KRAMER 708 Composite Video & Mono Audio over Twisted Pair Receiver

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

Input    1 mixed video-audio signal 1Vpp/75? on a BNC type connector.
Outputs    1 composite video, 1Vpp/75? on a BNC type connector.1 audio stereo (L, R), 1Vpp/100? on RCA connectors.
Bandwidth (-3Db)    7 MHz.
Diff. Gain    0.4 %.
Diff. Phase    0.17 Deg.
Video S/N Ratio    72 dB.
Power Source    230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.4 VA.
Dimensions     16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”, W, D, H.).
Weight     0.78 kg. (1.7 lbs.) approx.
Accessories    Power cord.
Options    RK-50RN rack adapter holds two units in two vertical rack spaces.

INPUT:    4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on a BNC connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUTS:    4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
OUTPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
BANDWIDTH (-3dB):    400MHz (Y).
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.3kg (0.25lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

INPUT:    1 video, 1Vpp/75Ω on an RCA connector.
OUTPUTS:    5 video, 1Vpp/75Ω on RCA connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    400MHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.15Deg.
K-FACTOR:   

Input    1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs    4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution     8 or 10-bits, automatic.
Operation Standards    143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking    Automatic up to 30dB of cable loss.
Display    Power ON LED.
Dimensions (w,d,h)    12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight     0.3kg. (0.67 lbs.) approx.
Power Source    12VDC, 250 mA.
Options    RK-T1, RK-T3 rack adapters.