| Content |
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
Black
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg | The SEM 710 Plus gives you more power for your money. This starter unit features a 10' heavy duty woofer and piezo tweeter, with power handling reaching 300 Watts (Program) or 150 Watts (RMS). The SEM 710 Plus Speakers complement the Powerpods 410 and 620 Plus perfectly to form a cost-effective audio solution for FOH application.
- Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
- Power handling: 150 Watts (RMS); 300 Watts (Program)
- Frequency response: 65 Hz ~ 20 KHz
- High sound pressure level, 96 dB SPL @ 1W / 1M
- 10' heavy-duty woofer and piezo tweeter 8 ohm nominal load
- Built-in handle
- 35 mm stand adapter built-in
- Dual 1/4' phone jacks
Cabin Type Wood
Function 2 way multi-use
Monitor Use Yes
Amplifier 150 Watts (RMS); 300 Watts (Program)
LF/MF, Woofer 10''
HF, Horn 1 ''
DSP Processor - Max SPL 96 dB
Dispersion 90x40
Frequency Response 65 Hz ~ 20 KHz
Pole mount -
Rigging -
Connector 2x1/4 jack
Dimensions 351x 491 x 314 (WxHxD)
Weight 11 Kg
Color Black |
The V10 is a compact, full range, extremely versatile two-way loudspeaker system. It offers substantial power and efficiency for a variety of professional applications that include portable systems, sound reinforcement, permanent installations and supplementary fill for larger systems. The high-frequency section is a constant directivity CMD horn mathematically designed for Coverage Matching Design in relation to the woofer system, loaded on a neodymium compression driver with a 2.5” diaphragm assembly for smooth, controlled dispersion. The low-frequency transducer is a tight, high power 10” mid-bass with a 2.5 ” voice coil
APPLICATIONS
- • Live performance
- • DJ set
- • Rental solutions
- • Permanent installations
General Specs
10" high power, 2.5" voice coil mid bass
1 x 2.5" high power titanium neo compression driver
130 dB max SPL
350 Watt AES
High output, response down to 55 Hz
Birch plywood cabinet
Weather resistant, textured, polyurea finish
Epoxy powder coated front grille
TRANSDUCERS
- Compression Driver:0“, 1.7" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:100 W PEAK, 50 WW AES
- Sensitivity:108dB
- Woofer:6“, 1.8" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:300 W PEAK, 150 WW AES
- Sensitivity:94dB
TRANSDUCERS
- Compression Driver:4“, 2.5" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:180 W PEAK 90 WW AES
- Sensitivity:98dB
- Woofer:10“, 2.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:500 W PEAK, 250 WW AES
- Sensitivity:110dB
Acoustical Specs
Frequency Response -10 dB:55 Hz ÷ 20000 Hz
Max SPL @ 1m:130 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:10
System Sensitivity:94 dB
Nominal Impedance:8 Ω
Power Handling:350 W
Peak Power Handling:1400 W
Recommended Amplifier:700 W
Protections:Dynamic
Crossover frequencies:1000 Hz
Cabinet Specs
Cabinet Material:15mm Birch Plywood
Hardware:Pole mount, 13 x M10
Pole Mount/Cap:yes
Grille:Custom perforated steel grille
Colour:black
Size/Weight
Height: 540 / 21.25 mm/inch
Width:340 / 13.38 mm/inch
Depth:333 / 13.11 mm/inch
Net Weight:15 / 33.06 kg/lbs |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
| Features |
|---|
| Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | | Stainless steel bracket | | One 10" high-output LF transducer with 2" voice coil | | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | | 90° x 40° constant directivity horn | | Built in passive crossover and selectable line transformer | | 10° X 20° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | | LICC (Low Impedance Compensated Crossover) network | |
12 brass suspension points (M8)
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 118 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 11 | | | System Sensitivity: | 95 dB | | | Nominal Impedance: | 16 Ω | | | Power Handling: | 200 Watt | | | Peak Power Handling: | 800 Watt | | | Recommended Amplifier: | 400 | | | Protections: | Dinamyc | | | Crossover frequencies: | 2000 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.5" HF driver, 1" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 106 dB | | | Woofer: | 10" woofer, 2.5" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 180 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 5m, 4-adriges Neopren Kabel | | | Constant voltage transformer: | 70/100 | | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
| CABINET |
|---|
| Cabinet Material: | Polyethylene rotomoulded | | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Grey | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 350 / 13.78 mm/inch | | | Width: | 350 / 13.78 mm/inch | | | Depth: | 320 / 12.60 mm/inch | | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
Description - Superior, crystal clear, sound quality from a compact full range speaker cabinet.
- The VIBE10 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
- Remarkable low frequency reproduction for a small sized cabinet
- Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
- Perfect for portable use: DJ, hiring companies, …
- VIBE10 Mk2 and VIBE15-SUB Mk2 make a perfect couple for more demanding situations.
- Solid, high strength, MDF enclosure
- Scratch resistant polyurethane painting
- Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
- Strong M8 Rigging Points
- Built-in 35mm Speaker stand adapter
- High Power 10inch (25cm) Woofer
- High Power 1,5inch Titanium Driver
- 2 Neutrik Speakon® connectors
- Specially designed Glass fiber horn
- Built-in heavy duty carrying handles
- Heavy duty rubber feet
Technical Information - Power Capacity: 200Wrms (400Wpeak)
- Input impedance: 8Ω
- Input Sensitivity: 95dB 1W/1m
- Max. SPL: 120dB
- Frequency response: 65 - 20.000Hz
- Nominal dispersion: 100° x 70° (HxV)
- Dimensions: 330 x 510 x 302 mm
- Weight: 15kg
| This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
Reviews
There are no reviews yet.