Price | €13.83 Original price was: €13.83.€12.44Current price is: €12.44. incl. GR VAT | €10.28 Original price was: €10.28.€9.75Current price is: €9.75. incl. GR VAT | €1.92 Original price was: €1.92.€1.73Current price is: €1.73. incl. GR VAT | €5.58 Original price was: €5.58.€5.01Current price is: €5.01. incl. GR VAT | €2.35 Original price was: €2.35.€2.12Current price is: €2.12. incl. GR VAT | €5.83 Original price was: €5.83.€5.25Current price is: €5.25. incl. GR VAT |
Content |
3 pole male cable connector, "heavy duty“, metal boot and stainless steel shell, gold contacts The X-HD Series is a "Heavy duty" XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard. - “Heavy duty" cable connector for outdoor use
- All metal design
- Male connector in stainless steel
- NC*MX-HD mates with NC*FX-HD cable connector
- Dust and water protected according IP 65 in mated condition
- Gold contacts
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
| B-NE5FX - XLR female extension 5pin
NC5FX |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.Suitable for Speakon chassis connectors | NC4MX
4 pole cable connector, male. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 4
Contact resistance: ? 3 m
Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 10 A
AWG: 1.5 mm²/16 AWG
Capacitance between contacts: ? 7 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: CuZn39Pb3
Contact surface: gal 2 ?m Ag
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility / Remarks
Compatibility: IEC 61076-2-103 Standard |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use. Suitable for male chassis connectors. | NC3FXX-B
3 pole cable connector, female. Black metal housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Reviews
There are no reviews yet.