Content | User's Manual
Data sheet
The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.
The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 -120 Hz.
The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.
The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.
- Type: active
- Version: DSP-controlled
- Woofer size: 18“
- Woofer size: 457.2 mm
- Woofer magnet: neodymium
- Woofer brand: Faital Pro
- Woofer voice coil: 4 "
- Woofer voice coil: 76.5 mm
- Amplifier: Class D
- Power output (RMS): 2 x 700 W
- Frequency response: 30 Hz - 120 Hz
- Max. SPL (continuous): 126 dB
- Max. SPL (peak): 134 dB
- Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, short circuit, overvoltage
- Controls: Gain dB, DSP Preset, Ground Lift, DSP/Gain enable, Power
- Indicators: DSP/ Gain disable, Peak Limit, Signal, Operate
- Line inputs: 2
- Line input connectors: XLR
- Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
- Line output connectors: XLR
- Power supply: switching power supply
- Operating voltage: 180-264V ~ / 47-63 Hz
- Cabinet material: 18 mm plywood
- Cabinet surface: polyurethane
- Cabinet type: bass reflex
- Width: 510 mm
- Height: 700 mm
- Depth: 725 mm
- Features: 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters
|
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.
- Application: Subwoofer
- Output Power: 600 Watt
- Built-in stereo X-over
- Very punchy High-power Subwoofer for Bands and DJʼs
Model | PR:O 18 Sub A | Title | PREMIUM PR:O | Product Class | Active Systems | Frequency response +/- 3 dB | 48 Hz – Xover | Frequency response -10 dB | 38 Hz – Xover | Maximum SPL, @ 10% THD | 125 dB | Connections | 2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced | LF Speaker | 1x18“ | X-Over | 75 Hz – 150 HZ, switchable | Subsonic filter | 35 Hz | Peak limiter | yes | RMS-Soundlimiter | no | Amplifier | 600 W Class D – 4 ohms | Pole mount | M20 threaded base plate | Handles | 2, integrated | Enclosure | MDF | Grille | metal grille with acoustic foam | Finish | acrylic painture, black | Dimensions (WxHxD) | 53 cm x 61 cm x 64 cm | Weight | 39,8kg / 87.8 lbs. |
|
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via three presets, sub/top system-match, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 132 dB peak SPL utilizing ultraefficient, high-sensitivity transducer designed and engineered by EV.
- Ideal for portable and installed applications. Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
ELX200-18SP features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 132 dB SPL utilizing transducers designed and engineered by EV (18-inch EVS-18L woofer). Powered subwoofer models allow easy setup via three presets (Music, Live, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall
settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and compact 15-mm wood enclosures, integrated M20 threaded pole polemount plate, and two-handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
Available Color |
Black |
Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
Depth |
574mm (22.6“) |
Specifications |
Enclosure Material |
15 mm plywood with EVCoat |
Family |
ELX200 |
Frequency Range (-10 dB) |
40 Hz – 145 Hz |
Frequency Response (-3 dB) |
47 Hz – 105Hz |
Grille |
18 AWG steel with powdercoat |
Height |
600mm (23.6“) |
LF Transducer |
EVS-18L 457 mm (18 in) |
Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
Max. SPL/1m (calc) |
132dB |
Power Consumption |
100 - 240 V~, 50 - 60 Hz, 1.8A |
Power Rating |
1200W |
Powered or Passive |
Powered |
Shipping Weight |
33.1kg (73 lbs) |
Speaker Type |
Subwoofer |
Weight Net |
29kg (63.9 lbs) |
Width |
507mm (20“) |
Woofer Size |
18inch |
|
DBTechnologies' new subwoofers H Series offer remarkable specifications and user-friendliness. With 1500W (2000W Peak Power) and a high-performance 18' woofer with 8' coil, the Sub 18H is especially suited for small to mid-sized events, where high performance needs to be packaged into compact size. Thanks to their unique configuration, termed Hybrid Horn-Loading, the boxes can be tuned to the lowest frequencies to improve system efficiency and convey a deep, enveloping sound. Unlike conventional horn loaded systems, 15H and 18H subs ensure excellent efficiency even at close listening distance, which makes them suited for use even in small venues. | The JBL EON718S 18-inch subwoofer is part of JBL’s new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level.
Features
Custom-engineered 18-inch woofer
Power: 1,500W peak / 750W RMS
Frequency response: 31?150 Hz (-10 dB); 40?120 Hz (-3 dB)
Max SPL: 131 dB
Audio I/Os: 2 XLR Combo, 2 XLR loop-outs
Advanced dbx DSP: Parametric EQ, polarity inversion, speaker delay
Built-in 2-channel digital mixer
Parametric EQ, polarity inversion and speaker delay
Color backlit LCD screen provides easy access to functions
Durable birch plywood cabinet with patented DuraFlex finish and metal grille
Universal JBL Pro Connect app control using powerful BLE technology
Ergonomic handles simplify transport
Built-in threaded pole mount expands system configuration options
Stackable cabinets simplify cardioid configurations and equipment storage
Dimensions: 26.3 x 24 x 25.1 in (667 x 609 x 637mm) (HxWxD)
Weight: 81.5 pounds (37 kg)
Shipping dimensions: 29.6 x 28.42 x 29.3 x (744 x 722 x 752 mm) (HxWxD)
Shipping weight: 94.4 pounds (42.8 kg)
7 years warranty is included. |
Reviews
There are no reviews yet.