| Content |
• Rack-mounting amps-preamps with a power of 120/340/480W, 100V/70V line or low impedance for PAM-120A.
• They are fitted with 6 preamplifiers including a bass/midrange/ treble adjustment and a separate adjustment of input level (microphone or line).
• A key located on all inputs allows operation of a Phantom power supply to connect an electret microphone on each input.
• A key located on the first two inputs enables to give priority to such inputs by fading.
• These devices are also fitted with a 4-tone chime that can be remote controlled with a microphone station, a master input and an L/S line selector.
• For the sound quality to be refined, keys located at the front panel enable to adjust the level of each input individually, the "general” bass/treble level as well as the general level.
Features:
• 6 Mic/line inputs (3 pin XLR)
• 2 Module option slots
• Link input (¼” jack)
• Amp input (¼” jack)
• Pre amp out (¼” jack)
• External chime (screw terminal)
• Zone mic interface (15 pin D-type)
• External mute (screw terminal)
• Individual EQ per input channel
• Individual phantom power (per mic input)
• Priority mic 1, mic 2 (switchable)
• 5 Zone loudspeaker selector
• Bar graph VU metre
• Optional 19” rack kit (BKT-PAM)
• 3U high
• Emergency message facility
- MODULAR DESIGN
Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-120A/340A/480Aʼs audio capabilities.
- INDIVIDUAL INPUT GAIN CONTROLS
Rear-panel gain controls for each input channel for total control of individual levels.
- SPEAKER SELECT
Six speaker select switches enable you to select any combination of up to five speakers.
- SELECTABLE PRIORITY MUTING
Switchable audio signal priority for Channels 1 and 2, Chime and Telephone input over other input sources.
- REMOTE CONTROL INPUT (only PAM-340A/480A)
Individual speaker zones can be selected and chime can be operated by wired remote control.
- ANNOUNCEMENT CHIME
Convenient four-tone chime for use with announcements.
- EM(EMERGENCY) - OPTIONAL EMERGENCY VOICE IC (only PAM-340A/480A)
When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.
|
Rated Output Power
|
PAM-120A(THD 1%) : 120W (RMS)
PAM-340A(THD 3%) : 340W (RMS)
PAM-480A(THD 3%) : 480W (RMS)
|
|
Frequency Response
|
|
Amp In
|
80Hz~20kHz
|
|
Link In
|
80Hz~15kHz
|
|
CH1~CH6
|
120Hz~8kHz
|
|
Remote In
|
120Hz~8kHz(PAM-340A, PAM-480A)
|
|
T.H.D.(at 1kHz Rated Output)
|
Less than 1%(PAM-120A)
|
|
T.H.D.(at 1kHz Half Power Output)
|
Less than 0.5%(PAM-340A, PAM-480A)
|
|
S/N
|
|
Amp In
|
Better than 90dB(PAM-120A)
Better than 88dB(PAM-340A/480A)
|
|
Link In
|
Better than 65dB
|
|
CH1~CH6
|
Better than 50dB
|
|
Remote In
|
Better than 50dB(PAM-340A/480A)
|
|
Input Sensitivity/Impedance
|
|
CH1~CH6
|
|
TRIM VR -60dB Position
|
1mV/10kΩ
|
|
TRIM VR -16dB Position
|
158mV/10kΩ
|
|
Link In
|
100mV/10kΩ
|
|
Amp In
|
1V/47kΩ(PAM-120A)
1V/20kΩ(PAM-340A/480A)
|
|
Remote In
|
1V/10KΩ(PAM-340A/480A)
|
|
Speaker Output/Impedance
|
PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω
PAM-340A : 340W, 100V/29.4Ω
PAM-480A : 480W, 100V/20.8Ω
|
|
Preamp Output/Impedance
|
1V/600Ω
|
|
Tone Control (100Hz, 10kHz)
|
±12dB
|
|
CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)
|
±12dB
|
|
|
|
|
|
|
|
Power Source
|
100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)
|
|
|
(Supplied AC mains transformer depends on country requirements)
|
|
Power Consumption
|
PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)
PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)
PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)
|
|
Weight
|
PAM-120A : 13kg/28.7lb
PAM-340A : 13.5kg/29.7lb
PAM-480A : 15.5kg/34.2lb
|
|
Dimensions
|
420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in
|
|
Operation Temperature
|
14F~104F (-10°C~+40°C)
|
※ Specifications and design subject to change without notice.
|
The Crown 135MA is a high value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 135MA provides 3 inputs (each with a volume control) and a 35W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.
Features
- 3 inputs (each with a volume control), and one 35W amplifier output channel
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications
- Minimum Guaranteed Power into 8 ohms or 70V/100V Output: 35W
- Frequency Response (at 1 watt from line out): 50Hz to 20kHz +/-1dB; 19Hz to 34kHz +0, -3dB
- Signal to Noise Ratio (ref. to rated power, master volume at minimum):
Mic: > 58 dB.
Line: > 60 dB.
Telephone: > 60 dB.
Inputs 2 or 3 (and 4 in 160MA): > 78 dB - THD+N:
|
- HIGH POWER, LOW DISTORTION
120W of RMS power with less than 1% THD.
- ADVANCED PROTECTION CIRCUITRY
Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.
- BATTERY BACKUP
Can be powered by 24VDC battery for emergency backup and true portability.
- SLIM DESIGN, COMPACT SIZE
Streamlined design fits in a compact 3RU space.
|
PA- 2312
|
|
Rated Output (RMS, THD 1%, 1kHz)
|
120W
|
|
Input Sensitivity/Impedance
|
1V/10kΩ, Balanced
|
|
T.H.D
|
Less than 1%
|
|
S/N
|
Better than 95dB
|
|
High Pass Filter
|
-3dB at 400Hz
|
|
Channel Separation
|
Less than –70dB
|
|
Output Voltage/Impedance
|
EC, JAPAN: 4Ω/22V, 41Ω/70V, 83Ω/100V
|
USA/CANADA: 4Ω/22V, 5.2Ω/25V, 41Ω/70V
|
|
Power Source
|
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
|
|
Power Consumption(1/8 Power)
|
290W
|
|
Weight
|
20Kg/44.1Ib
|
|
Dimensions
|
482(W) x 132(H) x 280(D)mm/19(W) x 5.2(H) x 11(H)in
|
|
| | - SPEAKER SELECT(5ZONE SPEAKER OUTPUT) Six speaker select switches enable you to select any combination of up to five speakers. - SELECTABLE PRIORITY MUTING Switchable audio signal priority for MIC Channels 1, siren, Chime and Telephone input over other input sources. - MONITOR SPEAKER You can monitor output signal by using the monitor speaker, and can control the monitor level on front panel by 3 step lever switch. - ANNOUNCEMENT CHIME Convenient four-tone chime for use with announcements. - REMOTE CONTROL INPUT Individual speaker zones can be selected and chime can be operated by wired remote control. - EM(EMERGENCY) When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted. - REMOTE POWER You can turn on/off amplifier by remote control. - INDIVIDUAL INPUT GAIN CONTROLS Rear-panel gain controls for each input channel for total control of individual levels. - MODULAR DESIGN Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-510/520ʼs audio capabilities. ACCESSORIES One detachable AC power cord is provided for use with this product. | | | | | | | PAM-510 | PAM-520 | | Amplifier Section (Amp In@1kHz, 4Ω Load Output) | Rated Output Power (THD 1%) | 120W(RMS) | 240W(RMS) | | Speaker Zone 1~5 Output | 25W MAX | 50W MAX | | Input Sensitivity/Impedance | 1V/20kΩ | | S/N | Better than 85dB | | Frequency Response (at 1kHz Half Power Output, ±3dB) | 80Hz~18kHz | | Mic Input Section (Mic 1~4 In@1kHz, Preamp Out) | Input Sensitivity/Impedance | –60dBV/600Ω | | S/N | Better than 55dB | | Frequency Response (±3dB) | 120Hz~10kHz | | Tone Control (Bass:100Hz,Treble:10kHz) | ±12dB | | Phantom Power | +24VDC | | Line Input Section (Line 1~2 In@1kHz, Preamp Out) | Input Sensitivity/Impedance | –30dBV/10kΩ | | S/N | Better than 65dB | | Frequency Response (±3dB) | 80Hz~15kHz | | Tone Control (Bass:100Hz,Treble:10kHz) | ±12dB | | Remote Amp Section (Remote In@1kHz, Preamp Out) | Mic Input Sensitivity/Impedance | –60dBV/600Ω | | S/N | Better than 55dB | | Frequency Response (±3dB) | 120Hz~10kHz | | Tel In Section (Tel In@1kHz, Preamp Out) | Input Sensitivity/Impedance | 0.3V/600Ω(USA/Canada) | | 0.775V/600Ω(EC & Associated) | | S/N | Better than 65dB | | Frequency Response (±3dB) | 330Hz~3kHz | | Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In) | 0dBV/600Ω | | | T.H.D | Less than 0.5% | | Record Out | –10dBV/3kΩ | | Operating Temperature | –10°C~40°C | | Power Source | 100–120VAC or 220–240VAC; 50/60Hz, 24VDC | | Power Consumption (1/8 POWER) | 180W | 320W | | Weight | 17kg/37.6lb | 19kg/42lb | | Dimensions | 482(W) x 132(H) x 398(D)mm 19(W) x 5.2(H) x 15.7(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
- Easy installation in practically any 12V battery equipped car.
- Compact, rugged construction and front panel controls.
- Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
- Unidirectional dynamic microphone with talk switch.
| Specification |
|
|---|
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | | Power Consumption | 9A or less at rated power output. | | Output Power | Rated 60W, max. 120W | | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | | Distortion | Less than 5% (at 1kHz rated output) | | Frequency Response | 100 ~ 10,000Hz | | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | | Dimensions | (W x H x D): 178 x 50 x 170mm (mounting device excluded) | | Weight | 1.2 kg | | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (12A) ... 1
Connection cord ... 1 set | | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
The Crown® 160MA is a high-value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.
FEATURES
- 4 inputs (each with a volume control), and one 60W amplifier output channel
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable
- Warranty completely protects your investment and guarantees its specifications
|
Reviews
There are no reviews yet.