POLK AUDIO VS 265 RT High Performance In-Wall Loudspeaker 10-100 W PER CHANNEL -WHITE-

Tweeter 1" silk/polymer x 1
Mid/Woofer 6 ½" composite polymer x 2
Frequency Response 35 Hz - 25 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-200 W/ Channel
Efficiency 91 dB
Dimensions(cm) 53.02 x 22.54 x 9.53

Frequency Response:     52 Hz - 100 kHz
Sensitivity (1W@1M):     90 dB
Nominal Impedance:     4 ohms
Maximum S.P.L (each):     117.8 dBA
Power Handling (RMS):     200 W
Recommended Amplifier Requirements (RMS):     100 - 200 W
Bass Alignment:     Sealed Cabinet
System Design     3-way
Mid / H.F Crossover Frequency:     2400 Hz
Bass Low Pass Crossover Frequency:     380 Hz
Drive Unit Compliment:     2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions - with Grille (H x W x D):     1205 x 330 x 116 mm
(47 7/16 x 13 x 4 9/16 inch)
External Dimensions - excl. Grille (H x W x D):     1205 x 330 x 102 mm
(47 7/16 x 13 x 4 inch)
Cut Out Depth:     97.5mm (3 13/16 inch)
Weight (each) Excluding stands:     25 Kg (55lbs)

Power: 80W RMS / 8 Ohm
SPL: 90dB@Iw/Im - 101dB max
Colour: ΚΑΦΕ / ΧΡΥΣΟ
Dimensions: 40x30x4,5cm
Weight: 1,6kg
 

Length    No
Accessories    REQUIRES the SC-IW Back Box for installation (sold separately)
Amplifier    N/A
Auto On/Off    No
Cabinet Design    Sealed enclosure
Color    Black
Dimensions: (H/W/D)    28.4" x 14" x 3.4" (71.6 x 35.6 x 8.6 cm) *Not installed; excludes grilles, mounting brackets, etc. Enclosure (only): 19" x 14" x 3.375" (48 x 36 x 9.5 cm). Driver (only): 10.5" x 14" x 3.75" (27 x 36 x 9.5 cm)
HiPass Crossover    N/A
LoPass Crossover    N/A
Phase Control    No
Removable Grille    No
Shipping Weight    2 Cartons = Carton 1: 16 lbs. (7.25 Kg), Carton 2: 27 lbs. (12.25 Kg), Total: 43 lbs (19.5 Kg)
Size    Large
Voice Coil    3" Dual Layer inner/outer wind
Warranty (N. Am.)    Two years (drivers - parts & labor)

The IC 610 is the smaller of two strong-sounding built-in loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.

A 25 mm fabric dome tweeter – which may be adjusted horizontally and vertically – has been fitted into the front. Which means that the emitted sound may be perfected to suit even very different room conditions. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.

 
Description
Value
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
75 / 140 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
35 – 32000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
30 - 140 watts
Mounting depth
85 mm
Outer Dimensions (WxH)
220 x 306 mm
Cutting Out (WxH)
188 x 275 mm

Tweeter ¾" ring radiator x 2
Mid/Woofer 8" aerated polypropylene x 1
Frequency Response 30 Hz - 27 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-150 W/ Channel
Efficiency 88 dB
Dimensions(cm) 28.26 x 13.02