The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. […]
The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5″ case and has a built-in power supply.
Weight
1.51 kg
Reviews
There are no reviews yet.
Be the first to review “PALMER PMBLA Pro PMBLA – Dual Channel Line Merger active” Cancel reply
Output AMP2 is electronically converted with a subsequent transformer stage
Operation with 9V battery recommended
5 years manufacturing guarantee
Adjustable drum stool, diameter 280mm
Content
The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5" case and has a built-in power supply.
Practical, easy to use and stable stand for Eb alto saxophones. Solid square-type aluminum tubes with a large central locking screw, protective rubber bumps where the stand connects with the saxophone body and the bell. Embedded foot end caps. Folds compactly, can be transported in the supplied velour bag in the saxophone bell.
Weight: 0.3 kg
Height: 310 mm
"When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended.
The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.
ZBox Overview
Take back your guitar tone!
Today's guitar amp modeling plug-ins are simply amazing in their ability to faithfully model real guitar amplifiers. From IK Multimedia's Amplitube, to Waves, to Native Instruments, to Line 6, to Digital Performer's included Custom '59, you can plug your guitar directly into your audio interface, dial up a guitar tone in your plug-in software, and play. The sound is simply stunning.
But wait. They're ALL MISSING SOMETHING. In fact, they're missing a crucial element of the signal path that simply cannot be modeled in software: the proper input impedance of a real guitar amplifier. When you plug your guitar into your audio interface, the interface's impedance does not match the typical levels found on a real guitar amplifier.
The result?
No matter how hard you try, you'll never quite be able to replicate the true sound and "feel" of playing into a real guitar amp. The sound will be just a little more thin and unresponsive than the real thing.
The solution? ZBox!
ZBox matches the output impedance (”Z”) of your guitar to the impedance of a non-amp input, such as the mic/instrument preamp inputs on your audio interface. Without proper impedance matching, your guitar wonʼt sound natural or "feel right”.
ZBoxʼs unique advantage? Authentic matching circuits that emulate the two-jack switching network found on many classic amplifiers, complete with analog simulation of the input tube grid. Only ZBox delivers the most authentic amplifier impedance matching available for the absolute truest sound and "feel” from your guitar.
ZBox is the "missing link” for digital guitar processing, providing the hardware-driven input characteristics required to truly emulate a real guitar amp.
If you use Digital Performer's Custom 59 amp model plug-in, or a third-party guitar plug-in product like IK Multimedia Amplitube, Waves GTR, Native Instruments Guitar Rig, or similar guitar modeling software, use ZBox to further enhance the authenticity of the tones you play from these products!
Just plug your guitar into ZBoxʼs Lo-Z or Hi-Z input (whichever sounds better), and plug the ZBox into the guitar input on the destination device (audio interface, wireless box, mixer, recorder, PA, etc.) as shown.
Guitar inputs on audio interfaces, mixers, PAs, wireless transmitters and other similar devices (often labeled "instrument”) usually have impedances that differ significantly from most guitar amps. This mismatch can make your guitar sound too bright, thin and brittle.
ZBox provides the proper input impedance levels to match your guitarʼs output signal. The result? Your guitar sounds like it is connected to a real guitar amp and has a much warmer tone and authentic "response.”
This is especially true when using digitally modeled guitar processing software (plug-ins) on your computer, audio interface, digital mixer, etc.
To support a wide range of guitars, ZBOX provides authentic "Hi-Z” and "Lo-Z” inputs, just like the ones found on many classic guitar amps, complete with analog simulation of the input tube grid.
Adjustable drum stool, diameter 280mm
Drums seat adjustable in height (500mm-630mm), Anatomical round saddle with a diameter of 280mm, Tube diameter: 28.6mm/25mm, Legs double reinforced with anti-slip protectors at the ends.
Also available as 2, 4 and 16 Ohm Versions
Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.
Technical specifications:
Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
Input impedance: 8 ohms, max.
Input load: 120 w RMS
Input level display: 6 LED's
Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.