Content | Professional high torque direct drive turntable
- Full-size platter with high-torque direct-drive motor
- 2-speed design: 33 1/3 and 45 RPM
- S-shaped tonearm for accurate tracking
- Tonearm with height adjustment, damped cueing and anti-skate control
- Pitch range adjustable to ±8%, ±16%, and ±50%
- Adjustable counterweight for perfect tonearm balance
- Pitch fader with reset button
- Start and stop time knobs for adjustable time ramping
- 45 RPM adapter included
Turntable platter: die-cast aluminum
Drive Method: Quartz Servo Direct Drive
Motor: 3-phase brushless DC motor
Starting Torque: 4 kgf-cm
Pitch Range: +/- 8%, 16%, 50%
Speed: 33 1/3 RPM, 45 RPM
Wow and flutter: | Whether you’re just getting into records, rediscovering a record collection long since buried away or simply adding a turntable to complete your system, the AT-LP60X fully automatic belt-drive turntable is an excellent choice. This affordable, easy-to-use turntable plays both 33-1/3 and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not.
An update of the popular AT-LP60, the ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60X’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.
The turntable comes with a detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and a removable hinged dust cover. It is available in black (AT-LP60X-BK), brown/black (AT-LP60X-BW), gunmetal/black (AT-LP60X-GM), and red/black (AT-LP60X-RD).
-
- Experience the high-fidelity audio of vinyl
-
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
-
- Anti-resonance, die-cast aluminum platter
-
- Redesigned tonearm base and headshell for improved tracking and reduced resonance
-
- Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
-
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
-
- Built-in switchable phono pre-amplifier for phono- or line-level output
-
- Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover
- Available in black (AT-LP60X-BK), brown/black (AT-LP60X-BW), gunmetal/black (AT-LP60X-GM), and red/black (AT-LP60X-RD)
AC adapter: 12 V, 2 A
Replacement Stylus: ATN3600L
Type |
Belt drive turntable, fully automatic |
Motor |
DC servo-controlled |
Speeds |
33-1/3 RPM, 45 RPM |
Turntable Platter |
Aluminum |
Wow and Flutter |
Less than 0.25% (WTD) @ 3 kHz |
Signal-to-Noise Ratio |
>50 dB (DIN-B) |
Output Level |
Pre-amp "PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
Power Supply Requirements |
100 to 240 V, 50/60 Hz, 0.6 A Max. |
Power Consumption |
1.0 W |
Dimensions |
359.5 mm (14.15“) W x 97.5 mm (3.84“) H x 373.3 mm (14.70“) D |
Weight |
2.6 kg (5.73 lbs) |
Accessories Included |
Dust cover, Felt mat, Platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9\')), AC adapter (approx. 1.5 m (4.9\')) |
|
"The Beatles Singles Collection" - Artist Collection Turntable
To celebrate the release of “The Beatles Singles Collection” box set of vinyl singles, we are releasing a very special addition to our Artist Collection turntables: Simply referred to as the “Singles Turntable”, the deck itself will be a collage of all original Beatles single sleeve, and it will include several features unique to this edition.
Based on our award winning Debut III model it features the following elements and upgrades:
- Electronic speed change (33/45/78)
- 8,6” Aluminium S-shaped tonearm with 2 SME Headshells each with its own pre-calibrated cartridge: easily change headshells to switch between mono and stereo record playback
- The two included cartridges are: a new Pro-Ject designed, Ortofon manufactured Pick it Mono for mono record playback and an Ortofon 2M Red for stereo record playback
- Heavy acrylic platter
Features
- 8,6” S-shape aluminium tonearm with 2 included SME Headshells + preadjusted cartridges
- Ortofon 2M Red and Pro-Ject designed, Ortofon manufactured Pick it Mono included
- Electronic speed switch for 33/45 & 78rpm
- Heavy non resonant acrylic platter
- Heavy MDF plinth with handpainted high gloss finish
- DC power supply with DC/AC motor control board for accurate speed stability
- TPE motor suspension
- Handmade in the EU
- Technical Specifications
- Speed 33, 45 / 78 (electronic speed change)
- Principle Belt drive
- Platter 300 mm acrylic platter
- Main bearing Stainless steel
- Wow & flutter ±0.19%
- Speed variance ±0,60%
- Signal to Noise 68 dB
- Tonearm 8,6” S-shape, aluminium, SME headshell connector
- Effective arm length 218,5 mm
- Effective tonearmmass 6,0 g
- Overhang 18,5 mm
- Tracking force range 10 - 30 mN
- Included accessory 15 volts DC / 800 mA power supply, dust cover, Connect it E phono cable, feltmat
- Standby power consumption < 1 watt standby
- Dimensions 415 x 118 x 320 mm (WxHxD) lid closed
- Weight 5,6 kg net
|
Speed |
33, 45 (manual speed change) |
Principle |
Belt drive |
Speed variance |
33: 0.60% 45: 0.50% |
Wow & Flutter |
33: 0.19% 45: 0.17% |
Platter |
300 mm glas with felt mat |
Main bearing |
Brass with teflon plate |
Tonearm |
8.6” aluminium |
Effective arm length |
218.5 mm |
Output voltage at 1000 Hz, 5cm/sec |
5 mV |
Frequency response |
20-20.000 Hz ± 1.5 dB |
Stylus type |
Spherical |
Internal inductance |
450 mH |
Recommended load restistance |
47 kOhm |
Recommended load capacitance |
200-500 pF |
Catridge weight |
19g |
Overhang |
18.5 mm |
Effective tonearm mass |
6.0 g |
Counterweight for mass |
2 - 5.0 g |
Tracking force, recommended |
1,75g (17,5mN) |
Power consumption |
4.5 Watt max |
Dimensions |
500 x 120 x 400 mm (WxHxD) |
Weight |
4.5 kg net |
|
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.
While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.
Built-in adjustable Scratch Slide Switch
User-replaceable scratch slide-switch keeps the action going
Protective dust cover and integrated carrying handle
Wall-powered with included AC adapter or six batteries(not included)
Built-in speaker
Cartridge included
Removable slip-mat
Class-compliant USB connection for PC recording
33 1/3, 45 and 78 RPM settings
RCA line and headphone outputs
1/8" Aux input with adjustable volume
| When you rock vinyl on this deck – Nothing Else Matters.
Pro-Ject’s design team treated the surface of the new turntable with a mirror-finished metal logo contour to give the player its distinctive look, a bold aesthetic that resonates with the iconic rock band. The S-shaped tonearm comes with a pre-installed Pick it S2 C integrated cartridge & headshell but allows for easy cartridge swapping via the detachable assembly. Tracking force, anti-skating and VTA are fully adjustable for fine-tuning and position the Metallica Limited Edition Turntable as a true audiophile investment.
Features
- 8.6” S-shaped aluminum tonearm
- Fully adjustable VTA, tracking force & anti-skating
- Massive MDF plinth in unique Metallica design
- Mirror-finished metal top plate
- Heavy glass platter
- Aluminum sub-platter
- Metal drive-pulley
- Height-adjustable aluminum feet, TPE damped
- Precision belt-drive with electronic speed control
- Premium semi-symmetrical phono cable with integrated grounding wire
- Gold plated RCA connectors
- Handmade in Europe
Technical Specifications
- Speed: 33, 45/(78) (electronic speed change)
- Drive principle: belt drive with electronic speed control
- Platter: heavy glass platter
- Platter bearing: high precision stainless steel axle in bronze bushing
- Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
- Speed drift: 33: +/-0,40%; 45: +/-0,30%
- Signal to noise: 68dB
- Tonearm: 8,6” S-shape aluminium; SME headshell
- Effective arm length/mass: 218,5 mm / 7,5 g
- Overhang: 18,5mm
- Included accessories: 15V DC / 0,8A power supply, 78 RPM round belt, 7‘‘ single adapter, feltmat
- Power consumption: 4W / 0W standby
- Dimensions: 430 x 120 x 430mm (WxHxD)
- Weight: 4,5 kg net
|
Reviews
There are no reviews yet.