The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driveris operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peakpower. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. An IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input viaRCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to twohand-held transmitter microphones The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 “
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 “
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 – 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack
Mic inputs
2
Mic inputs
2 x XLR , 6.3 mm jack
Operating voltage
Switching power supply
Operating voltage
100 V – 120 V / 60 Hz , 220 V – 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
Weight
17 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems ROADBUDDY 10 BASIC Battery Powered Bluetooth Speaker with Mixer” Cancel reply
Class D power amplifier with 480 watts of peak power
2 combo sockets for microphone or line inputs
3.5 mm Aux input
Master section with 2-band EQ
Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
Content
The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driveris operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peakpower. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. An IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input viaRCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to twohand-held transmitter microphones The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 - 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack
Mic inputs
2
Mic inputs
2 x XLR , 6.3 mm jack
Operating voltage
Switching power supply
Operating voltage
100 V - 120 V / 60 Hz , 220 V - 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
RoadMan 102 Slave Speaker Box to loop in until 20 units (incl. 24V DC rechargeable Battery and Power supply)
Product type
Battery-powered PA speaker accessories
Type
active, Follower loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Amplifier
Class D
System Power (RMS)
80 W
Peak power
320 W
Frequency response
70 - 16.000
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-Link Follower Volume, Power
Indicators
Charge/battery status
Line inputs
1
Line input connectors
Audio-link input XLR, female
Line outputs
1
Line output connectors
Audio-link output XLR, male
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC, 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Width
355 mm
Height
610 mm
Depth
315 mm
Other features
Stand mount 36 mm, Transport bag available optionally, transport handle, Trolley handle
Weight
18 kg
LD Systems ROADBUDDY 10 B5
Battery Powered Bluetooth Speaker with Mixer and Wireless Microphone
Battery-powered speaker solution
Integrated radio receiver 584 - 607 MHz
Bluetooth player with USB port and SD card slot
Class D power amplifier with 480 watts of peak power
2 combo sockets for microphone or line inputs
3.5 mm Aux input
Master section with 2-band EQ
Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
Wireless microphone and IR-remote control included
ROADBUDDY 10 B5
The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power. The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates in the 584 -607 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B5) or as an alternative a headset microphone with belt pack (LDRBUD10HSB5) and an IR-remote control for the player are included. For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel. The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 - 18000 Hz
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current , short circuit , thermal overload
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Media player
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm Jack
Mic inputs
2
Mic inputs
2 x XLR , 6.3 mm Jack
Wireless Unit
Transmission frequency range
584 - 607 MHz
Modulation Type
FM
Channels
16
Frequency Response Wireless Unit
50 - 17000lx @ 1m Hz
Controllers Wireless Unit
ASC , Mute Level (Squelch) , Power / Volume , Value Down , Value Up
Indicators Wireless Unit
AF (LED) , LED Display , RF (LED)
Connections Wireless Unit
nTNC for receiver antenna
RF Transmitter Power Output
10 mW
Handheld Microphone Weight
0.285 kg
Handheld Microphone Material
aluminium
Operating voltage
Switching Power Supply
Operating voltage
220 V - 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
polypropylene
Cabinet construction
vented
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz - 18 kHz
Speaker Tweeter
1" Compression Driver
Bass
8" Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 ") x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 ") Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories - Receiver Modules
Transmitters
See Accessories - Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
A professional 12" 500W Mobile Sound System featuring 2 UHF wireless microphones operating on different frequencies, remote control and integrated USB and SD slots for MP3 playing. This all in one system operates via mains or a 12V internal re-chargeable battery, powering a 12" main driver and a 1" HF driver. On the back there are 2 inputs and an echo effect for wired microphones, AUX line input, MP3 control unit, 5 controls for tonal adjustments etc. Due to this exciting system, premises and areas can be filled with an ear pleasing sound.
12" 500W active sound system
1" Titanium compression driver
BT receiver for audio streaming
Battery level indicator
Echo effect for microphones
Volume control for each UHF microphone
Integral USB, SD/MMC media player
Remote control for MP3 player
Mains or 12V battery operation
Integral trolley with telescopic handle
Rugged ABS case
Wattage: 500W
Frequency Response: 50 - 19.000 Hz
Type: Active Speaker
Speaker Type: 2-way Speaker
LF: 12" Cone
HF: 1" Voice Coil
Specifications: Playback options: Bluetooth, SD-Card, USB
Features: Battery: 12V - 12Ah, Frequency Handheld microphone 863.100 MHz, 864.500 MHz
Length: 350 mm
Width: 335 mm
Height: 570mm
Weight: 15.9 kg
LD Systems Roadman 102 HS B5 Portable PA Speaker with Headset Microphone
The LD Systems Roadman 102 HS B6 is a mobile and compact sound system
The Roadman 102 HS B5 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit and headset. A second wireless microphone unit can also be integrated as an option.
Product type
Battery-powered PA speaker
Type
Set with Handheld Transmitter
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16000lx @ 1m Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
2 x sat output 100 Hz
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Speaker output connections
6.3 mm Jack
Transmission frequency range
584 - 607 MHz
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.