5''
• Output Power: 2 x 8 Watts
• Frequency Response: 80Hz - 20kHz
• Speaker Impedance: 4?
• Input 1:
  • Connector: 1/8'' TRS Stereo
  • Input Level: -10dBm, 10k?
• Input 2:
  • Connector: RCA Stereo
  • Input Level: -10dBm, 10k?
• Mic Input:
  • Connector: 1/4'' TRS
  • Input Level: -50dBm, 50?
• Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
• Weight: 4kg

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)