Content |
MASS 10
Frequency Response 80Hz – 30kHz
Sensitivity 84dB
System Configuration 2- way Driver complement 1 x 4" C-CAM Bass/Mid-range Driver
1 x 25mm C-CAM® tweeter
with vented loading system
Nominal Impedance 8 ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier 100 watts
crossover set to 100hz (RMS)
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Requirements
Recommended High Pass 80-120Hz
Crossover Frequency
Bass Alignment Reflex Rear Ported
Overall Dimensions
(H x W x D) 224 x 128 x 128 mm 813/16 x 51/16 x 51/16 Inches Weight 1.65kg (3lb, 10oz)
|
The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity 1 x 6.5” RDT® Bass/mid-range driver 1 x C-CAM® high frequency ribbon transducer Ported. HiVe® II technology All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 42 Hz - 100 KHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 50 - 120 W Bass Alignment: Ported HiVe II Technology Mid / H.F Crossover Frequency: 2800 Hz Bass Low Pass Crossover Frequency: N/A Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 370 x 225 x 285 mm (14 9/16 x 8 7/8 x 11 1/4 inch) Stand External Dimensions - (H x W x D): 615 x 340 x 365 mm (24 3/16 x 13 3/8 x 14 3/8 inch) Weight (each) Excluding stands: 13 Kg (28.6lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red |
Driver Complements Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Areated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Enhanced Ring Radiator Dynamic Balance tweeter Electrical Overall Frequency Response 36Hz-40kHz Lower -3dB Limit 50Hz dB Upper -3dB Limit 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-200 w/channel Efficiency 88 dB Crossover Orth Crossover Crossover (mid-high array) 2800HZ Inputs Dual Gold-Plated Binding Posts Dimensions Cabinet Size 16 3/4" H x 8" W x 14 9/16" D (42.55cm H x 20.32cm W x 36.99cm D) Mounting Options speaker stands or shelf mount Enclosure Type Sealed Enclosure Type (subwoofer) PowerPort bass venting Shipping/Other Product Weight 29.60 lbs. (13.43kgs) Shipping unit: each Total Shipping Weight 32.50 lbs. (14.74kgs) Speaker Warranty 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 95Hz-24kHz
Lower -3dB Limit 125 Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 89 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ
|
At home on a stand, wall or bookshelf, the versatile 685 S2 is ideal for stereo and home theatre uses in most rooms. And performance is enhanced with the addition of a Decoupled Double Dome tweeter.
The Decoupled Double Dome tweeter found in the 685 S2, and the rest of the new 600 Series, is technology taken straight from our award-winning CM10 speaker. A dual-layer design combines a thin aluminium dome for lightness and a thicker aluminium ring for rigidity - the result is absolutely stunning, with far greater clarity in the audible spectrum.
The tweeter is also decoupled from the main cabinet, kept physically separate in its own cavity with a ring of gel cushioning it from vibrations. This improves imaging and dispersion for a more natural, spacious treble.
As well as a decoupled, double dome aluminium tweeter, the two-way 685 S2 features a full-range 6.5-inch driver constructed from woven Kevlar and using Anti-Resonance Plug dustcaps, as seen in high-end Bowers & Wilkins speakers. The result is stunning audio quality from a highly versatile smaller speaker.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone bass/midrange
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
1x ø165mm (6.5 in) woven Kevlar® cone bass /
midrange | Frequency range | -6dB at 45Hz and 50kHz | Frequency response | 52Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | 87dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Reviews
There are no reviews yet.