Monitor Audio RX8 Floor Loudspeaker 175W 6 Ohms -PAIR- (HI-GLOSS)

System Format: 3 Way
Frequency Response: 32Hz - 35kHz
Sensitivity (1W@1M): 90dB
Nominal Impedance: 4 Ohms
Maximum SPL (dBA): 116.2
Power Handling (RMS): 175W
Recommended Amplifier Requirements (RMS): 50 - 175W
Bass Alignment: Bass reflex.
Twin HiVe®II port System
Tweeter Crossover Frequency: LF/MF: 300Hz
MF/HF: 2.2 kHz
Drive Unit Complement: 2 x 6" RST® Bass drivers.
1 x 6" RST® Bass/Mid driver.
1 x 1" (25mm) C-CAM® gold dome tweeter
Product External Dimensions:
(H x W x D)
inc. plinth & feet 960 x 275 x 388 mm
(37 13/16 x 10 13/16 x 15 1/4 inch)
Individual Weight: 21.76 Kg (47.88 lb)

User's Manual

Expanding on the radical design found in the award winning Aero speakers, Aeromax 6 has been tuned to the max to become even better sounding than its predecessor. Available in beautiful, modern, gloss black and white lacquer finishes and with a more coherent and immersive sound, Aeromax 6 is innovative, stylish and ideal for those who want the best stereo performance.

By replacing the traditional tweeter with a BMR (Balanced Mode Radiator) driver, the Aeromax 6 offers a radical improvement in audio quality compared to its rivals. Using the BMR shifts the crossover point between tweeter and woofer away from the usual 3kHz, right at the middle of the human ear\'s most sensitive hearing range, to a less problematic 250Hz. The result is a more natural, immersive and coherent sound. The 4th generation BMR® driver construction also delivers a more room-filling sound by using horizontal vibration modes for a much wider sound. This makes them ideal for modern homes and room layouts where speakers might not end up placed optimally for traditional stereo. You can place the Aeromax 6 where you want and still get great stereo and surround effects.

As well as offering a more coherent sound at the top end, the unique BMR® technology offers advantages at the bottom end too. Aeromax cone drivers and subwoofers are specifically designed to complement the BMR™ drivers - producing cinematic, immersive sound with sumptuous and accurate bass. And with two mid base drivers incorporated into the Aeromax 6 the bass is ground shaking.

Aeromax 2 and Aeromax 6 both feature a brand new, 4th generation BMR® driver with exceptional high frequency extension to deliver a crisp and detailed top end

Aeromax uses ultra high grade crossover components to bring superb levels of detail and transparency

Extensively braced cabinets lock the drive units mechanically to the cabinet structure resulting in lower colouration and cleaner dynamics. This is especially important with Aeromax as the drivers are actually high power subwoofers, so the more rigid the cabinet, the better

Aeromax 2 and 6 feature brand new, audiophile grade, gold plated speaker terminal posts for the ultimate performance

Oxygen Free Copper (OFC) internal cabling for the purest signal path from the audiophile grade, gold plated terminal posts to the crossover and drive units

30Hz - 22kHz

25-120 Watts

1 x BMR 46mm (2“), 2 x 165mm (6.5“) high power subwoofer

Black Gloss or White Gloss

240 x 980 x 344mm (9.4 x 38.6 x 13.5“)

17kg (37.4lbs)

Recommended Usage     Front Speakers
Type     3-Way Bass Reflex Design
Woofers     Dual 8" PMD Cone
MidRange Driver     5" Cone With Waveguide Horn
Tweeters     1" Aluminum Dome With Waveguide Horn
Magnetic Shielding     Yes
Twin Bass Reflex Ports     Single Port
Gold-Plated Brass Extruded Terminals     Bi-Wiring Terminals
Frequency Response     30 Hz - 35 kHz
Sensitivity     89 dB/2.83 V/1 m
Input Power (Maximum / Nominal)     250W / 100W
Impedance     6 Ohms
Product Dimensions (W x H x D)     10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each)     53.7

Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)

System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)