| Content | The NS7II Laptop Stand is custom-built for NS7II, providing you with a solid platform to keep your computer at the optimal height and angle during performances. Its rugged steel arms are cushioned with soft rubber to cradle your laptop and avoid scratches, and the entire assembly attaches directly to NS7II in seconds via six hand-turnable screws. Itʼs a seamless fit so you can mix with confidence. |
Gravity LTS T 01 Laptop stand
No matter if you're working on stage, at home, in the studio or on location at a photo shoot, now your laptop can stay firmly fixed in place and stable at all times in your mobile performance rigs -positioned just the way you want - all thanks to the Gravity® LTST 01 laptop stand.
The large mounting plate can accommodate all standard laptop sizes ranging from 12" to 17". Your laptop is carefully and securely attached to the stand thanks to 14 slots in the top section, 2 slots in the bottom section, and the freely adjustable holding pins and clamps that come supplied with the product. The holding pins are pressed onto the laptop and then locked into place from below using the set screws.
You can also use the stand for your DJ controller, mixer or other pieces of equipment that you always need within arm's reach. The mounting plate can be tilted continuously by 180°, meaning it can be used both in vertical and horizontal applications. It can also be easily twisted off for use in the field.
Its solid aluminium tripod with a 35 mm socket has been designed for maximum mobility because it weights only 1.94 kilograms. The stand's height can be gradually adjusted from 750 mm to 1.320 mm, allowing you to adjust it perfectly to your needs - whether you're standing or sitting.
With the LTST 01 laptop stand, Gravity® offers you a flexible companion for your mobile performance rigs.
Product type
Stands and Tripods Multimedia Equipment
Width spacing between adjusting pins min.
Width spacing between adjusting pins max.
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
Width spacing between adjusting jaws max.
Height adjustment
Set screw with safety split pin
| Gravity FDJT 01
DJ Desk with Adjustable Loudspeaker and Laptop Trays
Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.
Your trusty monitors can be placed on the height-adjustable, 360° rotatable and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes.
Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right.
You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment - with a usable depth of 500 mm and a width of 1190 mm.
More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.
| Product type |
Studio & Recording Equipment Tables |
| Type |
DJ table |
| Material |
Steel |
| Surface table |
Powder-coated |
| Surface speaker tray |
EVA padded |
| Surface laptop tray |
Powder-coated |
| Color |
Black |
| Max. support depth table |
500 mm |
| Max. support depth speaker tray |
245 mm |
| Max. support depth laptop tray |
330 mm |
| Min. height table |
680 mm |
| Max. height table |
1090 mm |
| Min. height speaker tray |
263 mm |
| Max. height speaker tray |
358 mm |
| Width table |
1190 mm |
| Width speaker tray |
250 mm |
| Width laptop tray |
480 mm |
| Depth table |
560 mm |
| Depth speaker tray |
250 mm |
| Depth laptop tray |
330 mm |
| Max load table |
50 kg |
| Max. load speaker tray |
15 kg |
| Tilt angle speaker tray |
+/- 15° |
| Rotating range speaker tray |
360° |
| Weight |
25,24 kg |
| Gravity LTS T 02 W Universal Laptop Stand with Adjustable Holding Pins and Steel Base
Live performers and studio musicians are familiar with having to find a place to put their laptop, tablet or central effect unit. But also being able to move your workstation around when working at home can be helpful to ensure a quick and flexible change of scenery. The LTST 02 W laptop stand from Gravity® offers you this possibility. Whether you're a musician, technician, photographer or stay-at-home worker, the universally applicable, flexible and very stable tray means you no longer need to worry about your work equipment.
There are many ways the large, height-adjustable tray panel, which offers enough space to accommodate all common 12 "to 17" laptops, can be used. The four adjustable retaining bolts - which can be removed if required - ensure the safe and secure positioning of laptops, tablets or compact mixers on the tray. Numerous ventilation slots enable the proper ventilation of electronics. Extra flexibility is offered by the tray panel which can be adjusted to any angle. This allows the LTST 02 W to be used both vertically and horizontally, for example, to keep your notes visible at all times when giving a talk.
The LTST 02 W is an extremely stylish laptop stand with a sleek look, mainly in part due to its single leg and a flat base made out of solid steel. In contrast to conventional tripods which are rarely used off stage or outside the studio due to their close resemblance to microphone and loudspeaker stands, the LST 02 W also cuts a fine figure at events, conferences or in offices. The height of the LTST 02 W can be flexibly adjusted between 79 cm and 129 cm, meaning it can also be used while sitting down.
With the LTST 02 W, Gravity® offers you a universal laptop stand that's bound to win you over as a flexible portable tool for setting up mobile performance rigs in a variety of situations.
| Product type |
Stands and Tripods Multimedia Equipment |
| Type |
Laptop Stand |
| Support material |
Steel |
| Tube material |
Steel |
| Tubing surface |
Powder-coated |
| Color |
White |
| Width adjusting jaws |
40 mm |
| Width spacing between adjusting pins min. |
120 mm |
| Width spacing between adjusting pins max. |
425 mm |
| Height spacing between adjusting pins to adjusting jaws min. |
117 mm |
| Height spacing between adjusting pins to adjusting jaws max |
250 mm |
| Width spacing between adjusting jaws min. |
130 mm |
| Width spacing between adjusting jaws max. |
360 mm |
| Support width |
480 mm |
| Tray height |
330 mm |
| Min. height |
790 mm |
| Max. height |
1200 mm |
| Transport length |
790 mm |
| Height adjustment |
Set screw with safety split pin |
| Dimensions Base (W x H x D) |
565 x 20 x 330 mm |
| Base material |
Steel |
| Base weight |
8.2 kg |
| Max. load capacity |
15 kg |
| Interchangeable rings |
1 x 25 mm, 2 x 30 mm, 4 x 15 mm |
| Black ring pack included |
Yes |
| Weight |
11,76 kg |
| Trolley support furniture for Notebook / Projector White
It is ideal for conference centres, hotels, meeting rooms, classrooms and showrooms.
Technical Features
- Adjustable height
- Easy access to assembly and disassembly
- Four 2" wheels for maximum stability (2 locks)
- Platform tilt for improved projection flexibility
- Support for maximum weight: 10 kg
- Material: wood and steel
- Painting: powder
- Color: White
Furniture dimensions
- Width: 573 mm
- Depth: 538 mm
- Height: min 850 mm - max 1100 mm
- Weight: 10 kg
Packaging dimensions
- Width: 705 mm
- Depth: 515 mm
- Height:
Package contents 120 mm
- Trolley universal ICA-TB TPM-6 |
- Folding laptop stands for all formats from 12\" to 17\"
- Also suitable for controllers such as Launchpad, Machine or Push 2
- Extremely robust, lightweight aluminium construction
- Rapid set-up, with adjustable shelf and base angle
- Patented mechanism and design
- Non-slip rubber pads
- Compact transportation size
- With table clamp and practical clipboard
With its revolutionary patented design, this laptop stand is extremely robust, lightweight and easy to transport. With its revolutionary patented design, this laptop stand is extremely robust, lightweight and easy to transport. It is suitable for all formats from 12\" to 17\" as well as for controllers such as Launchpad, Machine or Push 2. It can be folded to a compact size in seconds. Securely locking eccentric clamps facilitate rapid tilt adjustment and locking of the non-slip rubber-coated shelf and base to provide optimal ergonomic use. The laptop stand is equipped with a table clamp and a clipboard, which are elegantly mounted on the middle rack.
Product type
Stands and Tripods
Type
Laptop Stand
Material
aluminium
Surface
powder coated
Colour
Black
Depth
280 mm
Width
260 mm
Height
270 mm
Max. board thickness for table mounting bracket
55 mm with base , 60 mm without base
Maximum load
8 kg
Weight
1,6 kg |
Reviews
There are no reviews yet.