| Content |
- Original MASTER AUDIO Speaker Diaphragm
- Voice coil: 1.35″ (34mm)
- Overall Diameter: 3.15″ (80mm)
- Mounting Holes : 2.87″ (72.9mm) Center to Center
- Impedance: 8 ohm, DCR: 6.0 ohm
- Titanium dome with edge wound voice coil on Kapton former
- Also Fits Driver and Cabinet Models:
AKIYAMA : PB12, PB12A, PB10, PB10A Cerwin Vega: CD-34A, CD34A, CD 34A, CT-345A, CT345A, CT 345A, Intense, Intense 152, Intense 252, INT-152, INT152, INT 152, INT-252, INT252, INT 252, DIAP00001, COMP00004, Cerwin Vega: CD-34A, CD34A, CD 34A, CT-345A, CT345A, CT 345A, Intense, Intense 152, Intense 252, INT-152, INT152, INT 152, INT-252, INT252, INT 252, DIAP00001, COMP00004, Eminence: PSD1001 / PSD1001B , SEER: PS8, PS10, DB TECHNOLOGIES: CROMO 12+, CROMO 15+, FLEXSYS FM12, OPERA 512DX, OPERA 515 DX, OPERA 710DX, OPERA 712 B LINE, OPERA 712 DX, OPERA 715 B LINE, OPERA 715 DX, OPERA 410D, CROMO 12, CROMO 15, BASIC 400, OPERA 10, OPERA 12, OPERA 15, OPERA 710BL. Monacor : PAB-125/VC, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm. |
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
| |
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Reviews
There are no reviews yet.