Content |
Battery disposal information [77,1 KB]
Frequenzy List [246,1 KB]
LD Systems MEI100G2
The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 80 Hz - 15 kHz ± 3 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 8,5 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, mono/stereo, AF level (left/right)
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 212 mm
- Height: 38 mm
- Depth: 90 mm
- Accessories (included): Antenna, power supply, headphones
|
- Replace the HDMI cable in a meeting room with a wireless connection between a laptop and a display or projector.
- Plug & play: no app or software required.
- No need to connect to a (Wi-Fi) network.
- Supports video resolutions up to Full HD 1080p/60Hz.
- Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
- Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
- Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.
Video/audio
|
|
Video resolution |
1080p@60Hz |
PC resolution |
Max. 1920 x 1080 |
HDMI standard |
HDMI 1.4 / HDCP 1.3 |
Audio formats |
PCM stereo |
Technology
|
|
Operational frequency |
5 GHz |
Operating range |
Up to 20 metres LOS (line of sight) |
Latency (delay) |
<120 ms |
Video compression |
H.264 |
Transmitter
|
|
AV input |
1 x HDMI |
USB input |
1 x micro-USB (PC, laptop) |
Dimensions (h x w x d) |
83 x 32 x 13 mm |
Weight |
27 grams |
Receiver
|
|
AV output |
1 x HDMI |
USB input |
1 x micro-USB (PC, laptop) |
Dimensions (h x w x d) |
83 x 32 x 13 mm |
Weight |
27 grams |
General
|
|
Ambient temperature |
0 ~ 40 °C |
Ambient humidity |
20% ~ 90% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Use's manual [3,48 MB]
Battery disposal information [77,1 KB]
|
|
| LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set
The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!
Specifications MEI ONE Transmitter:
- Fixed Frequencies:
- LDMEIONE1T: 863.700 MHz
- LDMEIONE2T: 864.100 MHz
- LDMEIONE3T: 864.900 MHz
- RF output power: 10 dBm
- Gain adjustment range: + 40 dB
- Max. audio input level: + 6 dBV
- Front panel controls: Power On / Off, Headphones Level
- Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
- Input: 2 x XLR / 6.3 mm Jack (combo)
- Power requirement: 12 - 18 V DC, 300 mA External Power Supply
- Operating temperature: -10°C to +50°C
- Dimensions (W x H x D): 212 x 38 x 96 mm
|
|
The P9R is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. It offers premium features like RF Scan and Automatic Gain Control for unparalleled RF stability and channel availability, all packed in the thinnest form factor available. Patent-pending CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels from one bodypack for quick and easy reference.
Features:
Ultra-thin, low profile bodypack allows discreet placement on the performer
Enhanced digital stereo encoder provides an expansive soundstage for excellent audio clarity and detail
RF Scan: stand where the artist will be on stage and instantly check RF level
Automatic Gain Control greatly prevents signal dropout due to RF overload and allows more channels to be used simultaneously
Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
Separate, easily visible audio and RF status indicator LED's
Audio level and battery life metering
Selectable high-frequency EQ boost (+3/+6 dB @ 10 kHz)
Volume and balance controls
Extruded aluminum construction for rugged dependability
Specifications:
Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency
Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
RF Sensitivity (20 dB SINAD): 2.2 µV
Squelch Threshold (±3 dB SINAD): 22 dB SINAD
Adjacent Channel Rejection: >70 dB
Intermodulation Attenuation: >70 dB
Blocking: >80 dB
Image Rejection: >100 dB
Audio Output Power (1kHz @ |
Description
The PROCAB TST200 Cable Tester comes with all audio and electronics industry standard inputs, such as XLR Male/Female (3-pin/5-pin), 3.5 mm jack, 6.3 mm jack, DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11, BNC. The unit has separate 'Sender' and 'Receiver' units, which are able to be locked together for ease of transport, or split apart for testing cables at either end of a signal chain.
Simply plug in either end of an audio cable into the "A" and "B" side of the device, then select your mode to check signal continuity across all active pins or conductors. The brightly coloured LED's will light up indicating signal continuity and which pins are connected together. The inbuilt speaker of the TST200 also beeps when a successful connection is made between the Sender and Receiver units. If not all connections are made, no beep will sound, and the faulty connection's LED will not be lit.
Thanks to the split unit design means you can test both cables you have on hand, as well as longer cables that are already set up. This time saving feature removes the hassle of packing down your cables just for testing. The sender unit (B) includes a switch to select the speed in which the connections are tested, as well as the power switch.
This two-part cable tester is reliable and durable, whether it be on the road or in the studio. Both the A and B units are powered separately, and each side requires 9V battery power.
Product features
Dimensions |
165 x 168 x 45 mm (W x H x D) |
Construction |
Plastic |
Application |
AV & IT |
|
Rental & MI |
Series |
Bulk & Accessories |
|
- Supports video resolutions up to Full HD 1080p/60Hz.
- Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
- Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
- Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.
- Connect up to 20 HDMI transmitters to a single HDMI receiver and easily switch between presenters with a press of a button.
- Use your smart phone or tablet (Android or Apple) to stream content wirelessly to the receiver via the built-in AirPlay or Miracast function (screen mirroring).
Video/audio
|
|
Video resolution |
1080p@60Hz |
PC resolution |
Max. 1920 x 1080 |
HDMI standard |
HDMI 1.4 / HDCP 1.3 |
Audio formats |
PCM stereo |
Technology
|
|
Operational frequency |
5 GHz |
Operating range |
Up to 20 metres LOS (line of sight) |
Latency (delay) |
<120 ms |
Video compression |
H.264 |
Transmitter
|
|
AV input |
1 x HDMI |
USB input |
1 x micro-USB (PC, laptop) |
Dimensions (h x w x d) |
83 x 32 x 13 mm |
Weight |
27 grams |
General
|
|
Ambient temperature |
0 ~ 40 °C |
Ambient humidity |
20% ~ 90% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Reviews
There are no reviews yet.