Palmer STUDIMON 5 Powered 5″ Reference Nearfield Studio Monitor
5″ woofer and 0.75″ soft dome tweeter
Bass reflex design
60-W RMS bi-amping power amplifier
70 Hz to 20 kHz frequency response
Balanced XLR and 6.35 mm stereo jack input
Compact design
Elegant and robust housing
Active 5″ nearfield reference-class studio monitor
A basic requirement for any studio is that the mix is accurate and that it’s reproduced with the highest possible dynamics and impulse fidelity. The STUDIMON 5 from Palmer is a reference-class nearfield studio monitor with a bi-amping power amplifier. Drawing on two 30-watt class-AB power amplifiers, the STUDIOMON 5 delivers incredible sound despite its compact design. The studio monitor is fitted with a magnetically shielded 5″ woofer with rubber surround and a 0.75″ tweeter with silk dome, and features a rear reflex aperture for optimal deep bass reproduction. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker’s features. The elegant design of the STUDIOMON 5 seamlessly complements MONICON series products from Palmer.
Product type
Other Studio and Recording Equipment
Type
Studio monitor
Low/mid driver dimensions
5 “
Woofer size
127 mm
Woofer magnet
80 mm Ferrit
Woofer brand
Custom-made
HF driver dimensions
0.75 “
HF Driver Size
19 mm
HF driver magnet
28 mm Neodym
HF driver brand
Custom-made
Power amplifier (Class A)
Class A/B
Dispersion (H x V)
120 ° x 120 °
RMS
2 x 30 W
Frequency response
70 – 20.000 Hz
Crossover frequency
2500 Hz
Max. SPL
110 dBU @ 1 kHz dB
Signal-to-noise ratio
85 dB
Protection circuits
Overtemperature , short circuit
Input impedance
10,000 Ohm(s)
Controls
mains switch (on/off) , volume control
Indicators
orange (LED)
Line input connectors
6.3 mm stereo jack (balanced) , XLR (balanced)
Operating voltage
Switching power supply
Operating voltage
100 V AC – 240 V AC, 50 – 60 Hz
Cabinet material
Birch Plywood , MDF
Housing Wall Strength
15 mm
Cabinet surface
Laminated , stained
Cabinet colour
Black
Cabinet construction
vented
Width
190 mm
Height
268 mm
Depth
215 mm
Weight
3,95 kg
Accessories (included)
Power cord
Weight
4.00 kg
Reviews
There are no reviews yet.
Be the first to review “Palmer STUDIMON 5 Powered 5″ Reference Nearfield Studio Monitor” Cancel reply
Palmer STUDIMON 5
Powered 5" Reference Nearfield Studio Monitor
5" woofer and 0.75" soft dome tweeter
Bass reflex design
60-W RMS bi-amping power amplifier
70 Hz to 20 kHz frequency response
Balanced XLR and 6.35 mm stereo jack input
Compact design
Elegant and robust housing
Active 5" nearfield reference-class studio monitor
A basic requirement for any studio is that the mix is accurate and that it's reproduced with the highest possible dynamics and impulse fidelity. The STUDIMON 5 from Palmer is a reference-class nearfield studio monitor with a bi-amping power amplifier. Drawing on two 30-watt class-AB power amplifiers, the STUDIOMON 5 delivers incredible sound despite its compact design. The studio monitor is fitted with a magnetically shielded 5" woofer with rubber surround and a 0.75" tweeter with silk dome, and features a rear reflex aperture for optimal deep bass reproduction. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker's features. The elegant design of the STUDIOMON 5 seamlessly complements MONICON series products from Palmer.
Product type
Other Studio and Recording Equipment
Type
Studio monitor
Low/mid driver dimensions
5 "
Woofer size
127 mm
Woofer magnet
80 mm Ferrit
Woofer brand
Custom-made
HF driver dimensions
0.75 "
HF Driver Size
19 mm
HF driver magnet
28 mm Neodym
HF driver brand
Custom-made
Power amplifier (Class A)
Class A/B
Dispersion (H x V)
120 ° x 120 °
RMS
2 x 30 W
Frequency response
70 - 20.000 Hz
Crossover frequency
2500 Hz
Max. SPL
110 dBU @ 1 kHz dB
Signal-to-noise ratio
85 dB
Protection circuits
Overtemperature , short circuit
Input impedance
10,000 Ohm(s)
Controls
mains switch (on/off) , volume control
Indicators
orange (LED)
Line input connectors
6.3 mm stereo jack (balanced) , XLR (balanced)
Operating voltage
Switching power supply
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Cabinet material
Birch Plywood , MDF
Housing Wall Strength
15 mm
Cabinet surface
Laminated , stained
Cabinet colour
Black
Cabinet construction
vented
Width
190 mm
Height
268 mm
Depth
215 mm
Weight
3,95 kg
Accessories (included)
Power cord
PRICE PER UNIT
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
The S4X models
The S4X monitors are not just an improved versions of the famous and highly acclaimed S4A but an evolutionary development. Like their predecessors, they have been designed for medium size control rooms. Given their excessive power, the S4X are also capable of working in larger environments. Because both S4X models have identical tweeters and midrange drivers handling frequencies above 350Hz, any combination of either model will integrate perfectly in a 5.1 or 7.1 installation.
X-ART & newly developed broadband amplifier
All models of the SX-Series are equipped with the new X-ART tweeter. The X-ART tweeter has a 4dB higher efficiency, a 3dB higher maximum sound pressure level, and an increase in frequency response up to 50kHz. The newly designed broadband A/B amplifier has been developed by ADAM to perfectly match the needs and capabilities of the X-ART tweeter. The entire range of sound can be heard as never before.
New HexaCone woofers
The new HexaCone woofers are designed with larger and longer voice coils that deliver more linear excursion for higher SPL max. values. A stronger magnetic structure is added as well for an optimum in efficiency and accuracy.
Optional digital input and magnetical shielding
All SX-models (except the S1X) can be optionally retrofitted with a 24 bit/192 kHz D/A Converter featuring an AES/EBU (XLR) and a SPDIF (RCA) inputs as well as a R/L/Mono switch.
All models can optionally be magnetically shielded.
S4X-V
The S4X-V has been designed for vertical installation. This reference monitor features the same X-ART and 6” HexaCone midrange as the S4X-H allowing for almost identical tonal characteristics of both speakers. This allows combinations of the different versions in bigger multi-channel applications without tonal imbalance.
Furthermore, the S4X-V features a newly developed 12” HexaCone woofer. This driver, with electronic correction, has been designed for optimal results in a bass-reflex cabinet. An exceptionally long 3” voice coil coupled with a very strong and highly effective magnet system provides for powerful, yet never overemphasized bass reproduction.
Improperly designed larger monitors are always at risk of compromising the overall sound with bass reproduction that is too intense. As in all ADAM Audio designed speakers, both versions of the S4X have been designed to combine both the power and volume of the bass (28Hz at -3dB point) with the highest possible precision. Combine this with the transparent high and midrange frequencies of the S4X and this will give an engineer a new quality level of control and performance for larger rooms.
The frontpanel
ADAM has developed an innovative front panel with sophisticated controls. These controls allow the user to adapt the speakers to the soundroom with high precision.
Apart from the standby-button, there are two controls for the input sensitivity, two for the bass section and two more for the high frequencies.
Woofer
Number
1
Basket Ø
12" (310 mm)
Voice coil Ø
3" (75 mm)
Cone material
HexaCone
Midrange
Number
1
Type
Cone driver
Basket Ø
6" (156 mm)
Voice coil Ø
1.5" (37 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
500 W / 700 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
28 Hz - 50 kHz
THD > 80 Hz
≤0.6 %
Long term output
≥118 dB
Max. peak
≥128 dB
Crossover frequencies
280 / 2800 Hz
Input impedance
10 KOhm
Weight
78.5 lb (35,6 kg)
Magnetically shielded
Optional
Height x Width x Depth
27" (690 mm) x 14" (360 mm) x 17.5" (445 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Capable of producing peak SPL of over 120 dB per pair, and with a low frequency response extending down to 35 Hz, the 8050B is a powerful wideband bi-amplified monitoring system.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
It is an excellent tool for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses.
The sophisticated low level active crossover has versatile controls for matching the monitor to difficult acoustic environments.
Dedicated very low distortion amplifiers power the drivers, with overload protection for each driver.
The stiff, volume efficient MDETM (Minimum Diffraction EnclosureTM) enclosure and long, curved, flow optimized reflex port combined with low distortion drivers provide solid, clear, low frequencies with a minimum of compression, distortion and port noise artifacts.
The gently curved sided and front MDETM enclosure and advanced Genelec Directivity Control WaveguideTM (DCWTM) provide exceptionally smooth on and off axis frequency responses, precise imaging and optimal directivity across the whole audio spectrum.
Mounting of the 8050B is easy using the included Iso-PodTM(Isolation Positioner/DecouplerTM) which eliminates coloration of the sound by decoupling the monitor from its mounting surface. The monitor can be tilted on the Iso-PodTM to point the acoustic axis directly at the listening position.
Other mounting options are possible using the integrated mounting point on the rear of the enclosure, or the M10 threaded hole on its base.
110 dB
38 Hz - 20 kHz (± 2 dB)
35 Hz - 21 kHz (-3 dB)
1.8 kHz
Bass 8" + Treble 1“
metal dome + DCWTM
Bass 150 W + Treble 120 W
H x W x D 452 x 286 x 278 mm
with Iso-PodTM
12.7 Kg (28 lb)
1 x XLR analog in
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
113dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
Integral through cancellation magnets or by magnet design
Box :
7-1/2" (19mm) MDF panels
Finish :
Dark red natural veneering side panels, black body
Dimensions (HxWxD) :
13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight :
24.2lb (11kg)
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.