Data sheet – D1001S [697,2 KB] Battery disposal information [77,1 KB] Our top vocal microphones. These low-feedback dynamic supercardioid microphones feature a broad frequency spectrum, low distortion at high sound pressure levels, and “shockproof” capsule mounting for minimal handling noise. Suitable for all demanding stage and studio applications. Capsule type: Dynamic Polar pattern: Supercardioid Frequency […]
Our top vocal microphones. These low-feedback dynamic supercardioid microphones feature a broad frequency spectrum, low distortion at high sound pressure levels, and “shockproof” capsule mounting for minimal handling noise. Suitable for all demanding stage and studio applications.
Capsule type: Dynamic
Polar pattern: Supercardioid
Frequency response: (Hz) 50 – 16000
Sensitvity (dBV/pa): -54 (2.0 mv/pa)
Rated Impedance (ohm): 300
Dimensions (mm) 52 x 165
Max.SPL (dB) 134 dB (THD
Connector: 3Pin, XLR-type gold plated pins
Extra features: ON/OFF switch (lockable)
Weight
0.30 kg
Reviews
There are no reviews yet.
Be the first to review “LD SYSTEMS D1001S Dynamic Vocal Microphone with Switch” Cancel reply
Data sheet - D1001S [697,2 KB]Battery disposal information [77,1 KB]
Our top vocal microphones. These low-feedback dynamic supercardioid microphones feature a broad frequency spectrum, low distortion at high sound pressure levels, and "shockproof” capsule mounting for minimal handling noise. Suitable for all demanding stage and studio applications.
Capsule type: Dynamic
Polar pattern: Supercardioid
Frequency response: (Hz) 50 - 16000
Sensitvity (dBV/pa): -54 (2.0 mv/pa)
Rated Impedance (ohm): 300
Dimensions (mm) 52 x 165
Max.SPL (dB) 134 dB (THD
Connector: 3Pin, XLR-type gold plated pins
Extra features: ON/OFF switch (lockable)
Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter
The first Neumann microphone with a dynamic capsule. Functionally optimized design
specifically for the broadcast field, featuring integrated pop protection, suppression of
structure-borne noise and a hypercardioid directional characteristic.
Emotion conveyed with technical perfection. This is the ideal which the Neumann
microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the
requirements of professional broadcast studios and the individual, functionally optimized
design* ensure that these are microphones of character.
The BCM 705 is Neumann?s first dynamic microphone. The housing and headgrille are
identical to those of the BCM 104; only the green logo indicates that this is something new
from Neumann. The principle of reduction to the essentials can be seen in the dynamic
capsule with a hypercardioid directional characteristic, specifically designed for speech
reproduction at close range. Multi-level isolation from structure-borne noise ensures operation
free of interference, even in a lively studio environment.
Mechanical Features
The microphone headgrille twists off easily for quick cleaning. Neumann offers optional,
color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her
individual headgrille. Iin front of the capsule, mounted on a frame holder, a fine gauze serves
as a built-in popscreen.
The microphones of the Broadcast Line have an elastic mount against structure-borne noise,
that is compatible with standard broadcast-segment microphone arms.
Acoustic features
The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the
speech intelligibility. The bass frequency response is designed to compensate for the overemphasis
of the bass caused by the proximity effect.
The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also
efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from
settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.
Mounting
The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio
boom arm.
A thread adapter to fit different connector threads is included. In order to provide protection from
structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.
The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.
FEATURES:
Dynamic capsule
Hypercardioid directional characteristic
Characteristic, functionally optimized design*
Integrated, neutral pop protection
Integrated elastic suspension
Individual headgrilles for different users
Colored rings to identify the replacement headgrilles
Easy removal and cleaning of microphone headgrille (with bayonet mount)
Mechanical compatibility with standard studio boom arms
Multi-level isolation from structure-borne noise
No power supply required
APPLICATION HINTS:
Announcer's mic for broadcasting and studio
This is just one of the most common applications. We recommend
additional experimentation to gain maximum use from this microphone.
TECHNICAL DATA:
Acoustical operating principle Pressure gradient transducer
Directional pattern Hypercardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 10 kohm 1,7 mV/Pa = ?55,4 dB ± 1 dB
Rated impedance 200 ohms
Rated load impedance >= 10,000 ohms
Equivalent SPL CCIR 468-3 32 dB
Equivalent SPL DIN/IEC 651 18 dB-A
S/N ratio CCIR 468-3 62 dB
S/N ratio DIN/IEC 651 76 dB
Weight 500 g
Diameter 64 mm
Length 85 mm
Height (without suspension) 110 mm
Supercardioid Polar Pattern
Laminated Varimotion Diaphragm
Integrated 80 Hz High-Pass Filter
Integrated Hum-Compensating Coil
WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field
Mono
Operating Principle
Pressure Gradient
Capsule
Dynamic
Polar Pattern
Supercardioid
Circuitry
Solid-State
Pad
None
High-Pass Filter
80 Hz
Performance
Frequency Range
70 Hz to 20 kHz
Maximum SPL
147 dB SPL
Impedance
600 Ohms
Load Impedance
2000 Ohms
Sensitivity
2.6 mV/Pa
Signal-to-Noise Ratio
76 dB A-Weighted
Equivalent Noise Level
18 dB A-Weighted
Connectivity
Output Connectors
1 x XLR 3-Pin
Physical
Dimensions
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm
Weight
11.29 oz / 320 g
WITH XLR SWITCH ON/OFF
Polar pattern
supercardioid
Frequency range
70 Hz to 20 kHz
Sensitivity
2.6 mV/Pa (-52 dBV)
Max. SPL
147/156 dB SPL (for 1% / 3% THD)
Equivalent noise level
18 dB-A
Impedance
= 2000 ohms
Connector
3-pin XLR
Finish
matte grayish blue
Dimensions
length: 185.2 mm (7.3 in.); diameter: 51 mm (2 in.)
Net weight
340 g (12 oz.)
Shipping weight
655 g (1.45 lbs.)
Patent(s)
Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651)
The P 3 S microphone is ideal for backing vocals, guitar, wind instruments and many other applications. It has a metal case and wire mesh grill to ensure exceptional ruggedness.
Key Features:
Rugged performance microphone designed for backing vocals and instruments
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Data sheet – D1001S [697,2 KB]
Reviews
There are no reviews yet.