MARSHALL MS-4 Mini Amp Stack 4 Watts

 * 30-watt, 2x12" combo guitar amplifier
    * Two channels with independent volume controls — Normal and Top Boost
    * Reverb and Tremolo effects onboard (controllable via optional footswitch)
    * Master volume section with Tone Cut and Volume controls
    * True bypass effects loop for bringing in your own pedals
    * Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
    * 16-ohm output jack for running a cabinet along with the internal speakers
    * Features two 12" 8-ohm Celestion G12M Greenback speakers
    * Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
    * Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
    * Weight: 70.99 lbs.

Vox DA15 15W Guitar Amplifier

Introducing the affordable, portable DA15 Digital Amp from VOX. Don't let the small size fool you. This rugged little beast boasts some killer bells and whistles, ­ such as 11 distinctive sound styles ranging from clean to high gain, 11 great sounding, digital effects, a ???knob-based?? control panel that's really easy to use plus a whole lot more.

Specifications:

Number of Styles: 11
Number of Effects: 11 plus noise reduction
Signal Processing: 24-bit (both A/D and D/A conversion), 44.1 kHz sampling frequency
Input/Output Jacks: INPUT, FOOT SW, LINE/PHONE
Power Amp Output: Maximum 15W RMS @ 8 ohms
Speaker: 1 x 8 inch, VOX original (8 ohm)
Power Supply: Local Mains
Dimensions: 16.81?? x 8.90?? x 15.24?? (W x D x H)
Weight: 22.05 lbs
Options: VFS2 Dual Foot Switch

Product Description

The Marshall MG102CFX provides pure analog Marshall tone. Marshall MG102CFX is a Carbon Fiber outfitted 100 watt 2x12 Combo with FX! With a totally new internal design and approach, the brand new MG Series delivers essential digital features, but with vast superior and programmable analogue tone at its heart.

Innovation, Functionality, Tone - just a few words that help sum up the brand new range of solid-state MG amplifiers from Marshall. Combining years of experience in analogue amplification with cutting-edge digital technology has resulted in the creation of an all-encompassing amplifier series, ideal for the beginner and gigging pro alike.

Specially voiced digital effects, intuitive footswitching technology and four adjustable and storable channels are just a few of the features found in the new MG range. From a punchy 10 watt combo through to an effects laden, soul pounding 100 watt head, this series has it all.

Features

- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 2x12 in. Speakers
- 100 watts

AC30HW2 hand-wired combo amp; two Celestion G12M Greenback speakers

The VOX Hand-Wired Series - turret board construction and hand-wiring make this the ultimate amp, with rich versatile voicing and a classic powerful sound.

Key Features and Product Highlights

• Hand-wired turret board construction

• Birch-ply cabinets featuring solid bracing and a natural high frequency diffuser

• All-tube design

• ECC83/12AX7 preamp tubes (x3)

• EL84 power tube quartet

• GZ34 rectifier

• Fitted with matched Ruby Tubes that provide extended dynamic range

• Traditional VOX two-channel design.

• Top Boost and Normal. High and Low inputs for each channel

• The Normal channel provides an additional BRIGHT switch.

• The top boost channel provides a HOT/COOL switch to achieve even more gain

• Master Volume/BYPASS switch completely bypasses the Master Volume section

• OP mode switch cut the amp's Output Power level in half

• Vintage fawn-colored vinyl, reminiscent of the 1960 classic AC30

• Choose either Celestion Alnico Blue or Celestion G12M Greenback

• VFS1 footswitch controlls the Top Boost channel's HOT/COOL switch

• A premium, custom-fit dust cover is included with every model

Output Power: 30 Watts RMS into 8/16 Ohms
Tube Complement: Preamp: ECC83/12AX7 (x3), Power amp: EL84 (x4), Rectifier: GZ34
Speakers: 12" Celestion G12M Green Back (x2); 8 Ohm
Inputs:

NORMAL Channel Jacks: HIGH (x1); LOW (x1)
TOP BOOST Channel Jacks: HIGH (x1); LOW (x1)
FOOT SWITCH Jack

Outputs: POWER OUTPUT Jacks (x2 for external/extension speakers)
Dimensions (W x D x H): 705 x 260 x 550 mm / 27.76 x 10.24 x 21.65 inches
Weight: 30.8 kg / 67.9 lbs.
Included items: Power cable, VFS1 footswitch, Dust cover

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:

100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England