Price | €4.50 Original price was: €4.50.€4.08Current price is: €4.08. incl. GR VAT | €2.35 Original price was: €2.35.€2.12Current price is: €2.12. incl. GR VAT | €9.05 Original price was: €9.05.€8.15Current price is: €8.15. incl. GR VAT | €11.52 Original price was: €11.52.€10.38Current price is: €10.38. incl. GR VAT | €12.76 Original price was: €12.76.€11.49Current price is: €11.49. incl. GR VAT | €1.92 Original price was: €1.92.€1.73Current price is: €1.73. incl. GR VAT |
Stock | In stock (can be backordered)
| Only 1 left in stock (can be backordered)
| In stock (can be backordered)
| Only 3 left in stock (can be backordered)
| Only 1 left in stock (can be backordered)
| In stock
|
Content | NC3MXX
3 pole cable connector, male. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 2 ?m Ag silver
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use. Suitable for male chassis connectors. | NE5MX - XLR male extension 5pin
PHASE OUT
direct replacement / successor: NC5MXX
5 pole male cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
Title |
NC5MX |
Connection Type |
XLR |
Gender |
male |
Capacitance between contacts |
≤ 7 pF |
Contact resistance |
≤ 3 mΩ |
Dielectric strength |
1,5 kVdc |
Insulation resistance |
> 10 GΩ (initial) |
Rated current per contact |
7,5 A |
Rated voltage |
< 50 V |
Cable O.D. |
3.5 - 8.0 mm |
Insertion force |
≤ 20 N |
Withdrawal force |
≤ 20 N |
Lifetime |
> 1000 mating cycles |
Wiresize |
max. 1.0 mm² |
Wiresize |
max. 18 AWG |
Wiring |
Solder contacts |
Locking device |
Latch lock |
Boot |
Polyurethan |
Contact plating |
2 µm Ag |
Contacts |
Brass (CuZn39Pb3) |
Insert |
Polyamide (PA 66) |
Locking element |
Zinc diecast (ZnAl4Cu1) |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Strain relief |
Polyacetal (POM) |
Approvals |
UL |
Flammability |
UL 94 V-0 |
Standard compliance |
IEC 61076-2-103 |
Protection class |
IP 40 |
Solderability |
Complies with IEC 68-2-20 |
Temperature range |
-30 °C to +80 °C |
| XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
B-NE5-FPD - XLR chassis female 5pin D-type |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.Suitable for Speakon chassis connectors |
Reviews
There are no reviews yet.