LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY

Original price was: €66.48.Current price is: €58.64. incl. GR VAT

Only 5 left in stock

EAN: 4049521041020
Installments calculation
CompareAdd to wishlist Submit Better Price
User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes […]

 

Read more

pdf User´s Manual

LD Systems LDI02
DI Box active

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),

extremely low battery consumption. Battery: 9 V block (not included).

Product type DI Boxes


Channels 1


Inputs 2


Input connectors 6.3 mm Jack , XLR


Max. input level + 10 / + 30 dBu dBu


Input impedance 1 M Ohm(s)


Outputs 1


THRU outputs/channel 1


Output connectors XLR


Frequency response 20 – 20.000 Hz


THD


Indicators Power


Controls ground lift , Power


Operating voltage +48 V phantom power , 9 V block


Cabinet material metal


Cabinet surface painted


Width 135 mm


Depth 128 mm


Height 53 mm


Weight 0,645 kg

Weight 0.70 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removePALMER AUDIO PDI09 TOOLS Guitar DI-box removeSTEWART ADB1 ACTIVE D.I BOX removePALMER AUDIO PAN02 TOOLS Active DI-box removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeOMNITRONIC LH-053 PASSIVE DI BOX remove
NameLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removePALMER AUDIO PDI09 TOOLS Guitar DI-box removeSTEWART ADB1 ACTIVE D.I BOX removePALMER AUDIO PAN02 TOOLS Active DI-box removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeOMNITRONIC LH-053 PASSIVE DI BOX remove
Image10355053 lh 053 di box balance unbalance
SKULDI02PDI09ADB1EPAN02ADB4ELH-053
Rating
Price Original price was: €66.48.Current price is: €58.64. incl. GR VAT Original price was: €172.31.Current price is: €100.06. incl. GR VAT Original price was: €189.15.Current price is: €164.56. incl. GR VAT Original price was: €103.65.Current price is: €68.20. incl. GR VAT Original price was: €672.58.Current price is: €585.13. incl. GR VAT Original price was: €31.71.Current price is: €26.96. incl. GR VAT
Stock

Only 5 left in stock

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

In stock (can be backordered)

AvailabilityOnly 5 left in stockAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 1 high-impedance signal input, 6.3 mm jack
  • 1 low-impedance XLR output
  • 6.35 mm jack input, and output
  • Converts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer
  • Switchable input attenuation: 0 dB, -20 dB, -40 dB
  • Rugged black metal housing
Contentpdf User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg

Passive DI box especially designed for guitars.

The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow“, "Normal“, or "Bright“.

Technical specifications:

  • Input: 6.3 mm jack with parallel "THRU" socket
  • Output: male XLR transformer balanced
  • Attenuator: (Level switch) 0 dB for line signals, -15 dB for small amps up to 10 w, 30 dB for large amps up to 200 w
  • No battery necessary

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.

You're serious about getting rid of all that excess noise on stage, but you've got so many line
instruments you don't know where to start. The ADB-4 from Stewart can take care of all your
high impedance problems. The ADB-4 is 4 active direct boxes, all in a module that only takes
up half a space on your keyboard rack. It's a rugged, durable piece of equipment that packs a
lot of DI power.

? Requires phantom power or 9v battery
? Ground lift switch
? Instrument or speaker level switch
? Transformerless
? Can be used with amp up to 400w
? RF shielding

Little brother of the LH-055 DI Box. Sturdy housing, solid workmanship at an unbeatable price. 1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal (e.g. to a guitar amplifier) 1 low-impedance output (XLR) Black housing

Passive 1-channel DI box, black

  • 1 high-impedance signal input, 6.3 mm jack
  • 1 low-impedance XLR output
  • 6.35 mm jack input, and output
  • Converts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer
  • Switchable input attenuation: 0 dB, -20 dB, -40 dB
  • Rugged black metal housing

Package contents

  • 1 x device, 1 x user manual
Frequency range: 15 - 30000 Hz
S/N ratio: >95 dB
Impedance: Input: 50 kOhm Output: 600 Ohm
Input attenuation: 0 dB, -20 dB, -40 dB; switchable
Control elements: Groundlift selector
Connections: Input: 1 x 6.3 mm plug (unbal.) Link: 1 x 6.3 mm plug (unbal.) Output: line via 1 x 3-pin XLR
Dimensions: Width: 12,7 cm Depth: 7,4 cm Height: 4,5 cm
Weight: 440 g
 
Weight0.70 kg0.29 kg0.50 kg0.31 kg0.50 kg0.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.70 kg
Weight 0.29 kg
Weight 0.50 kg
Weight 0.31 kg
Weight 0.50 kg
Weight 0.70 kg

Recently Viewed Products