JBL JRX-115 Passive speaker 250W RMS 8ohm

The JRX115 is a 15 inches two-way front-of-house speaker with 1000 watts peak power capacity and 250 watts continuous.

All JRX100 series models are constructed of carpet-covered, ?" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To ensure durability, JBL constructs these enclosures with advanced adhesives and closely mechanically spaced fasteners, while competitive systems typically rely on glue. Non-resonant, all metal handles are used and an 18 gauge, full metal grille protects the drivers. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.

Specifications:

System type: 15" 2-way sound reinforcement speaker
Frequency Range (-10 dB) 2: 38 Hz - 16 kHz
Frequency Response (± 3 dB) 2: 50 Hz - 12.5 kHz
Sensitivity (1w/1m): 98 dB SPL
Nominal Impedance: 8 ohms
Power capacity:1 250 watts
Peak power capacity:1 1000 watts
Maximum SPL: 128 dB
Nominal dispersion: 90° x 50°
Crossover frequency: 1.6 kHz
Dimensions (H x W x D): 699mm x 460mm x 432mm (27.5" x 18.1" x 17“)
Weight: 27.4 kg (61 lbs)
High frequency driver: JBL 2412 1" exit compression driver mounted on Progressive Transition? Waveguide
Low frequency driver: JBL M115-8A
Input connectors: Neutrik? Speakon? NL-4 (x1); ?" TS phone jack (x1)
Enclosure construction: 19mm (? in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet
Grille: 18-gauge, powder-coated steel
Mounting & suspension: 35mm, cast aluminum pole-mount socket

• Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
• Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
• Stainless steel bracket
• 15" high-output LF transducer with 2" voice coil
• RCF Precision Neo 1" Compression Driver with 1.5" voice coil
• 90° x 60° constant directivity horn
• 10° X 20° enclosure sides for array configurations
• Active Mosfet Compression Driver Protection
• 12 brass suspension points (M10)
• Line transformer

• Frequency Response -10 dB: 75 Hz ÷ 20 kHz
• Max SPL @ 1m: 129 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 60°
• Directivity index; Q: 13.3
• System Sensitivity: 98 dB
• Nominal Impedance: 16 Ω
• Power Handling: 300 W
• Peak Power Handling: 1200 W
• Protections: dinamyc
• Crossover frequencies: 1300 Hz

• Compression Driver: 1" HF driver, 1.5" voice coil
• Nominal Impedance: 8 Ω
• Input Power Rating: 25 W AES
• Sensitivity: 108 dB
• Woofer: 15" woofer, 2.5" voice coil
• Nominal Impedance: 16 Ω
• Input Power Rating: 250 W AES
• Sensitivity: 98 dB

• Input connector: 4-adriges Neopren Kabel, 5m
• Constant voltage transformer: 70/100 V
• Power Selection: 70V/60W, 30W , 100V/120W, 60W

• Cabinet Material: Polyethylene rotomoulded
• Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
• Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
• Colour: grey

• Height: 463 / 18.22 mm/inch
• Width: 463 / 18.22 mm/inch
• Depth: 433 / 17.04 mm/inch
• Net Weight: 19.4 / 42.76 kg/lbs

The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18

The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.

The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.

The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.

Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.

Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.

The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.

Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.

Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.

Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.

C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required

Features:

• Tough, paintable exterior coating
• Dual cast-frame 15" drivers
• Frequency response: (-10dB) 42Hz - 16kHz
• 1,000W program handling, 2,000W peak
• Sensitivity: 99dB
• 20“W x 46“H x 24“D
• 101 lbs.