Content |
Griven AD-3436 Dolomite CYM 600 575W
STELVIO CYM 300, another newcomer to the architectural range, uses a new lamp, the MSD 250, which due to its short arc produces even more light output than from the HQI-TS used in the Vesuvio OS CYM 250. This projector is equipped with an optical system that produces a long throw beam of 33?°. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system. Remote lamp ON/OFF control and dimmer/strobe/black out functions now available. A version of the Stelvio - STELVIO CYM 300 HFT- is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven???s wireless DMX transmitter. See dedicated section for more information.
LAMP 250W, 18.000 lm, 6.700?° K Discharge lamp MSD 250 Average rated life 3.000 hours GY 9,5 base. Ordering code LP0205 Available on request: MSA 300 lamp (250W), 4000/6000 hours, 16.000 lm, 6000?° K
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 33?°. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
CONTROL Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
COOLING An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230V, 50Hz, 1,7 Amp
|
User\'s manual Eco label Photometric measurements Daslight V3 fixtures Fixture Library grandMA2
Cameo FLAT PRO FLOOD 600 IP65 Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs
- Highly flexible IP65 outdoor flood light
- Ultra flexible colour mixing with rich solid, warm pastel and UV colours
- Flicker free
- 6 modes of DMX control plus master, slave and standalone applications
- 4-button display for intuitive operation
- Security lock against unauthorized menu access
- Durable compact size metal enclosure
- Screw connectors for DMX and mains input and output
- Incl. universal bracket
The Cameo FLAT PRO series FLOOD 600 IP65 is a compact RDM enabled outdoor flood light equipped with nine 12 watt 6-in-1 LEDs generating rich RGBWA colours, soft pastel hues and intense UV effects. The IP65 rated fixture sports convection cooling, a 40° beam angle and 3,000 Hz refresh rate for flicker free performance.
The hardwearing metal enclosure features 3-pin screw connectors for DMX and mains input and output plus a backlit 4-button display for easy, intuitive operation while a security lock prevents unauthorized menu access. The Cameo FLOOD 600 IP65 provides 6 modes of DMX control with dimmer and strobe functions, colour temperature correction and master, slave and standalone applications.
The multi-voltage fixture operates on 100 – 240 V AC and comes with an adjustable universal bracket for floor placement and multiple mounting options. Barn doors are available as accessory.
Product type
LED PAR Lighting
Type
Outdoor
Colour spectrum
RGBWA+UV
Number of LEDs
9 x 6
LED type
12W (approx. 50000 operating hours)
Refresh rate
3000 Hz
Dispersion
40 °
DMX input
3-pin special connector, screwable
DMX output
3-pin special connector, screwable
DMX mode
11-channel , 2-channel , 3-channel 1 , 3-channel 2 , 6-channel , 9-channel
DMX Functions
colour fade , colour jump , colour macro , master dimmer , RGBWA+UV , strobe
Standalone modes
auto programs , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls
Enter , mode , Value Down , Value Up
Indicators
backlit LCD
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
90 W
Power connector
3-pin special connector, screwable
Housing material
metal
Cabinet colour
Black
Protection class IP
65
Cooling
Convection
Illuminance
7500 lx @ 1 m
Dimensions without mounting bracket
Width
180 mm
Height
180 mm
Length
120 mm
Weight
3,2 kg
|
Griven GR 456 Kolorado MK3 2500W
Architectural Colour Changer
KOLORADO MK3 2500 utilizes an HMI 2500/GS lamp (Sfa 21 ?12 base) and shares a similar wide angle output and the CYM colour mixing system of its small brother KOLORADO MK3 1800. However it offers, with its newly conceived patented optical system an extremely powerful light output, giving the ability to cover greater areas or distances, and indeed effective use in a higher level of ambient light, than the 1800W version. Like this version, Kolorado MK2 2500 has a uniform colour coverage, creating superb effects. The detachable ballast unit is separable from the main unit by up to 20m, and this and the relatively resultant relatively compact size of the main unit can greatly facilitate both portable use and fixed installations. Control is the same as the 1800W, with selectable inbuilt speed controllable pre-programmed colour blend sequences, or full control from standard DMX512, in which mode the lamp on/off can be remotely operated. A stand by function reduces power consumption automatically by 33% after black-out have been activated for more than 15 seconds. The aluminium and galvanized steel body, with certificated IP44 weather protection, is coated with black epoxy powder paint for exterior use. A new version of this unit using the 2000-hour MSA 2500W lamp is now available. Existing KOLORADO MK3 2500W
LAMP SOURCE Type: HMI, MSA (L/L) Wattage (W): 2500 Base: SFA 21-12, SPECIAL Lamp life (h): 500, 2000 (L/L) Lumens: 240.000, 260.000 (L/L) - COLOURS Color (MIX): - PROJECTION Angle: 74~{!c~} (standard) 34~{!c~}- 93~{!c~} (optional) Dimmer: Mechanical Strobe: 2,6 Fps - OPERATION DMX channels: 5 Stand alone: Master / Slave: On Board Control: - HOUSING Weather protection: IP44 Cooling: FV - SIZE (mm) Height: 821 Width: 620 Depth: 623 - - WEIGHT (kg) Main fixture: 77,5 - POWER Input (V): 230-240 HZ: 50-60 AMP: 9 |
LED headlight with strong white lighting.
It can be mounted on a flat surface, on the floor or wall-mounted.
Exterior lighting for commercial and industrial buildings, parks, sports fields, garage facilities, parking, and advertising structures. Low operating temperature, lack of consumables, much lower energy consumption, durability and weather resistance, environmentally friendly products. External, watertight.Photos may vary little.
The high degree of IP66 tightness makes these LED headlights suitable for outdoor use.Advantage is the long service life of up to 50,000 hours, compared to a conventional lamp that has an operating duration of about 2,000 hours.
Ideal for entrances, garages, terraces, cottages, shop windows, warehouses, etc.
Features:
- Power: 100W
- Voltage: AC85 – 265V
- Lumens: 9000Lm
- Lighting color: White
- Color temperature: 6500K
- Lighting Angle: 120º
- Lifespan: ≥50000 hours
- Waterproofing level: IP66
- Dimensions: 23 x 4 x 26cm
- Color: Black
|
User\'s manual DMX Control Table Eco label Photometric measurements Daslight V3 fixtures Fixture Library grandMA2
Cameo FLAT PRO FLOOD IP65 TRI Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing
- 1 x 60W Tri Color COB LED
- IP65 rated for outdoor applications
- Flicker free
- 120 degrees dispersion for perfect wall-washing effects
- DMX control plus master, slave and standalone modes
- Easy to operate via mode, enter, up and down keys with backlit display
- Menu lock to prevent unauthorized access
- Compact heavy-duty metal enclosure
- Universal mounting bracket
- DMX and mains input and output on screw connectors
- Barn doors available as accessory
The Cameo FLAT PRO series FLOOD IP65 TRI is a compact outdoor LED flood light with IP65 rating, 120° beam angle and convection cooling. A 60 watt tri-color COB LED generates rich, saturated RGB colors with a 3,000 Hz refresh rate providing flicker free performance. The black heavy-duty metal enclosure features screw connectors for DMX and mains input and output plus a backlit display with mode, enter, up and down keys for easy operation. The Cameo FLOOD IP65 TRI allows for 2-channel, 3-channel 1, 3-channel 2 and 6-channel DMX control as well as master, slave and standalone modes while a setting lock prevents unauthorized menu access. The universal bracket adds a wide variety of mounting options. Barn doors are available as accessory.
Product type
LED PAR Lighting
Type
Outdoor
Colour spectrum
RGB
Number of LEDs
1
LED type
60 W COB TRI LED
Refresh rate
3000 Hz
Dispersion
120 °
DMX input
3-pin special connector, screwable
DMX output
3-pin special connector, screwable
DMX mode
2-channel , 3-channel 1 , 3-channel 2 , 6-channel
DMX Functions
colour fade , colour jump , colour macro , master dimmer , RGB , strobe
Standalone modes
Auto run , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls
Enter , mode , Value Down , Value Up
Indicators
backlit LCD
Operating voltage
110 V AC - 240 V AC / 50 – 60 Hz
Power consumption
75 W
Power connector
3-pin special connector, screwable
Housing material
metal
Cabinet colour
Black
Protection class IP
65
Cooling
Convection
Illuminance
830lx @ 1m
Dimensions without mounting bracket
Width
180 mm
Height
180 mm
Length
120 mm
Weight
3,2 kg
|
GR0467 GOBOSTORM 575W
GOBOSTORM is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector. Using a 575W metal halide lamp with a high precision optical group, GOBOSTORM can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM has on-board dip-switch panel for digital data assignment and stand alone operation control. These functions can alternatively be operated from an external digital controller for a maximum of 1 channel of DMX. The zoom and focus are manually set and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, in any outdoor urban environment.
LAMP SOURCE
| Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 - suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 - optional) |
OPTICAL GROUP
| The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment
|
IMAGE
| One rotating gobo slot hosts either metal or glass gobos (D size - Ext 53,3 - Int 40 mm)
One dichroic filter can also be used in combination with a metal gobo |
DIGITAL CONTROL
| On-board dip-switch panel for digital data assignment and stand alone operation control
1 channel of standard DMX 512
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download IP65 box (ordering code AD4119) |
ELECTRICAL SPECIFICATIONS
| Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards |
HOUSING
| Pressure die cast aluminium body, with an adjustable mounting yoke
Scratch resistant polyester grey finish, which protects against UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus an internal axial fan keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J |
WEIGHT
| Unit = 22.1 Kg
Ballast = 10 Kg |
PACKING SIZE
| Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box |
|
Reviews
There are no reviews yet.