The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driveris operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peakpower. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. An IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input viaRCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to twohand-held transmitter microphones The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 “
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 “
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 – 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack
Mic inputs
2
Mic inputs
2 x XLR , 6.3 mm jack
Operating voltage
Switching power supply
Operating voltage
100 V – 120 V / 60 Hz , 220 V – 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
Weight
17 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems ROADBUDDY 10 BASIC Battery Powered Bluetooth Speaker with Mixer” Cancel reply
Class D power amplifier with 480 watts of peak power
2 combo sockets for microphone or line inputs
3.5 mm Aux input
Master section with 2-band EQ
Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
Content
The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driveris operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peakpower. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. An IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input viaRCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to twohand-held transmitter microphones The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 - 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack
Mic inputs
2
Mic inputs
2 x XLR , 6.3 mm jack
Operating voltage
Switching power supply
Operating voltage
100 V - 120 V / 60 Hz , 220 V - 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
Battery Powered Bluetooth Loudspeaker with Mixer
With built-in wheels and extension handles for carting convenience the LDRJ10 active 2-way system is your mobile sound station. It is powered by a rechargeable battery pack for up to 20 hours of continuous operation and provides a 90 Hz – 18 kHz frequency response with 100 watts of peak output.
The LDRJ10\'s integrated mixer features 3 channels with individual volume controls, 2-band EQ, adjustable reverb and master volume. Combo, 6.3 mm TRS jack, RCA and 3.5 mm TRS mini-jack connectors acommodate a wide variety of input sources.
A major feature permitting wireless streaming to the LDRJ10: the system sports a Bluetooth player which also supports SD card and USB storage devices. The player menu includes language selection and multiple genre specific EQ presets for instant sound adjustment.
The Roadjack 10 also features corners for cabinet protection, a stand mount insert and includes a convenient IR remote control.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
(wide range) 3 "
HF Driver Size
76.2 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
25 W
Peak power
100 W
Frequency response
65 - 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
117 dB
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Master Volume , Mic 1 Level , Mic 2 Level
Indicators
Charge/battery status , Power
Media player
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WMA file
Media player controls
Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 3.5 mm jack
Mic inputs
2
Mic inputs
3.5 mm jack , XLR
Operating voltage
Switching power supply
Operating voltage
100 V - 120 V / 60 Hz , 220 V - 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
15 mm MDF
Cabinet construction
vented
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,2 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz - 18 kHz
Speaker Tweeter
1" Compression Driver
Bass
8" Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 ") x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 ") Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories - Receiver Modules
Transmitters
See Accessories - Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
A professional 12" 500W Mobile Sound System featuring 2 UHF wireless microphones operating on different frequencies, remote control and integrated USB and SD slots for MP3 playing. This all in one system operates via mains or a 12V internal re-chargeable battery, powering a 12" main driver and a 1" HF driver. On the back there are 2 inputs and an echo effect for wired microphones, AUX line input, MP3 control unit, 5 controls for tonal adjustments etc. Due to this exciting system, premises and areas can be filled with an ear pleasing sound.
12" 500W active sound system
1" Titanium compression driver
BT receiver for audio streaming
Battery level indicator
Echo effect for microphones
Volume control for each UHF microphone
Integral USB, SD/MMC media player
Remote control for MP3 player
Mains or 12V battery operation
Integral trolley with telescopic handle
Rugged ABS case
Wattage: 500W
Frequency Response: 50 - 19.000 Hz
Type: Active Speaker
Speaker Type: 2-way Speaker
LF: 12" Cone
HF: 1" Voice Coil
Specifications: Playback options: Bluetooth, SD-Card, USB
Features: Battery: 12V - 12Ah, Frequency Handheld microphone 863.100 MHz, 864.500 MHz
Length: 350 mm
Width: 335 mm
Height: 570mm
Weight: 15.9 kg
Self-Amplifying Speaker 12" - 500W with Battery - 2 Wireless Microphones - Bluetooth Portable System 12"
Ideal for karaoke parties
RMS power 250W
Power MAX 500W
2 x Wireless UHF Handheld Microphones
2 x Inputs for Wired Handheld Microphones
1 x Input for guitar
Battery with autonomy 6-8 hours
Ability to power via external 12V DC battery
Echo & Delay Effects
Bluetooth receiver
SD CARD reader, USB, Radio, IR remote control
Jack for support on a speaker stand
Weight:14.95Kg
Power supply:
100-240 V AC, 50/60 Hz
Or
12 V DC
Protection class:
Protection class I
Output power:
80 W RMS
Power connection:
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Battery/battery pack
Battery pack type:
1 x lithium ion 12,8 V, 8000 mAh, 102,4 Wh
Battery pack:
Battery operation up to 4h depending on program used
Recharging time 4h
Frequency range:
50 - 20000 Hz
THD:
<0,1 % at 1 kHz
Sensitivity:
98 dB (1W/1m)
Max. SPL:
121 dB
Control elements:
Level control per channel, Echo effect control, Talkover
Status LED:
Power, limit, charge status indicator
Connections:
Input: line via 1 x 3.5 mm jack (stereo) mounting version
Input: line via 1 x stereo RCA
Input: mic/line via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Output: 3-pin XLR
Equalizer:
2-band tone control
Speaker:
1 x woofer 12" with ferrit magnet
1 x Tweeter 1"
Type of speaker:
Wireless PA system
Switch:
On/off switch
Material:
Plastic
Color:
Black
Dimensions:
Length: 31 cm
Width: 36 cm
Height: 56 cm
Weight:
13,12 kg
Audio player
Control:
Bluetooth; IR remote control
Bluetooth:
Version: 5 with stereo link (TWS)
Audio player:
USB + SD + Bluetooth
Range:
Bluetooth: range up to 20m
Frequency band:
2.4 GHz
Music format:
MP3, WMA
Available storage media:
USB devices/SD cards max. 32GB (FAT 32)
Microphone
Power supply:
3 V DC
Capsule type:
Dynamic
Polar pattern:
Cardioid
Battery:
2 x Mignon (AA) (not included)
Range:
Range up to 30m
Frequency band:
UHF 863 - 865 MHz
Dimensions:
Length: 24 cm
Diameter: Ø 5,1 cm
Remote control
Battery:
1 x Button cell 3.0 V CR2025 lithium manganese built-in
Features
Mobile 12" PA system with battery operation, audio player, Bluetooth and 2 wireless microphones
Portable all-in-one PA system with 80 watts output power
Cordless, flexible and versatile
3-channel power mixer
Power-efficient and battery-saving biamp amplifier with DSP control
Stereo Bluetooth link for wireless stereo operation with 2 systems linked together
2 mono input channels mic/line and hi-Z instrument (CH 2) with echo effect and feedback suppression
1 stereo input channel for internal audio player and external line signal sources with talkover switch
UHF receiver units and 2 matching wireless microphones
1 additional battery can be retrofitted for up to 8 hours operating time
Signal limiter and crossover, DSP-controlled
Common 2-band EQ for highs and lows
With accessory compartment
For application areas such as: Theater; mobile use; Wedding/gala/events; product presentations and lectures
Battery operation up to 4h depending on program used
Audio player
2.4 GHz license-free worldwide
Control via Bluetooth; IR remote control
Bluetooth: Operating range up to 20m
Microphone
Polar pattern: Cardioid
Operating range up to 30m
UHF 863 - 865 MHz License-free and approved in Europe
Package contents
2 x microphone, 2 x user manual, 1 x power cord, 1 x battery, 1 x compact cabinet speaker, 1 x declaration of conformity, 1 x battery pack, 1 x remote control, 2 x antenna
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.