Content | Professional monitoring made easy
Looking for a stage monitor engineered to satisfy professional demands for performance
and sound without requiring additional power amps, crossovers and cables? Want a
versatile enclosure suitable for use as a side-fill, front-fill or a FOH system for (almost)
unplugged gigs? Then welcome to D.A.R.T. D.A.R.T packs a high-quality preamp, controller,
active crossover, two power amps, a 12" speaker and a 1" CD horn in a compact, low-profile
monitor housing. With HK AUDIO OFR? technology on board, these enclosures project
extraordinarily rich, transparent sound, even at very high levels.
And their remarkably linear frequency response enables high volumes with reduced feedback
sensitivity. Though D.A.R.T has been optimised for use as a stage monitor, its multi-functional
housing shape and the integrated DuoTilt? pole-mount cup allow it to be used for additional
applications. With all this and a full-featured input stage (to including a microphone input for
the mayor?s address), D.A.R.T is a high-end sound-reinforcement ?Swiss Army knife? for
literally every occasion.
Facts & Features:
The right solution for every musician who wants hassle-free professional monitoring
Two-way active circuitry featuring OFR? technology
250 watts RMS digital power amp for the 12" speaker
Power amp with 60 watts RMS for the 1" HFdriver
Multi-band limiting for key frequency ranges
Two-band EQ included
Balanced, separately adjustable microphone and line inputs and additional RCA input
HK AUDIO DuoTilt? for directing sonic energy towards the audience when used on a stand
TECHNICAL DATA:
Frequency response 80 Hz - 19 kHz +/- 3 dB
Axial sensitivity 1W/1m* 105 dB
Maximum SPL @ 1m* 123 dB @ 10% THD
Bass power amp 1x 250 W RMS
Mid/high power amp 1x 60 W RMS
Active protection circuitry Multi-band -limiter
Low/mid driver 1x 12" HK Audio Custom
HF horn/driver 1"
Directivity 60° x 40° CD horn
Crossover frequency 2 kHz; 24 dB per octave, passive
HF protection (passive) Dynamic protection circuitry
Speaker stand mounting collar DuoTilt?, 36 mm
Connectors 1x XLR Mic In
Weight 19.8 kg / 43.6 lbs.
Dimensions (WxHxD): 56.1 cm x 40.5 cm x 34 cm
Dimensions (WxHxD): 22" x 15 7/8" x 13 3/8" |
The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.
APPLICATIONS
- • Main vocal stage monitor
- • Drum or keyboard monitor
- • Main PA in small venues
General Specs
- 800 Watt Peak, 400 Watt RMS digital bi-amplification
- 127 dB max spl
- 60° x 60° constant directivity horn
- 10" High power neodymium woofer, 2.5" voice coil
- 7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:60Hz ÷ 20000 Hz
- Max SPL:127dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:7 kapton dome, 1" exit, neodymium
- Woofer:10" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:800W PEAK
- High frequencies:200 W PEAK
- Low frequencies:600 W PEAK
- Total power:400W RMS
- High frequencies:100 W RMS
- Low frequencies:300 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:450/17.7mm/inch
- Depth:417/16.4mm/inch
- Net Weight:14,5/31.96kg/lbs
|
The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Main PA in small venues
General Specs
- 1400 Watt Peak, 700 Watt RMS digital bi-amplification
- 129 dB max spl
- 60° x 60° constant directivity horn
- 12" High power neodymium woofer, 2.5" voice coil
- 1.7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:50Hz ÷ 20000 Hz
- Max SPL:129dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:1.7 kapton dome, 1" exit, neodymium
- Woofer:12" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:1400W PEAK
- High frequencies:400 W PEAK
- Low frequencies:1000 W PEAK
- Total power:700W RMS
- High frequencies:200 W RMS
- Low frequencies:500 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:550/21.6mm/inch
- Depth:417/16.4mm/inch
- Net Weight:16,5/36.3kg/lbs
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability. Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
1200 Watt Peak, 600 Watt RMS 131 dB max SPL 45 Hz - 20 kHz frequency response 15" Woofer, 2.5" voice coil 1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz Max SPL: 131 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression Driver: 1“, 1.4" voice coil Woofer: 15“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal Input connectors: Jack-XLR male Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz Protections: RMS limiter, HF Limiter: Fast limiter
Amplifier Specifications
Total power: 1200 W PEAK High frequencies: 400 W PEAK Low frequencies: 800 W PEAK Total power: 600 W RMS High frequencies: 200 W RMS Low frequencies: 400 W RMS
Cabinet Specs
Cabinet Material: Baltic birch Handles: 1 side Pole Mount/Cap: Yes Colour: Black
Size/Weight
Height: 362/14.25 mm/inch Width: 673/26.49 mm/inch Depth: 473/18.62 mm/inch Net Weight: 20.7/45.63 kg/lbs |
Active 300-Watt 2-Way Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter High-power 300-Watt 2-way monitor speaker system for live and playback applications Exceptional sound quality, wide frequency bandwidth and dynamic range Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight Adjustable feedback filter and integrated limiter for ultimate system control and speaker protection Integrated sound processor for ultimate system control and speaker protection Ultra-low noise Mic/Line input with Volume control and Clip LED Dedicated 3-band EQ for perfect sound shaping Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power High-resolution 1'' HF driver for exceptional high-frequency reproduction Proprietary horn design for ultra-wide sound dispersion Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption Integrated 35 mm pole socket for stand mounting and use as PA system High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany User's Manual
|
The DVX DM15 is a low-profi le stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that require powerful low-end performance without added subwoofers. It sports a high-performance 15" neodymium woofer and a 1.4" neodymium compression driver, coupled to an aluminum" CD horn. This combinationʼs response across the human voiceʼs full range is impressively assertive.
Paired with high-output digipro digital power amps in a bi-amped confi guration,
theDVX DM15belies its unobtrusive look with performance that is far from understated, delivering plenty of power to cover midsized to large stages.
|
Reviews
There are no reviews yet.