| Content | For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing
Features:
- Output Voltage at 1000Hz, 5cm/sec. : 7mV
- Channel Balance at 1 Khz : 1,5dB
- Channel Seperation at 1 Khz : 25dB
- Channel Seperation at 15 Khz : 15dB
- Frequency Range at 3db : 20-20.000Hz
- Stylus Type : Spherical
- Internal Impedance : 750 Ohm
- Tracking Force recommended : 4,0G(40mN)
- Cardridge Weight : 18,5 gram
- Replacement Stylus Unit : Scratch
|
|
NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Type: MC-type
Playback frequency range: 20-20,000Hz
Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
Horizontal/vertical output ratio: 30dB (1kHz)
Output balance: 1.0dB (1kHz)
Stylus pressure: 2.3-2.7g (2.5g standard)
Coil impedance: 10O1kHz
DC resistance: 10O
Load resistance: More than 100O(when head amp connected)
Coil impedance: 28µH (1kHz)
Static compliance: 20×10-6cm/dyne
Dynamic compliance: 6×10-6cm/dyne (100Hz)
Needle shape: Round needle (0.65mil)
Cantilever: Duralumin pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
| A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
| The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
| Output voltage at 1000Hz, 5cm/sec. |
8 mV |
| Channel balance at 1kHz |
1,5 dB |
| Channel separation at 1kHz |
22 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at -3dB |
20-20.000 Hz |
| Frequency response |
20-18.000 Hz -3dB/-2 dB |
| Tracking ability at 315 Hz at recommmende tracking force |
90 μm |
| Compliance, dynamic lateral |
12 μm/m N |
| Stylus type |
Spherical |
| Stylus tip radius |
-- |
| Tracking force range |
2,0-4,0 g (20-40 mN) |
| Tracking force recommended |
3,0 g (30 mN) |
| Tracking angle |
- |
| Internal impedance, DC resistance |
- |
| Internal inductance |
- |
| Recommended load resistance |
- |
| Recommended load capacitance |
- |
| Cartridge weight |
18,5 g |
| Replacement stylus unit |
Digitrak |
|
Type: Moving coil (MC)
Frequency response: 15 to 50,000 Hz
Output voltage: 0.4mV (1 kHz, 5 cm/sec.)
Channel separation: 30 dB (1 kHz)
Channel balance: 0.5 dB (1 kHz)
Tracking force: 1.8 to 2.2 g (standard: 2.0 g)
Coil impedance: 12O(1kHz)
DC resistance: 12 O
Recommended load impedance: Min. 100 O (when head amplifier is connected)
Coil inductance: 25µH (1 kHz)
Static compliance: 35 x 10 - 6 cm/dyne
Dynamic compliance: 18 x 10 - 6 cm/dyne (100 Hz)
Stylus: Line contact stylus (curvature radius: 40 x 7µm)
Cantilever: 0.26 mm diameter solid boron
Vertical tracking angle: 23 degrees
Dimensions: 17.3(H) x 16.8(W) x 25.7(L) mm
Weight: 8.0 g
|
Reviews
There are no reviews yet.