| Content | Passive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.
- Each channel: Input: female XLR type
- Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type
- Nominal impedance for inputs/outputs: 200
- Max. input level: + 6 dBu
| The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.
The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels. Features: - 1x6 Stereo Distribution Amp with Monitoring.
- 1 set of stereo (2) XLR inputs.
- 6 sets of stereo (2) XLR outputs.
- Input stage has LED level meter.
- Each output channel can be switched to mono.
- Each output channel can be individually monitored.
- Built-in headphone amp.
- Optional transformer balanced outputs.
- Electronically balanced inputs with individual left/right level controls.
- LED metering on input for balancing stereo material or two mono signals.
- Left / Right level controls on each output with a stereo / mono switch.
- Headphone jack to monitor output of selected channel.
- LED metering on output of selected channel.
- Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
- 1 unit rack space.
- Inputs and Outputs are balanced XLRs at +4dBu.
|
- Connect 2 TVs or projectors and switch between 4 connected HDMI devices.
- HDMI matrix switch allows you to watch other HDMI devices on 2 screens independently.
- Use the built-in 1080p downscaler in case 1 or more screens do not support 4K resolution.
- Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.
- Supports Dolby Atmos and DTS:X and all other common audio formats.
- With additional digital audio output to also connect your AV receiver using a single cable.
- Supports Audio Return Channel (ARC) to avoid lip-sync problems.
- Switches automatically and/or with remote control.
Connections
|
|
| AV input |
4 x HDMI |
| AV output |
2 x HDMI |
| Digital audio output |
1x Toslink (optical) |
Video
|
|
| Video resolution |
Max. 4K60 (3840 x 2160@60 Hz) |
| PC resolution |
Max. 2560 x 2048 Hz |
| Video bandwidth |
18 Gbps |
| Clock frequency |
Max. 600 MHz |
| HDMI standard |
HDMI, EDID, DVI, Deep Color 36 bit, x.v. Colour and 3D formats |
| HDCP standard |
HDCP 2.2 |
| Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2 |
| Colour depth |
Max. 36 bit |
Audio
|
|
| HDMI audio |
DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, DTS:X, Dolby Digital/AC3, DTS 5.1 and PCM stereo |
| Optical Audio |
Dolby Digital/AC3, DTS 5.1 and PCM stereo |
General
|
|
| Dimensions (h x w x d) |
18 x 242 x 104 mm |
| Weight |
620grams |
| Power |
100-240 VAC 50/60 Hz, 12 VDC adapter |
| Compressos Expander Gate Kimiter DBX 166XS Stereo
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Specifications
| Input Connectors |
1/4" TRS, female XLR (pin 2 hot) |
| Input Impedance |
>50kΩ balanced, >25kΩ unbalanced |
| Max Input |
>+24dBu, Balanced or Unbalanced |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Sidechain |
1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) |
| Sidechain Impedance |
Tip = >10kΩ (Input), Ring = 2kΩ (Output) |
| Sidechain Max Input Level |
>+20dBu (tip/input); >+20dBu (ring/output) |
| Output Connectors |
1/4" TRS, female XLR (pin 2 hot) |
| Output Impedance |
120Ω balanced, >60Ω unbalanced |
| Max Output |
+21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω) |
| Frequency Response |
20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain |
| Noise |
|
|
iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?
With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.
? Advanced Feedback Suppression (AFS?)
? Type V? Noise Reduction
? PeakStopPlus? Limiting
? 2/3-octave Constant Q frequency bands
? Switchable boost/cut ranges of ±6 or ±15dB
? 18 dB per octave 40Hz low-cut filter
? ±12dB input gain range
? XLR, TRS and Euroblock Inputs and Outputs
? Internal Toroidal Transformer
? Frequency Response of 10Hz to 22kHz
? Dynamic range of greater than 113dB
? User Power Up Features
? Relay Bypass for Power Failure System Protection
| Practical distributor with 1 input and 6 outputs
- Extends every mixer with additional outputs
- 1 stereo XLR input
- 6 stereo zone outputs (XLR)
- Each zone with level control and mono switch
- LED display of signal input and mono/stereo mode
- Rack installation with 1 U
- (19") 48.3 cm rack installation 1 U
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
7 W |
| S/N ratio: |
>69 dB |
| THD: |
<0.2 % at 1 kHz |
| Power connection: |
Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) |
| Impedance: |
Input 45.1 kOhm
Output 125 Ohm |
| Gain: |
15 dB |
| Max. level: |
Output: +22 dB
Input: +9 dBV |
| Color: |
Silver |
| Housing design: |
(19") 48.3 cm rack installation 1 U |
| Dimension: |
Width: 48.3 cm
Depth: 12.6 cm
Height: 4.45 cm |
| Weight: |
2.15 kg |
|
Reviews
There are no reviews yet.