ONKYO TX-8220-S Stereo AMP 100W / Channel, 6Ohm, Phono Input, BLUETOOTH, Silver

Add Dynamic Hi-Fi Sound to Your Entertainment Mix

Delivering 110 W/Ch of high-current power from a fully discrete low-impedance amplification system, the TX-8130 plays your audio sources with dynamic energy and pure musicality. Custom-spec components are used throughout, from high-current EI transformer, twin 8,200 μF capacitors, and rigid oval chassis to the 384 kHz/32-bit DAC that decodes Hi-Res 192/24 and 5.6 MHz DSD files streamed over the network.

Whether enjoying Spotify, Deezer, or TuneIn Radio (with song selection handled via remote app) or kicking back with a stack of LPs, listeners are rewarded with lush, detailed, and deeply satisfying sound that few amps at this price can equal. Other details such as BGM presets for one-touch playback of AM/FM/Internet Radio stations, generous analog/digital connectivity, and rock-solid build will confirm your impression of quality, value, and versatility.

HIGHLIGHTS

• 100 W/Ch Hi-Current Amplification System
• Bluetooth® Audio Streaming Technology for Almost Any Device
• DAB+ and FM/RDS Radio Tuners with 40 Station Presets
• MM Phono, Analog, and Digital Audio Inputs
• Hi-Current Discrete Amplification System

ADVANCED FEATURES

• 100 W/Ch Stereo Power (6 Ω, 1 kHz, 10%, 1 Channel Driven, IEC)
• Stream from Mobiles, Smartphones, Tablets, Laptops, and PC via Bluetooth Version 4.1 (A2DP/AVRCP)
• with Bluetooth Standby and Auto Connect Functions
• DAB+ and FM/RDS Radio Tuners with 40-Station Memory Presets
• Radio Station Preset Naming (Up to 8 Characters)
• WRAT (Wide Range Amplifier Technology) with Massive Hi-Current EI Transformer,
• Custom Power Capacitors, and Low Impedance Drive
• Non-Phase-Shift Amp Circuitry with Discrete Power Transistors
• Optimum Gain Volume Circuitry
• 192 kHz/24-bit* (PCM1754) Digital-to-Analog Converter
• Direct Mode for Source-Authentic Audio Reproduction

* 96 kHz/24-bit D/A conversion

CONNECTION FEATURES

• 2 Digital Audio Inputs (1 Optical and 1 Coaxial)
• 4 Analog RCA Inputs and 1 Line Output
• Phono Input with MM Equalizer
• Subwoofer Pre-Out
• Two Pairs of Speaker Posts with Screw Knobs
• 6.35 mm Headphone Jack

           Dimensions (W x H x D) 435 x 149 x 328 mm

           Weight 7.0 kg

           CARTON Dimensions (W x H x D) 533 x 234 x 401 mm

           Weight 8.8 kg

Power Output One Channel Driven :275 watts
Dimensions (Without Brackets, Including Feet) :17-1/16" W x 9-5/8" D x 3-11/16" H (43.34 cm W x 24.45 cm D x 9.37 cm H)
Weight | Metric :28 lbs | 12.70 kg
Dimensions (With Brackets, Feet Removed) :19-1/16" W x 9-5/8" D x 3-7/16" H (41.42 cm W x 24.45 cm D x 8.73 cm H)
Finish :Available in both silver and black
Power Output Two Channels Driven :230 watts each

Toroidal Transformer

We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.

The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can re-bias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA60 is always running at optimum performance.

If you want to use a subwoofer as part of your speaker complement, the CXA60 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3kHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Thereʼs some revolutionary signal management happening beneath the lid of the CXA60. For the first time, our engineers decided to go fully balanced rather than single-ended all the way through. As a consequence, any noise that that might be picked up in the audio signal while routing through the amplifier is cancelled before itʼs output.

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet. Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA60 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well.

Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences. This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier. We can hear very clearly what each of those components is doing.

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

If you want to use your CXA60 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100 is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA60 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA60 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA60 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.

• Power output:60W RMS into 8 Ohms, 90W RMS into 4 Ohms
• DAC:Wolfson WM8740
• Frequency Response:

• Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
• Pure Direct Mode for greater sound purity
• Simple and sophisticated design
• Phono MM terminal for vinyl playback
• Screw-type speaker terminals
• Speaker selector and speaker terminals for two systems
• Simple design remote control
• Head phone terminal

First Impressions

If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor.  The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.