| Content |
Battery disposal information [77,1 KB]
Frequenzy List [246,1 KB]
LD Systems MEI100G2
The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 80 Hz - 15 kHz ± 3 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 8,5 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, mono/stereo, AF level (left/right)
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 212 mm
- Height: 38 mm
- Depth: 90 mm
- Accessories (included): Antenna, power supply, headphones
|
This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly. |
The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.
The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Input Connection: Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +5V - Batteries: Two 1.5V AA, not included
- Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
Depending on battery type and use pattern. - Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
- Net Weight: 81 g without batteries
|
| INPUT: |
1 HDMI on an HDMI connector |
| OUTPUT: |
1 HDBT on an RJ−45 female connector |
| EXTENSION LINE: |
HDBaseT 1.0 compliant;
Up to 40m (130ft) at 4K @60Hz (4:2:0);
Up to 70m (230ft) at full HD (1080p @60Hz 36bpp);
Note: When using Kramer HDBaseT cables |
| VIDEO: |
Up to 10.2Gbps bandwidth (3.4Gbps per graphic channel)
Up to 4K UHD @60Hz (4:2:0) 24bpp resolution
HDCP 2.2 signal compliance.
Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels,
Dolby TrueHD, DTS−HD, 2K, 4K, and 3D as specified in HDMI 2.0 |
| POWER SOURCE: |
5V DC, 2A |
| POWER CONSUMPTION: |
5V DC, 570mA |
| ENCLOSURE: |
Pico Tools size, aluminum type |
| COOLING: |
Convection ventilation |
| OPERATING TEMPERATURE: |
0° to +40°C (32° to 104°F) |
| STORAGE TEMPERATURE: |
−40° to +70°C (−40° to 158°F) |
| HUMIDITY: |
10% to 90%, RHL non−condensing |
| INCLUDED ACCESSORIES: |
Power supply unit |
| Product Dimensions |
6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96" ) W, D, H |
| Product Weight |
0.1kg (0.2lbs) approx |
| Shipping Dimensions |
15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H |
| Shipping Weight |
0.4kg (0.9lbs) approx |
|
The long throw antenna system is made up of three components; The ATCS-A60MX mixer the ATCS-A60RX receiver antenna and the ATCS-A60TX transmitting antenna.
ATCS-A60MX IR transmitter/receiver mixer
• The master antenna mixer can power up 4 transmitter antennas and 4 receiving antennas.
• Infrared transmission keeps the signal in the room. Therefore multiple conference systems can be used in
adjacent rooms and the conference stays secure.
• The ATCS-A60MX includes rack mount adaptors
ATCS-A60RX IR Receiving Antenna (green indicator)
• The high-power receiving antenna can work up to 15 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
ATCS-A60TX IR receiver antenna (red indicator)
• The high-power transmitting antenna can work up to 20 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
- IR transmitting unit terminal: BNC×4(75 ohms)
- IR receiving unit terminal: BNC×4(75 ohms)
- I/O terminal: BNC×1(75 ohms)
- Operating temperature range: 0 to +40C°
- Power consumption: 50W
- Power supply: 100 to 240VAC, 50/60 Hz
- Dimensions: 44 (H) x 420 (W) x 225 (D) mm
- Weight Approx.: 3.0 kg
- Accessories: AC cord, Rack-mount adapter x 2, Screw to attach the rack-mount adapter x
ATCS-A60TX ATCS-A60RX - Communication method: IR wireless system
- Operating frequency band: 8 to 10 MHz 1 to 5 MHz
- IR wavelength: 870 nm
- Modulation method: Frequency modulation
- Operating distance*: 20 m (TX) 15 m (RX)
- Operating temperature range: 0 to 40C°
- Connecting terminal: BNC jack
- Power supply: 24V dc supplied from the ATCS-A60MX
- Dimensions: 44 (H) x 149 (W) x 97 (D) mm
- Weight: 351 g (TX) 386 g (RX)
|
The P9R is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. It offers premium features like RF Scan and Automatic Gain Control for unparalleled RF stability and channel availability, all packed in the thinnest form factor available. Patent-pending CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels from one bodypack for quick and easy reference.
Features:
Ultra-thin, low profile bodypack allows discreet placement on the performer
Enhanced digital stereo encoder provides an expansive soundstage for excellent audio clarity and detail
RF Scan: stand where the artist will be on stage and instantly check RF level
Automatic Gain Control greatly prevents signal dropout due to RF overload and allows more channels to be used simultaneously
Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
Separate, easily visible audio and RF status indicator LED's
Audio level and battery life metering
Selectable high-frequency EQ boost (+3/+6 dB @ 10 kHz)
Volume and balance controls
Extruded aluminum construction for rugged dependability
Specifications:
Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency
Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
RF Sensitivity (20 dB SINAD): 2.2 µV
Squelch Threshold (±3 dB SINAD): 22 dB SINAD
Adjacent Channel Rejection: >70 dB
Intermodulation Attenuation: >70 dB
Blocking: >80 dB
Image Rejection: >100 dB
Audio Output Power (1kHz @ |
Reviews
There are no reviews yet.