JBL PRX 812W Active speaker 12inch

Features

- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points

The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of  transportation and road worthiness.

The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.

The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?

The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.

Technical Data

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)

Features

    400 Watt digital bi-amplification
    128 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    12" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 128 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 12" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 637/25 mm/inch
    Width: 384/15.11 mm/inch
    Depth: 363/14.2 mm/inch
    Net Weight: 20.2/44.53 kg/lbs

• 2-way active 12” bass reflex PA speaker
• High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
• Multi-purpose design for fullrange, satellite and monitor applications
• Application presets for quick frequency response contouring
• BEM optimized HF waveguide for uniform coverage
• 12” custom woofer and BMS compression driver
• DynX® DSP technology for distortion-free performance
• 2 line/mic input channels with individual gain controls plus mono mix out
• 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points

Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.

The full range 12" two-way, SRX812P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBLʼs long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBLʼs flagship touring systems.