| Stock | Only 1 left in stock (can be backordered)
| In stock (can be backordered)
| Only 1 left in stock (can be backordered)
| In stock (can be backordered)
| In stock (can be backordered)
| Only 1 left in stock (can be backordered)
|
| Content | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB | This series has become the accepted worldwide standard for XLR cable connectors.
The compact design offers the shortest XLR cable version in the industry. The female
features an insert that's completely surrounded by metal for added protection and the
shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is
quick and easy with no screws to worry about and includes the unique Neutrik chuck
type strain relief. |
The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors. | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | B-NE3-FPD - XLR chassis female 3 pin D-Type |
Male, heavy duty version with metal boot and stainless steel shell.
Electrical Specifications:
* Number of contacts: 4
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 10 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuZn39Pb3
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM |
Reviews
There are no reviews yet.