MAGNAT MT25KGE724 Original Tweeter Supreme Spare Part

22.32 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
spare part tweeter for MAGNAT Supreme Model : MT 25 k-GE724 Art-Nr 316205 Round Diameter : 140mm Magnet Diameter : 70mm Hole to Hole distance: 94mm Terminal distance : 90mm

 

Read more

spare part tweeter for MAGNAT Supreme

Model : MT 25 k-GE724 Art-Nr 316205

Round Diameter : 140mm

Magnet Diameter : 70mm

Hole to Hole distance: 94mm

Terminal distance : 90mm

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “MAGNAT MT25KGE724 Original Tweeter Supreme Spare Part”

Your email address will not be published. Required fields are marked *

Quick Comparison

MAGNAT MT25KGE724 Original Tweeter Supreme Spare Part removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-900TN Driver 2", 110W, 108.5dB, 0.5-18kHz removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeB & C Speakers DE-1050 Driver 2", 140W, 109dB, 0.5-20kHz Titanium diaphragm removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k remove
NameMAGNAT MT25KGE724 Original Tweeter Supreme Spare Part removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-900TN Driver 2", 110W, 108.5dB, 0.5-18kHz removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeB & C Speakers DE-1050 Driver 2", 140W, 109dB, 0.5-20kHz Titanium diaphragm removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k remove
ImageMAGNAT MT25KGE724 Tweeter Supreme Spare Part
SKU316205DE-45DE-900TNDE-500DE-1050DE-16
Rating
Price 22.32 incl. GR VAT 136.15 incl. GR VAT 552.00 incl. GR VAT 191.99 incl. GR VAT 524.22 incl. GR VAT 99.20 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response
Contentspare part tweeter for MAGNAT Supreme Model : MT 25 k-GE724 Art-Nr 316205 Round Diameter : 140mm Magnet Diameter : 70mm Hole to Hole distance: 94mm Terminal distance : 90mm

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

220 W continuous program power capacity
1.4” horn throat diameter
75 mm (3 in) aluminium voice coil
Titanium diaphragm
500 – 18000 Hz response
108.5 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response

General

Product type Compression driver
Brand B&C Speakers
Reference DE500
Product code DRV5008

Informations

Nominal impedance 8 ohm
Dimensional category 4 inch
Manufacturer sensitivity 107 dB
Nominal power handling 80 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1500 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.11 mH

Datas

Flux density 1.9 T
Zmin 7.8 ohm

Dimensions

Voice coil diameter 1.7 inch
Outside diameter 102 mm
Depth 51 mm
Driver mounting system 2 points on diameter 76 mm
Driver mounting system N°2 3 points on diameter 57 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Winding material Aluminium
Diaphragm material Titanium
280 W continuous program power capacity
2” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
Weight1 kg2.00 kg2.60 kg5.00 kg3.40 kg1.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1 kg
Weight 2.00 kg
Weight 2.60 kg
Weight 5.00 kg
Weight 3.40 kg
Weight 1.70 kg