KEF KUBE 12B Active subwoofer 12inch 300W

Explore new dimensions in sound with Kube, KEF’s powerful range of subwoofers that open up sound’s hidden depths.

Each elegantly designed, fully sealed unit unleashes explosive power effortlessly, intuitively, intelligently. iBX technology extends the bass depth dynamically, unlocking the full potential of the driver’s power at normal listening levels or even the most extreme. And with KEF’s unique capability to design, build and integrate the driver in-house, we take optimisation to a whole new level. Delivering immersive music and home theatre sounds that drive you deeper into the heart of the performance.

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

User's Manual

AVAILABLE IN THESE COLOR FINISHES

System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122

AVAILABLE IN SIX COLOR FINISHES

Length    No
Accessories    Mic, mic stand, remote control
Amplifier    390 watts Dynamic/195 watts RMS Power
Auto On/Off    Yes
Cabinet Design    Extended Excursion Down-firing port
Color    Black Ash Wood Grain
Dimensions: (H/W/D)    16.75” x 15.25” x 17” (includes feet and grille) (42.5 x 38.7 x 43.1 cm)
HiPass Crossover    80 Hz, 6 dB/octave
LoPass Crossover    40 - 120 Hz adjustable (12 dB octave, 24 dB ultimate)
Phase Control    0, 90, 180, 270 Degrees
Removable Grille    Yes
Shipping Weight    39 lbs. (18 Kg)
Size    Large
Voice Coil    2-Layer copper
Warranty (N. Am.)    Two years (electronics & drivers - parts & labor)

Low Frequency Limit:    27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit:    40 - 120Hz Variable
Power Output:    500W RMS (1000W Peak)
Low Pass Filter Alignment:    Active 4th order 24dB/Octave (2nd stage filter)
Cabinet Specification:    25mm construction and internal bracing
Cabinet Alignment:    sealed cabinet
Driver Complement:    1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
External Dimensions:
(H x W x D)
inc. amp & driver    340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
External Dimensions:
(H x W x D)
inc. feet & grille    375mm (15“) high with feet
430mm (16 15/16“) deep
inc amp & grille
Mains Input Voltage Specification:    110 - 120 Vac / 220 - 240 Vac 50/60Hz
Individual Weight:    22.56 Kg (49.63 lb)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

With the Impact-Mini you get amazing bass in a tiny cabinet that is almost the same size as the MiniVee-8, but at a very budget-friendly price. This engineering marvel is lightweight with an aluminum cone, furniture-quality cabinet finish and concentrates its 300 watts of output power in the 38 Hz to 140 Hz range. This is Velodyne's lightest weight subwoofer and includes an adjustable low pass crossover frequency so you can easily match the Impact-Mini to your satellite speakers.


Features



Compact, stylish cabinet; high-value subwoofer

6.5" active and 8" passive andonized aluminum woofers

High quality, long throw drivers

2" copper-wound voice coil for exceptional reliability

Down-firing bass radiator for more output, less distortion

"Green” MDP amp rated at 300 watts Dynamic power