KODA KDT-515 Driver 40W 8ohm

39.67 incl. GR VAT

Only 4 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Power 100W, Resistance 8 Ohm, Sensitivity 102 DB, Frequency Response 1,5-18KHz, Dimensions Φ90x65mm, Fits on speaker Koda PA-9015. Coil‘s Diameter Φ34mm

 

Read more

  • Power 100W,
  • Resistance 8 Ohm,
  • Sensitivity 102 DB,
  • Frequency Response 1,5-18KHz,
  • Dimensions Φ90x65mm,
  • Fits on speaker Koda PA-9015.
  • Coil‘s Diameter Φ34mm
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “KODA KDT-515 Driver 40W 8ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

KODA KDT-515 Driver 40W 8ohm removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-12 Driver 106,5dB 16ohm removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeJBL 2447J removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity remove
NameKODA KDT-515 Driver 40W 8ohm removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-12 Driver 106,5dB 16ohm removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeJBL 2447J removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity remove
ImageB & C Speakers DE-12 Driver 40WRMS, 106,5dB 16ohm
SKUKDT515DE-85DE-12 16DE-452447JDE-750TN
Rating
Price 39.67 incl. GR VAT 206.66 incl. GR VAT 74.76 incl. GR VAT 136.15 incl. GR VAT 916.00 incl. GR VAT 359.00 incl. GR VAT
Stock

Only 4 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOnly 4 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 50 W continuous program power capacity
  • 1" horn throat diameter
  • 36 mm (1.4 in) aluminium voice coil
  • Polyester diaphragm
  • 1500 - 18000 Hz response
  • 106 dB sensitivity
Content
  • Power 100W,
  • Resistance 8 Ohm,
  • Sensitivity 102 DB,
  • Frequency Response 1,5-18KHz,
  • Dimensions Φ90x65mm,
  • Fits on speaker Koda PA-9015.
  • Coil‘s Diameter Φ34mm

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

General

Product type Compression driver
Brand B&C Speakers
Reference DE12
Product code DRV01216

Informations

Nominal impedance 16 ohm
Dimensional category 3.5 inch
Manufacturer sensitivity 106 dB
Nominal power handling 20 W
Bandwidth 1500÷18000 Hz
Recommended min cutoff frequency 2200 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.19 mH

Datas

Flux density 1.45 T
Zmin 10.9 ohm
Weight ~1 kg

Dimensions

Voice coil diameter 1.4 inch
Outside diameter 90 mm
Depth 49 mm
Driver dimensions mouting holes 5.0 mm
Driver mounting system 2 points on diameter 76 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Polyester

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.


150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 16Ω
Driver 2“, 110W, 107.5dB, 0.5-18kHz, Titanium, 6.3kg The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.   Highlights   - 220 watt continuous program power capacity - 3" (75mm)aluminum voice coil - Titanium diaphragm - Copper shorting cap for extended HF response - 107.5 dB sensitivity - 2" (horn throat diameter) bolt-on format (4-bolt) - 500 – 18000 Hz response
Weight0.50 kg4.50 kg1.5 kg2.00 kg6.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 4.50 kg
Weight 1.5 kg
Weight 2.00 kg
Weight 6.00 kg
Weight 5.00 kg