KEF T305 HOME CINEMA SPEAKER SET 5.1

For the full cinema-like experience, the ultimate T Series system has the best of everything: T301s all round, supported by the same discreet high performance subwoofer. However big your living area, it envelopes you in an expansive, richly textured sound picture that brings a movie to life as youʼve never experienced before.

    T301 / T301c
Design     Two and a half-way closed box
Drive units     2 x 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 150 W
Sensitivity (2.83V/1m)     91dB (wall mount)
88dB (floor stand mount)
Maximum output (SPL)     110dB
Impedance     8Ω
Internal volume     1.4 Litres
Weight     1.5kg (3.3lbs)
Dimensions
(H x W x D)     600* x 140 x 35 mm
(23.6 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 600 x 35 mm
(5.5 x 23.6 x 1.4 in.)
Finish     Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.


      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Weight     13kg (28.6lbs)
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.

System Format:    2 Way
Frequency Response:    60 Hz - 60 kHz
Sensitivity (1W@1M):    87 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    110.8 dBA
Power Handling (RMS):    100 W
Recommended Amplifier Requirements (RMS):    50 - 100 W
Bass Alignment:    Sealed Cabinet
Crossover Frequency:    Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment:    1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)

310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands:    11.9 Kg (26.1 lbs)

System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)

310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)

AVAILABLE IN SIX COLOR FINISHES

Driver Complements
Satellites
Mid/Woofer     4 - 3 1/4" Diameter (8.26cm)
Dynamic Balance bi-laminate composite cone drivers
Tweeter     4 - 3/4" Diameter (1.91cm)
Silk polymer dome tweeter
Center
Midrange     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance bi-laminate composite cone drivers
Tweeter     1 - 3/4" Diameter (1.91cm)
Silk polymer dome tweeter
Electrical
Overall Frequency
Response     90Hz-24kHz
Lower -3dB Limit     120 Hz
Upper -3dB Limit     20kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     91 dB
Inputs     Gold-plated 5-way binding posts with metal caps
Dimensions
Satellites
Cabinet Size     7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Weight     3.00 lbs. (1.36kgs)
Mounting Options     keyhole slot; .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Weight     4.50 lbs. (2.04kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.00 lbs. (9.07kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

Driver Complements
Satellites
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response     85HZ - 31kHz
Lower -3dB Limit     110Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight     4.70 lbs. (2.13kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.30 lbs. (9.21kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories
(comes with)    Satellite wall mount bracket

Dimensions | Metric :46-1/4" W x 4-1/8" D x 5-3/8" H: speaker only, not including bracket | 117.5 x 10.5 x 13.7 cm
Driver Complement :Three 4-1/2" BDSS drivers with Axially Aligned 1" pure aluminum dome tweeters; Two 4-1/2" BDSS High-output full-range drivers; Four 3-1/4" full-range high-output surround drivers
Frequency Response :50 Hz – 30 kHz
Accessories :Wall bracket; Leveler Feet
Sensitivity :90dB
Recommended Associated Amplifier Power :20 – 200 watts
Inputs :Five pairs of 5 way binding posts
A/V Receiver Crossover Setting :100 Hz
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Impedance :Compatible with 8 Ohms outputs
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler feet
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years