Content |
- 16 auto-scanable UHF channels and numeric LED display
- High/Low power output selectable
- Modularized design allows easy installation, operation & trouble-free maintenance
- Fits MA-708 & MA-808 wireless portable PA systems
- Ideal for parade routes, farmers markets, outdoor athletic event or religious services or any where you need to add more systems wirelessly without the mess of bulky speaker cables
Frequency Range
|
480~934MHz
|
Oscillation Mode
|
PLL Synthesized
|
Bandwidth
|
24MHz
|
RF Output Power
|
10mW / 100mW(switchable)
|
Spurious Emissions
|
|
|
Shure SLX2-BETA87C-R5 Wireless Microphone
Features:
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and
interference
Audio Frequency Response (+/? 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
?18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied
to tip of WA302 phone plug) produces positive voltage on pin 2 (with
respect to pin 3 of low impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Receiver
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): ?13 dBV
1/4 inch connector (into 3000 Ω load): ?2 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
?105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12?18 Vdc at 150 mA, supplied by external power supply
|
Artist Elite® AE3300 cardioid condenser capsule with integral shock mount Available in the following frequency bands: 541.500 - 566.375 MHz (C Band) 655.500 - 680.375 MHz (D Band) 721.500 - 746.375 MHz (G Band) 25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments Two-stage pop filter to protect against "p” pops Dual output power selection to optimize battery life Digital Tone Lock™ squelch to identify the wireless transmitter to the receiver High efficiency dual companding system for flawless audio Function menu displayed in a backlit LCD window and controlled by internal touch switchesFour nameable user presets Operates on two AA batteries Battery fuel gauge LCD readout on the body of the microphone Power/mute lock provision Dual-colour power/mute status indictor 18 dB audio input level adjustment Integral capsule 6 dB pad switch Rugged metal housing with integral antenna Supplied with a heavy-duty microphone stand clamp RF Power Output: High: 35 mW; Low: 10 mW, nominal Spurious Emissions: According to National Regulations Dynamic Range: >=110 dB, A-weighted Microphone Element: Cardioid Condenser Batteries: Two 1.5V AA alkaline (not included) Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern Dimensions: 239mm long, 50mm diameter Net Weight: 270g Accessory Included: AT8456a Quiet-Flex™ stand clamp
|
PT 4000
UHF bodypack transmitter with magnesium body
30 MHz wide UHF band with up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Operates for up to 15 hours on dry batteries, 12 hours on optional BP 4000 battery
pack and displays remaining battery life
Optional remote mute switch
The PT 4000 is a professional bodypack transmitter with a rugged die-cast magnesium
body. The 30 MHz wide UHF band provides up to 1200 selectable frequencies and
several preset frequency banks for various countries make it easy to set up a multichannel
system. A backlit display makes it very easy to tune the PT 4000 to the same frequency
as the SR 4000 receiver. A pilot tone system continuously transmits transmitter status
data including MUTE switch position and the remaining battery life to the receiver. Integrated
charging contacts let you charge the optional BP 4000 battery pack without having to
remove it from the transmitter.
An optional remote mute switch allows the user to mute the transmitter without having
to fumble for the on-board mute switch if the transmitter is hidden in the clothes.
Available microphones for PT 4000: C 411 L, C 416 L, C 417 L, C 418 L,
C 419 L, C 420 L, C 444 L, C 477 WR L, CK 55 L, CK 77 WR L,
CK 97-CVR WL
SPECIFICATIONS:
Carrier frequency range 650 to 680, 680 to 710, 720 to 750, 760 to 790,
790 to 820, 835 to 862 MHz
Modulation FM
Audio bandwidth 35 to 20,000 Hz
Selectable channels 1200
Max. channels for multichannel operation > 50
THD typ. |
Modulation
FM (45 kHz max. deviation)
Frequency Range
470–952 MHz (depending on region)
Tuning Bandwidth
Up to 80 MHz (depending on region)
Antenna
Dipole, UR3 housing and attached microphone form the antenna
Carrier Frequencies
Up to 3200, tunable in steps of 25 kHz (depending on region)
RF Power Output
Selectable 10 mW or 50 mW maximum, depending on region
Power Requirements
Two (2) 1.5V AA alkaline
Battery Life
10 Hours (alkaline) with no phantom power @ 10 mW, typical (frequency band dependent)
4 Hours (alkaline), with 48 V phantom power @ 50 mW, typical (frequency band dependent)
Gain Adjustment Range
-10 to +20 dB, MIC or LINE input setting
Pilot Tone
32 kHz
Frequency Stability
± 0.0015%
Spurious Radiation
75 dB below carrier (typical)
Equivalent Input Noise
-127.0 dBV, A-weighted (audio front end)
Maximum Audio Input level
+24 dBV (LINE input, 0 dB gain)
-21 dBV (MIC input, 0 dB gain)
Differential Input Impedance
6 kΩ LINE input setting
3 kΩ MIC input setting
System Frequency Response
35 Hz–17 kHz, (+1.5 dB, -3 dB)
Note: Overall system frequency response depends on the microphone element and receiver.
High Pass Filter
Two-pole (12 dB per octave), selectable cut off frequency from 40 Hz to 240 Hz
System THD+N
|
The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
Wavelength | 870 nm (AM: Brightness modulation) | Modulation Method | Frequency modulation | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | Tone Signal | 32.768 kHz | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | Maximum Input Sound Pressure | 120 dB SPL | Microphone Unit | Unidirectional electret condenser microphone | Frequency Response | 100 Hz - 12 kHz | Preemphasis | 300 μs | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | Dimensions | φ37 × 241.8 (H) mm (φ1.46" × 9.52“) | Weight | 170 g (0.37 lb) (with battery) | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Reviews
There are no reviews yet.