| Content |
HK Audio IL-8.75 Installation Line
| Horn-loaded, two-way ceiling mount cabinet. This full-range, high directivity enclosure???s voice reinforcement is remarkably natural-sounding. Ideal for public address in lecture halls and conference venues, and at fairs, airports, etc. Built-in passive crossover.
| | | Accessories | | 100 V Transformer with 3 power taps: 50 W, 25 W, 12.5 W Wall-mount bracket Ringbolt M8 Frame for mounting in ceilings made of 2' x 2' tiles
| | | | Details | | The IL 8.75 is a full horn-loaded 2-way full range loudspeaker enclosure with a built-in passive crossover. It is fitted with an 8“-cone loudspeaker in a bass reflex housing and a 3/4“-high frequency driver. Both drivers are coupled to a CD-horn. This equipment makes a frequency response in the bass range possible which is sufficient for speech transmission and the reproduction of background music even without a subwoofer. Apart from natural speech reproduction, the IL 8.75 stands out thanks to its high tonal quality. The directive effect even in the bass/mid-range achieves a high degree of speech clarity even in rooms with a longer echo effect. The IL 8.75 is ideally suited for close-range acoustic applications where distances of approx. 10 m have to be bridged. A controller is not necessary for operating the IL 8.75. It is possible, however, to use the Digital Field Controller (DFC).
| | | | Power handling capacity | | | RMS: | | 100 W | | Program: | | 200 W | | Peak (10 ms): | | 400 W | | | | | Dimensions
(wide x tall x deep) | | 17-3/4" x 17-3/4" x 8-5/8“
45 cm x 45 cm x 21,8 cm
| | | | Weight | | 35.2 lbs
16 kg | | | | Service articles | | 8“-speaker E994120 3/4“-driver E994121 |
|
Key Features:
- Compact enclosure
- Dual 205 mm (8 in) LF transducers
- 120° x 60° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm (1 in) exit
compression driver
- Dual Neutrik NL4 connectors plus screw
terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 53 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 120°
Vertical Coverage: 60°
Directivity Factor (Q): 8.1 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 6.9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 94 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 120 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 375 W / 750 W / 1500 W
AES Standard Power Rating4: 700 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 2 x JBL 228J, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in) edge
wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm
(1.5 in) voice coil
High-Frequency Waveguide: PT-D126HF-1 (field rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M8 rear for OmniMount® 60.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to 5.2
sq mm (10 AGW) wire or max width 9 mm (.375 in) spade lugs.
NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings,
use WRC or WRX.
Dimensions (H x W x D): 679.5 x 238.0 254.0 mm
(26.75 x 9.37 x 10 in)
Weight: 18.6 kg (40.9 lb)
|
F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 8 ohm.
Features:
- Compact box speakers for music and voice paging distribution
- Excellent sound quality
- Octagonal horn design for smooth coverage
- Adjustable high frequency dispersion
- Extruded cabinet design improves low frequency performance
- Individual protection circuit on each component
- Paintable grille and enclosure
- Wall/ceiling-mount bracket included
- Optional board, cluster and pole-mount brackets
- OmniMount-compatible (Series 20.5CA/WA)
- Optional subwoofers, model HB-1, FB-100 or FB-120
- Five year warranty
Specifications:
- LF Driver: 8” cone woofer
- HF Driver: 1” hard-dome tweeter
- Crossover: 2.5kHz
- Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
- Sensitivity (1W, 1m): 93dB SPL
- Dispersion (adjustable):
110° H x 100 ° V
80° H x 80° V
| Installation version with integrated surface mount bracket. The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement. The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise.
The ZX1ʼs long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1.25” voice coil titanium diaphragm true compression driver for maximum output with extended frequency response. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.
The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizontally or vertically for the ultimate in coverage flexibility. The ZX1ʼs molded polymer enclosure is inherently water resistant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage monitor.
Features:
- Extremely Smooth, Wide Frequency Response
- Attractive, Clean Design with Full Grille
- EV8L 8” High-Output LF Transducer
- DH2005 1” Exit True Compression Driver
- 90° x 50° Coverage Pattern
- Rotatable Horn Design
- Integral Monitor Angle on Enclosure
- 200W Cont., 800W Peak Power Handling
- High Sensitivity, 123 dB Maximum SPL
- Integrated surface mounting bracket
Specifications:
- Sensitivity 1W/1m 94 dB
- Max. SPL / 1m (calc); full space 123 dB
- Coverage (nominal -6dB) H° 90 °
- Coverage (nominal -6dB) V° 50 °
- System Power Handling (continuous/program/peak) 200/400/800 Watts
- Nominal Impedance (Passive) 8 Ohms
- Chassis Size 8 inches
- Weight Net 8.4 kg ( 18.52 lbs )
- Dimensions (HxWxD) 451 x 282 x 263 mm (17.76" x 11.1" x 10.35“)
|
Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Key Features:
- Compact enclosure
- 205 mm (8 in) LF transducer
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm
(1 in) exit compression driver
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 52 Hz - 20 kHz
Frequency Response (+/-3 dB): 63 Hz - 19 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 93 SPL dB/1W/1m
Rated Maximum SPL (1m)2: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 250 W / 500 W / 1000 W
AES Standard Power Rating4: 375 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5
in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (Field Rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm
(18.5 x 9.4 x 10.0 in)
Weight: 12.8 kg (28.2 lb) |
Reviews
There are no reviews yet.