| Content | Quality 1 millisecond ahead … the LD Systems DDQ 12 active speaker.
The LD Systems DDQ 12 is an extremely high-performance 2-way active speaker for compact systems, FOH and monitor applications, delay lines, and permanent installations. The groundbreaking design and comprehensive features with leading components ensure superior performance in its class.
Trouble-free operation of the DDQ 12 is ensured by a specially programmed Sharc DSP with 24-bit/48-kHz converters that have remarkable dynamics of 127dB. It incorporates volume control, delay, EQ, crossover, phase, and all protection functions for the drivers and power amps. Heat sinks and a silent fan provide additional protection against overheating. The decisive advantage is attained by a predictive peak limiter with a look-ahead time of 1 millisecond. It guarantees absolute freedom from distortion even at maximum volume.
The DDQ 12 is loaded with a 12” Faital Pro PR300 neodymium woofer and a BMS tweeter. The asymmetrical tweeter horn offers optimal, even sound level distribution from the very first to the very last row of the audience. Its design ensures extraordinarily dynamic, linear reproduction up to 20 kHz. The two drivers are powered separately by two Class D Hypex UCD400 power stage modules with an output of 400W RMS each. They have a load-controlled, linear frequency response and extremely low total harmonic distortion with extremely low noise and, thanks to their switching power supply, maximum efficiency. The maximum sound pressure level of the DDQ 12 is 134 dB with a dispersion angle of 80° x 50°; the horizontal sound distribution is characterized by extraordinary symmetry.
The input, link, and switchable subwoofer output of the DDQ 12 take the form of XLR sockets. A ground lift switch eliminates ground loop hum, and the system functions are indicated by LEDs.
The sturdy bass-reflex enclosure is made of 15mm birch plywood with a structured coating and a front grille made of steel. There is an integral 50° angle for use as a floor monitor and the tweeter horn can be turned accordingly. It has an adjustable tilt stand mount. The innovative Evolutive handles and the low weight facilitate transport. The DDQ 12 active system is made in Germany.
Type: Active
Woofer size: 12“
Woofer size: 305 mm
Woofer impedance: 4 ohms
Woofer magnet: neodymium
Woofer brand: Faital Pro (12PR300, 4 ohms)
Woofer voice coil: 2,5“
Woofer voice coil: 63.5 mm
Tweeter size: 1“
Tweeter size: 25.4 mm
Tweeter impedance: 8 ohms
Tweeter magnet: ceramic
Tweeter brand: BMS
Tweeter voice coil: 1“
Tweeter voice coil: 25.4 mm
Dispersion angle (H x V): 80° x 50°
AD/DA converter: 24-bit / 48 kHz
DSP: Sharc
Amplifier: 2 x Class D, Hypex Ucd400
Power output (RMS): 2 x 400 W
Frequency response (Hz): 54 - 20,000 Hz
Crossover frequency: 1.500 Hz
Max. SPL (continuous): 121 dB
Max. SPL (peak): 134 dB
Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, overvoltage, overcurrent
Integral media player: no
Controls: Gain dB, x-over sub, ground lift, power switch
Indicators: Operate, signal, peak limit, X-over sub
Line inputs: XLR
Line outputs: Input Link XLR, Sub Out XLR
Cabinet material: 15mm birch plywood
Cabinet surface: PA painting
Cabinet type: bass reflex
Monitor angle: 50°
Width: 360 mm
Height: 600 mm
Depth: 378 mm
Weight: 17 kg
Features: LD SYSTEMS Evolutive handles, 36 mm stand mount, vertical tilt (SM707: ± 13,5° in seven increments)
DSP characteristics:
Bit depth AD/DA converter: 24 bits
Internal sampling frequency: 48 kHz
Signal/noise ratio: 127 dB |
The full range 12" two-way, SRX812P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBLʼs long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBLʼs flagship touring systems. |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 50Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 131dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Floor Wedge, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 26“
Width 15“
Depth 15.4“
Weight 49 lbs.
Manufacturer Part Number KW122
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)
|
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications. |
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
- Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX three-handle design for easy lifting.
ELX200-12P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers,
three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.
ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
| Available Color |
Black |
| Connector Type |
(1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLR |
| Coverage (Nominal -6 dB) H |
90° |
| Coverage (Nominal -6 dB) V |
60° |
| Crossover Frequency |
1700Hz |
| Depth |
344mm (13.5“) |
| Enclosure Material |
Polypropylene Composite |
| Family |
ELX200 |
| Frequency Range (-10 dB) |
51 Hz – 20 kHz |
| Frequency Response (-3 dB) |
57 Hz – 16 kHz |
| Grille |
18 AWG steel with powdercoat |
| Height |
629mm (24.8“) |
| HF Transducer |
DH-1C 1-inch titanium compression driver |
| LF Transducer |
EVS-12M 300 mm (12 in) |
| Max. SPL/1m (calc) |
130dB |
| Power Consumption |
100 - 240 V~, 50 - 60 Hz, 1.8A |
| Power Rating |
1200W |
| Powered or Passive |
Powered |
| Shipping Weight |
17.7kg (39 lbs) |
| Speaker Type |
Full-Range |
| Suspension |
(3) M10 suspension points |
| Weight Net |
15.6kg (34.4 lbs) |
| Width |
363mm (14.3“) |
| Woofer Size |
12inch |
|
Reviews
There are no reviews yet.