User’s manual LD Systems STINGER 8 A G3 Active 8″ 2-way bass-reflex PA speaker 2-way active 8” bass reflex PA speaker High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL Multi-purpose design for fullrange, satellite and monitor applications Application presets for quick frequency response contouring BEM optimized HF waveguide for uniform coverage […]
LD Systems STINGER 8 A G3 Active 8″ 2-way bass-reflex PA speaker
2-way active 8” bass reflex PA speaker
High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
Multi-purpose design for fullrange, satellite and monitor applications
Application presets for quick frequency response contouring
BEM optimized HF waveguide for uniform coverage
8” custom woofer and BMS compression driver
DynX® DSP technology for distortion-free performance
2 line/mic input channels with individual gain controls plus mono mix out
12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Shock-resistant front grill provides maximum speaker protection
36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
Large selection of smart installation and transport accessories
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
8 “
Woofer Size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 “
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 “
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 “
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
70 – 20000 Hz
Max. SPL (peak)
125 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 – 120 V / 50 – 60 Hz or 200 – 240 V / 50 – 60 Hz (automatic switching) , Switching Power Supply
Operating Temperature
0 – 40 °C
Relative Humidity:
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
457 mm
Depth
290 mm
Weight
10,8 kg
Weight
10.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems LDEB82AG3 STINGER 8″ active PA Speaker 300W RMS” Cancel reply
LD Systems STINGER 8 A G3
Active 8" 2-way bass-reflex PA speaker
2-way active 8” bass reflex PA speaker
High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
Multi-purpose design for fullrange, satellite and monitor applications
Application presets for quick frequency response contouring
BEM optimized HF waveguide for uniform coverage
8” custom woofer and BMS compression driver
DynX® DSP technology for distortion-free performance
2 line/mic input channels with individual gain controls plus mono mix out
12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Shock-resistant front grill provides maximum speaker protection
36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
Large selection of smart installation and transport accessories
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
8 "
Woofer Size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
70 - 20000 Hz
Max. SPL (peak)
125 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply
Operating Temperature
0 - 40 °C
Relative Humidity:
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
457 mm
Depth
290 mm
Weight
10,8 kg
8’’ bi-active two way plastic speaker with Media Player
Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
Woofer 8’’ VC 1,5”
Driver 1’’ VC 1”
Line output XLR OUT + ¼” JACK OUT
Line input XLR IN + 2 x RCA
Mic input XLR IN + ¼” JACK IN
Rms power AB class 120 + 30 W
Peak power 300W
Frequency response 60hz-20khz
Peak spl 123 dB
Power supply AC110V/AC230V
Frequency response (-3 dB) 1
60 Hz to 20 kHz
Frequency range (-10 dB) 2
50 Hz to 20 kHz
Max. SPL 3
121 dB
Coverage angle (H x V)
100° x 100°
Amplifier rating
400 W
LF transducer
8 in. woofer - ferrite magnet
HF transducer
1 in. titanium dome, neodymium magnet, ferro-fluid cooled
Crossover frequency
2.5 kHz
Connectors
2 - XLR/TRS Combo
1 - 3.5mm Stereo
1 - Charge port
1 - TRS footswitch
1 - 12 V DC power output
Enclosure
Polypropylene
Grille material
Powder coated steel
USB charging
1.5 A max., device-dependent
Color
Black & white
Dimensions (H x W x D)
400 mm x 275 mm x 272 mm
15.75 in. x 10.83 in. x 10.71 in.
Net weight
7.6 kg
16.8 lb
Shipping weight
11 kg
24.3 lb
Power consumption 4
100 - 240 V~, 50 - 60 Hz, 0.8 - 0.6 A
Battery capacity
86.4 Wh
Battery run time (at max output) 5
6+ hours
Battery run time (at moderate output) 6
12+ hours
1 Full space measurement using music DSP preset.
2 Half-space measurement.
3 Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
4 Current rating is 1/8 power.
5 Maximum output before loudspeaker limit indication, with typical program material.
6 Moderate output is approximately 95 dB SPL, with typical program material.
2-way bi-amplified, bass-reflex design
200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
optional wall bracket mount thread, 35mm (1 3/8”) top-hat
one integrated pocket handle
Code:
41212
Configuration:
2 way
Built-in amplifier LF/HF:
700/200 W RMS
Built-in amplifier peak LF/HF:
1400/400 W
Frequency response:
65Hz-20kHz -6dB
Low Frequency woofer:
8 - 2 coil inch
High Frequency driver:
1 - 1.4 coil inch
Maximum SPL cont/peak:
123/131 dB
Dispersion:
80°x50° rotatable HxV
Input impedance:
22 Kohm
AC Power requirements:
640 VA
Input connector:
XLR with loop, RCA ST
Power cord:
5/16.4 m/ft
Net Dimension (WxHxD):
274x500x300 / 10.8x19.7x11.8 mm/inch
Net Weight:
15.6/34.39 Kg/lb
Transport Dimension (WxHxD):
395x620x375 / 15.5x24.4x14.7 mm/inch
Transport Weight:
15.3/33.7 Kg/lb
User's manual - LDSATG2 [4,73 MB]
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
Product Type: installation monitor
Type: active
Woofer Size: 8“
Woofer Size: 203.2 mm
Woofer Magnet: ferrite
Woofer Brand: custom-made
HF Driver Size: 1“
HF Driver Size: 25 mm
HF Driver Magnet: ferrite
HF Driver Brand: custom-made
Amplifier (A): Class A/B
Dispersion Angle (H x V): 60° x 60°
Power Output (RMS): 80 W
Frequency Response: 50 Hz - 20,000 Hz
Max SPL: 114 dB
Protection: overcurrent, HF drivers
Controls: volume, power switch (on/off), power mode (on/auto)
Indicators: Power, Overload
Line Input Connectors: 6.3 mm TRS, XLR
Line Output Connectors: XLR
Power Supply: transformer
Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
Cabinet Material: 12 mm MDF
Cabinet Surface: textured coating
Cabinet Colour: black
Cabinet Type: bass reflex
Width: 274 mm
Height: 410 mm
Depth: 243 mm
Features: wall bracket
Features
- Powered 2-way, full-range system
- 8″ bass loudspeaker
- Compression driver with titanium diaphragm
- Multiple mounting options
- Stand mountable
The DR-508A is powered full-range system that uses a new 8” low frequency transducer. The M-34 compression driver handles high frequency reproduction.
The 1000 W peak power Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the DR-508A one of the smallest and most powerful portable cabinets on the market.
Technical Data
Nominal Amplifier Power
1000 W peak, 500 W continuous
Class D, Biamplified
Frequency Range (-10 dB)
60 Hz-20 kHz
Rated Peak SPL at 1 m
122 dB
Dispersion
90º x 45º
Enclosure Material
Polypropylene
Color/Finish
Black
Connectors
IN: Female XLR
LOOP THRU: Male XLR
AC IN: powerCON
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User’s manual
Reviews
There are no reviews yet.