MASTER AUDIO CM238 Condenser Microphone Gun Cardioid

Original price was: €50.00.Current price is: €42.15. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
MASTER AUDIO – CM238 Pen-type microphone Directivity: condenser – ultra cardioid Frequency response.: 100Hz – 16Khz Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance Power supply: 1.5V / phanthom 48V Dimensions: Ø 23 x 360 mm. […]

 

Read more

MASTER AUDIO – CM238

Pen-type microphone

  • Directivity: condenser – ultra cardioid
  • Frequency response.: 100Hz – 16Khz
  • Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance
  • Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance
  • Power supply: 1.5V / phanthom 48V
  • Dimensions: Ø 23 x 360 mm.
  • Windscreen, microphone holder and cable (4,5 m.) included
Weight 0.15 kg

Reviews

There are no reviews yet.

Be the first to review “MASTER AUDIO CM238 Condenser Microphone Gun Cardioid”

Your email address will not be published. Required fields are marked *

Quick Comparison

MASTER AUDIO CM238 Condenser Microphone Gun Cardioid removeSENNHEISER E-865S Condenser Microphone with ON/OFF Switch removeAKG C 451B - Condenser cardioid microphone removeShure VP-88 - M-S Stereo Microphone with Internal Matrix, Batter removeAKG C 430 - Cardioid Condenser Microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments remove
NameMASTER AUDIO CM238 Condenser Microphone Gun Cardioid removeSENNHEISER E-865S Condenser Microphone with ON/OFF Switch removeAKG C 451B - Condenser cardioid microphone removeShure VP-88 - M-S Stereo Microphone with Internal Matrix, Batter removeAKG C 430 - Cardioid Condenser Microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments remove
ImageCM238-master audio microphone condenser artsoundAKG C 430 condenser microphone
SKUCM238H10SE00072C 451BVP88C 430C 411PP
Rating
Price Original price was: €50.00.Current price is: €42.15. incl. GR VAT Original price was: €272.00.Current price is: €239.00. incl. GR VAT Original price was: €427.81.Current price is: €347.22. incl. GR VAT Original price was: €1,554.00.Current price is: €1,491.83. incl. GR VAT Original price was: €186.00.Current price is: €156.00. incl. GR VAT Original price was: €185.00.Current price is: €164.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentMASTER AUDIO – CM238 Pen-type microphone
  • Directivity: condenser – ultra cardioid
  • Frequency response.: 100Hz – 16Khz
  • Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance
  • Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance
  • Power supply: 1.5V / phanthom 48V
  • Dimensions: Ø 23 x 360 mm.
  • Windscreen, microphone holder and cable (4,5 m.) included

The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.

  • Pick-up pattern : super cardioid
  • Sensitivity in free field, no load : (1kHz) 3 mV/Pa
  • Max. Sound pressure level (aktiv) : 150 dB
  • Nominal impedance : 200 Ohm
  • Min. terminating impedance : 1000 Ohm
  • Dimensions : d 47 x 193 mm
  • Weight : w/o cable 311 g
  • Frequency response (microphone) : 40.....20000 Hz
  • Phantom powering : 12 - 48 V
This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapter

 

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

  • Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
  • Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
  • Mono compatibility ideal for broadcast applications
  • 40 to 20,000 Hz frequency response
  • Low noise and distortion
  • Wide dynamic range
  • Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
  • Operates on phantom power or a 6V camera battery
  • LED power indicator
  • Internal shock mount for reduced stand vibration and handling noise
  • Built-in "pop" screen
  • Includes windscreen, swivel adapter, and Y-cable
Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power. Specifications Polar Pattern: cardioid Frequency Response: 20?20.000 Hz Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa Max. SPL for 1% / 3% THD: 126/130 dB SPL Equivalent Noise Level: 33 dB to DIN 45 412 Electrical Impedance: 200 ohms Recommended Load Impedance: >2.000 ohms Power Requirement: 9 to 52 volts universal phantom power Current Consumption: approx. 2 mA Connector : 3-pin XLR Cable Length: 1.5 m (5 ft.) Finish: matte black Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.) Net / Shipping Weight: 23/192 g (0.8/6,8 oz.) Optional Accessorires: B15, B18  Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound. C 411 PP: For hardwire applications, with standard XLR connector for phantom powering.
Weight0.15 kg0.31 kg0.76 kg0.60 kg0.19 kg0.15 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.15 kg
Weight 0.31 kg
Weight 0.76 kg
Weight 0.60 kg
Weight 0.19 kg
Weight 0.15 kg