MACKIE SRM215 V-CLASS Professional Active Speaker 15″

Today\'s performers demand greater performance than ever before from portable PA systems. Mackie has risen to that challenge and created the SRM215 V-Class Loudspeaker. This 2,000-watt portable PA fits easily on your front seat and loads into the venue in just one trip. Complete with a 15" LF driver and 1.4" Sym-X Horn HF driver, the SRM V-Class Loudspeaker delivers impressive SPLs with tons of headroom for full and accurate articulation. Simply put, this sleek and stylish loudspeaker was designed to be the loudest and best-sounding speaker in Mackie\'s lineup. It\'s equipped with Advanced Impulse DSP and Intelligent Bass Management that create an unbelievably expansive sweet spot. This speaker is completed by a 4-channel digital mixer with in-app control and Bluetooth streaming capabilities. Additionally, the dual-angled cabinet design allows it to be used as a high-performance floor monitor. So, however you use it, the Mackie SRM215 V-Class Powered Speaker will deliver consistent and clear sound every time.

The Mackie SRM V-Class Loudspeaker may pump out 2,000 watts of reliable Class D power, but the secret to its great sound is in the drivers. The SRM215 is loaded with a 15" woofer and a custom polymer tweeter. Both drivers have high-performance transducers and oversized magnets that transmit your audio with unmatched accuracy. For optimal efficiency, the horn-loading frequency is set below the tweeter\'s low-frequency capability. You\'ll enjoy the symmetrical, flat response at the crossover point for smooth transitions. Simply put, the Mackie SRM V-Class Loudspeaker is versatile enough to handle any application you can imagine.

• Powered: Yes
• Power Configuration: Single Amp
• Channels: 4-channel mixer
• LF Driver Size: 15" woofer
• HF Driver Size: 1.4" Sym-X Horn
• Total Power: 2000W Class D
• Bluetooth: Yes
• Wireless: Bluetooth
• Frequency Response: 40Hz-20kHz
• Maximum Peak SPL: 136 dB SPL @ 1m
• Horizontal Coverage Angle: 90°
• Vertical Coverage Angle: 60°
• Signal Processing: Advanced Impulse DSP
• Software: SRM Connect App
• Enclosure Material: Molded Plastic
• Mounting Options: Pole, Floor Wedge, Fly
• Height: 28.8"
• Width: 15.4"
• Depth: 17.6"

GENERAL

The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.

The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.

The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included.

Features

    400 Watt digital bi-amplification
    129 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    15" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 129 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 15" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Cabinet Material: Composite PP
    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 708/27.8 mm/inch
    Width: 437/17.2 mm/inch
    Depth: 389/15.3 mm/inch
    Net Weight: 26/57.32 kg/lbs

Two-way active full range with DSP. 1500W

15'' woofer, 3'' driver, 50 x 40 dispersion.

1000W + 500W class D power amplifier.

Optional: LD2.4 USB interface for remote PC connection.

CV-Spot protective cover. NOTE : SPOT 1500 can not drive the bass cabinet SPOT15B.

Features:

    DH-1K 1.5-inch Titanium Diaphragm Compression Driver
    EVS-15K 15-inch Woofer
    124 dB max. SPL
    500 W Class-D Amplifier
    Integrated DSP with FIR filter


Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046