PALMER PEPFLA MI POCKET FLANGER – Flanger effect for guitar

Original price was: €71.20.Current price is: €45.00. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: PEPFLA Category:
If you are looking for a gently whooshing modulation with a transparent metallic edge or extreme and highly impressive jet effects, you will find them in the Palmer Pocket Flanger’s range of sounds. Rate, Depth and Mix controls provide extensive adjustment for both classic and contemporary flanging. The Pocket Flanger works on a 9V battery […]

 

Read more

If you are looking for a gently whooshing modulation with a transparent metallic edge or extreme and highly impressive jet effects, you will find them in the Palmer Pocket Flanger’s range of sounds. Rate, Depth and Mix controls provide extensive adjustment for both classic and contemporary flanging.

The Pocket Flanger works on a 9V battery or optional power adapter, e.g. Palmer PW9V.

  • Type: guitar effects
  • Number of Inputs: 1
  • Input Connections: 6.3 mm jack
  • Input Impedance: 1 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 100 k ohms
  • Intrinsic Noise: -85 dB
  • Controls: Rate, Depth, Mix
  • Indicators: On/Off
  • Power Supply: power supply 9 V DC, 9 V battery
  • Power Consumption: 20 mA
  • Housing Material: sheet steel
  • Housing Surface: powder-coated
  • Width: 60 mm
  • Depth: 100 mm
  • Height: 55 mm
Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER PEPFLA MI POCKET FLANGER – Flanger effect for guitar”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER PEPFLA MI POCKET FLANGER - Flanger effect for guitar removeDIGITECH HM2 HarmonyMan Intelligent Pitch Shifter Guitar Effects Pedal removeMARSHALL EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay removeBOSS CE-5 CHORUS ENSEMBLE Pedal removeBEHRINGER VD-400 Vintage delay analog pedal removeBOSS BF-3 Flanger Pedal remove
NamePALMER PEPFLA MI POCKET FLANGER - Flanger effect for guitar removeDIGITECH HM2 HarmonyMan Intelligent Pitch Shifter Guitar Effects Pedal removeMARSHALL EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay removeBOSS CE-5 CHORUS ENSEMBLE Pedal removeBEHRINGER VD-400 Vintage delay analog pedal removeBOSS BF-3 Flanger Pedal remove
Image
SKUPEPFLAHM2PEDL-10035BOS.1575.0009VD400690.ROL.096
Rating
Price Original price was: €71.20.Current price is: €45.00. incl. GR VAT Original price was: €275.75.Current price is: €194.00. incl. GR VAT Original price was: €124.00.Current price is: €86.90. incl. GR VAT117.79 incl. GR VAT Original price was: €49.92.Current price is: €35.00. incl. GR VAT Original price was: €173.59.Current price is: €170.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

If you are looking for a gently whooshing modulation with a transparent metallic edge or extreme and highly impressive jet effects, you will find them in the Palmer Pocket Flanger's range of sounds. Rate, Depth and Mix controls provide extensive adjustment for both classic and contemporary flanging.

The Pocket Flanger works on a 9V battery or optional power adapter, e.g. Palmer PW9V.

  • Type: guitar effects
  • Number of Inputs: 1
  • Input Connections: 6.3 mm jack
  • Input Impedance: 1 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 100 k ohms
  • Intrinsic Noise: -85 dB
  • Controls: Rate, Depth, Mix
  • Indicators: On/Off
  • Power Supply: power supply 9 V DC, 9 V battery
  • Power Consumption: 20 mA
  • Housing Material: sheet steel
  • Housing Surface: powder-coated
  • Width: 60 mm
  • Depth: 100 mm
  • Height: 55 mm

Following up on the success and rave reviews of our newly released Vocalist® products, we decided to make a pedal with the same cool features but specifically designed for the guitarist. With our exclusive musIQ™ technology we were able to combine the lightning-fast natural sounding harmony generation made famous by the Vocalist pedals, and fuse it with the demands of professional guitarists everywhere.

HarmonyMan™ is the world's first guitar pedal that generates harmonies based on your chord progression. It features four different types of pitch shifting depending on which of the 42 different voices are selected. Combine up to two distinct voices in any combination to accompany the input signal: a 3rd or 5th above or below, an octave up, two octaves below, 24 semitones and 4 detune variations. Simply play the songs you know and love, and when the spotlight cues your solo, hit the harmony footswitch to get amazing multi-part guitar harmonies!

Features
  • Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
  • 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
  • Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
  • Edit, store and recall 4 memory presets.
  • Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
  • Built-in guitar tuner
  • Pre-harmony Distortion loop
  • Features
  • Shifting Modes
  • Configurations
  • Specifications
Features
  • Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
  • 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
  • Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
  • Edit, store and recall 4 memory presets.
  • Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
  • Built-in guitar tuner
  • Pre-harmony Distortion loop
Shifting Modes Triad Center Shifting Mode

Create musically correct harmonies based around your favorite chordal structure whether soloing a riff in a specific key or using the sidechain input for chord recognition.

Scalic Shifting Mode

Creates musically correct harmonies with various shifting depending on the harmony key.

Fixed (chromatic) Shifting Mode

Applies fixed harmony intervals to all notes with the fixed number of semitones selected.

Detune Shifting Mode

Get a thick overall sound applying a small fixed amount of pitch shifting to the lead guitar voice ranging from 5 cents to 30 cents in both up and down directions simultaneously.

Configuration Electric Guitar With Pre-Harmony Distortion and Stereo Amplifiers Add distortion to your lead and harmonies.

Config 1 The Side-Chain Using Two Guitars with Pre-Harmony Distortion This configuration is used when the 2nd guitar is the source signal.

Config 2 Specifications

Unit Dimensions: 9.75" x 7.9" x 3.4“
Unit Weight: 4 lbs./1.82 kg.
Power Supply: 9VAC 1300mA PS0913B-120 Included
Inputs: 1/4" Unbalanced
Outputs: 1/4" Unbalanced
Sidechain: Ground Lift Switch

The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound. The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away. The main features of the Marshall EH-1 ECHOHEAD include:
  • 6 different, high quality delay effects for you to explore
  • Multi-mode selector switch
  • Delay time control
  • Feedback control
  • Level control
  • Solid metal casing
  • Passive bypass
  • Tap tempo pedal input
  • Power: 9V DC Centre Negative Regulated PSU or PP3 battery
  • Minimum Current Draw: 80mA
  • Switches: On/Off Switch
  • Indicators: On/Off LED
  • Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
  • Input Impedance: 1MOhm
  • Output Load Impedance: less than 1kOhm
  • Dimensions: 120mm x 65mm x 55mm
  • Weight: 510 grammes

Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.

 

 

Input Impedance1 M ohms
Output Impedance1 k ohms
Recommended Load Impedance10 k ohms or greater
Residual Noise Level-93 dBu (IHF-A, Typ.)
ConnectorsINPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V)
Power SupplyDC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw22 mA (DC 9 V)
AccessoriesDry Battery 9 V type (6F22/9 V)
OptionAC Adaptor (PSA-Series)
Size and Weight ( incl. battery )
Width
73 mm2-7/8 inches
Depth
129 mm5-1/8 inches
Height
59 mm2-3/8 inches
Weight
410 g0 lbs. 15 oz.

 

  • Experience true analog delay and vintage slap-back echo that rivals any tape delay
  • This BEHRINGER product has been designed to compete head to head with leading products on the market
  • Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
  • Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
  • Blue status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • First-class electronic On/Off switch for highest signal integrity in bypass mode
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
Analog at its Finest Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command. Easy to Operate The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode.  You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included). Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay...
Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
  • BOSS' best flanging effects in a compact pedal
  • New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
  • Momentary mode turns flanging on instantly
  • Tap tempo adjustable via pedal
  • Independent Guitar and Bass inputs and stereo outputs
  • BOSS 5-year warranty
Weight0.30 kg1.82 kg0.51 kg0.41 kg1.00 kg1.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 1.82 kg
Weight 0.51 kg
Weight 0.41 kg
Weight 1.00 kg
Weight 1.30 kg

Recently Viewed Products