| Content |
You?re mixing FOH for a gig. That means the speakers are over there,
and you?re over here.Is it any wonder that your headphones sound confusing?
We all know that even short distances cause time delays. As a consequence,
listening on headphones when you?re any distance from the stage will leave you
with a confused mess of direct and delayed sound.
Enter Can-D. It?s simple really; Can-D delays your headphones so that they match
the sound from the speakers. With delay times of up to 678ms, you can be 226m
from the stage and still wallow in the sweet sound of time-coherent cans.
And if you like your cans exceptionally loud, you?ll be happy to know that with Can-D?s
substantial headphone amplifier, 9 out of 10 engineers found full volume to be 'unbearably
loud'.
Of course, Can-D is rock-solid and tour-proof; its internal PSU and solid aluminium case
ensure it?s ready for anything you can throw at it. Or anything you can throw it at.
Specifications.
Connectors
Power input: IEC
Audio input: 6 .35 mm jack socket
Audio output: 6 .35 mm jack socket & 3.5 mm
jack socket
Audio
Delay 0 to 67 8 milliseconds
0 to 226 metres
0 to 763 feet
Attenuation 0 to ?80dB
Frequency response: 20 Hz?20 kHz (-0.1 dB/+0.1 dB)
Signal to noise ratio: >98 dB (output load of 70 Ω)
Maximum input level: +16 dBu
Input impedance 10 kΩ
Maximum output power: 325 mW into 70Ω
THD + noise: 0.010% (max power into 70Ω, 1
kHz)
General
Power consumption: 8 VA
Dimensions (mm): 105 W x 185 D x 43 H
Weight: 0.58 kg
|
HeadAMP - Four Output Stereo Headphone Amp Overview
Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).
HeadAMP - Four Output Stereo Headphone Amp Specifications:
Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included)
Total Harmonic Distortion |
- Distributes the signal of 1 audio source to 4 sets of headphones
- 4 channels with separate level controls and headphone outputs
- All connections via 6.3 mm (1/4“) jacks
- Operation via supplied power unit
|
Plug In, Rock Out! The headphone guitar amp that lets you enjoy serious guitar sound, fast.
Jamming late at night? Donʼt want to wake the neighbors? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime. The amPlug series received wide-ranging acclaim from guitarists around the world for delivering incredible guitar tone in a pocket-sized unit. The NEW amPlug 'Acoustic' quickly creates shimmering, rich acoustic guitar sounds. Two distinct sounds are available using the Fat/ Bright switch. The Blend combines the acoustic tone with the original signal for just the right mix! In combination with electric guitar's own tone controls and pickup selection, the sound variation is unlimited. The ultra-long battery life provides up to 27 hours of extended enjoyment! At home, in the studio and on the go, amPlug Acoustic delivers superb acoustic guitar sounds anytime, anyplace. 'Lead' is based on a US-made high-gain boutique amp, further modified for lead guitar. It also contains a digital delay effect, delivering a huge, spatial sound that could not be previously obtained, and giving you a rich and full-fledged lead sound that you can play anytime and anywhere. 'Bass' is modeled on VOX's classic AC100 bass amp, and expands its potential with a full-range tone that supports today's bass sounds. A compressor/boost effect provides not just compression but also a thick overdrive sound, giving you the perfect tones for performing in any style. Careful attention has been paid to the sound quality, and a high-quality FET buffer circuit has been used to obtain even greater dynamic range. The oringial models are still available in three different sound styles: VOX AC30, Classic Rock, based on a UK-made amplifier head, and Metal, based on a California-made high-gain amplifier head. Even with its ultra-compact size, amPlug perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube, as well as the powerful high gain produced by a large amp stack. Using all new analog modeling technology, amPlug delivers full-fledged amp sound. - Plugs directly into your guitar/ bass —a great-sounding headphone guitar amp that gives you serious sound fast.
- Now available in six styles: Lead, Bass, VOX AC30, Classic Rock, Metal and Acoustic.
- AUX in jack lets you jam along with your CD/MP3 player.
- 100% analog circuit faithfully simulates the response of the original amps.
- 'Lead' delivers hi-gain lead guitar sounds, plus a digital delay effect.
- 'Bass' features a full-range bass sound with a compressor/boost effect.
- AC30 emulates the AC30 top boost sound of a vintage VOX AC30.
- Classic Rock gives you the great high-gain sound of a UK-made 100W amp.
- Metal delivers the explosive roar of US high-gain metal sound.
- 'Acoustic' features Fat/Bright switch which offers two types of acoustic sounds.
- 'Acoustic' also features blend control which mixes the acoustic tones with your original signal for just the right mix.
- Up to 15 hours of battery life with two Alkaline AAA batteries.
- Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound.
With its completely analog design, great care was also taken with amPlug's gain circuitry. The 'AC30' uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. 'Classic Rock' uses four classical gain circuits to deliver that great sound. 'Metal' uses two stages of ultra-high gain plus a mid-cut circuit, giving you modern metal high-gain sound anywhere and anytime. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced. amPlug can be used in numerous ways
With up to twenty seven hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player. amPlug is your fastest ticket to great tone – anytime, anywhere! VOX amPlug Specificaitons - Power supply: two AAA batteries
- Battery life: with alkaline batteries: approximately 27 hours (with zinc-carbon batteries: approximately 10 hours.)
- Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39" x 3.15" x 1.22"
- Weight: 40g /1.41oz. (not including batteries).
- Included items: two AAA zinc-carbon batteries
| Behringer HA-400 Ultra-Compact 4-Channel Stereo Headphone Amplifier
Mini to the max! You can use this super-compact stereo headphone amplifier with practically all headphones?four of them at the same time, to be exact! For example, you can let up to 4 different people in your studio listen to the main mix while the recording is being made, and each listener can determine his own volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are included for outstanding audio performance?these are the same op amps found in ?full-size? audio equipment?plus, a DC 12-Volt adapter is included.
If you are one of those musicians who like to deck out their equipment with lots of bells and whistles, the HA400 definitely makes a great addition to the functionality of your studio.
The Behringer HA400 offers flexible amplification for up to 4 headphones. Whether you're tracking a full band, playing to a backing track, or just listening to your mix, this compact amp gives every performer diverse volume control.
Hear everything with clarity. The HA400 promises high audio quality with zero interference, no matter what headphones you use. Behringer are relied upon by professional musicians everywhere. With the HA400 headphone amplifier, you'll become a part of 50+ years of innovation and expertise.
The Highest Quality Monitoring Possible
Great monitoring is at the heart of a tight performance. Whether you're on stage or in the studio, the HA4000 delivers ultimate control for everyone playing. Discover the highest quality audio from 4 high power, stereo amplifiers. Even at maximum volume, this tidy headphone amp provides clear sound without muddiness or unwanted noise.
Industry Leading Standard
There's a reason why Behringer are leaders in their field. With 50+ years of industry experience, they've built a legacy around exceptional build quality and innovative design. The HA4000 is no exception. Every channel preserves the original sonic qualities of your input signal. That's performance you can trust.
Features
- Ultra-compact headphone amplifier
- Ideal for stage or studio use
- Full control for every channel with 4 independent stereo high-power amplifier sections
- Extremely high audio quality with virtually all types of headphones, even at maximum volume
- 12V DC power adapter included
- Designed and engineered by Behringer in Germany
Specifications
Line Inputs
-
-
- Type: 1/4'' TS Jack, Stereo
- Impedance: 100kohms
- Max. input level: +15dBu
Headphone Outputs
-
-
- Type: 1/4'' TRS Jacks, Stereo
- Impedance: Approx. 80ohms
- Max. output level: Approx. 40mW in 100ohms
Power Supply
-
-
- Power supply: External power supply 12V
Dimensions/Weight
-
- Dimensions: 47mm (H) x 57mm (W) x 104mm (D)
- Weight: 0.32kg
|
- Ultra-compact monitor headphone amplifier for studio and stage applications
- Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
- Flexible Mic In and Mic Through connectors plus Ground Lift switch
- Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
- High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
- DC 12 Vadapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
|
Reviews
There are no reviews yet.