POLK AUDIO VS700 LS High Performance In-Ceiling Speaker 10-150W -WHITE-

Audiophile Performance, Cutting-Edge Stealth Design

Stacking the woofer behind the driver unit is an innovation so extreme you wonʼt believe the performance that results! Full-size speaker dynamics and a small-diameter cut-out built-in that virtually disappears into your decor. The Vanishing Series puts high performance stealth audio at your fingertips.

Vanishing 700-LS Features:

Extra deep well design with a Cassini oval woofer mounted above and behind the main driver & tweeter array, for broad coverage and dynamic full-range audio performance in a built-in.

Vanishing® Series built-in speakers feature our exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings. Sheer-Grilles have nearly transparent, ultra-small perfs, and are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms.

Painted to match your décor, Vanishing Series built-in speakers are virtually indistinguishable from their surroundings.

Enhanced, reengineered ring radiator tweeters extend top-end response for incredible details and realistic imaging.

Reflective surfaces in rooms can make sound brighter and cause image distortion. Engaging the Vanishing reflective room compensation feature (by selecting the low setting) lowers the tweeter level to compensate for reflective surfaces. Vanishing reflective room compensation is a custom audio control that cuts the level only in the 4-5kHz range, exactly where reflectivity destroys sound quality. Outside this narrow 1kHz band, the tweeter retains its detailed and accurate high frequency response, for no loss of realistic musical details.

Vanishing Series LS speakers are timbre-matched to Polk LSi speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.

If positioning limitations demand that your loudspeakers be installed closer than 2 feet from side walls, the proximity of the surface can result in a response bump between 50 and 200Hz. This can create boomy sound. The Vanishing wall distance toggle switch is a custom audio control that adjusts the crossover to flatten response and tune out boominess, without sacrificing deep bass response, for more lifelike sound and more flexible placement.

Dual bandpass bass ports are highly efficient in small enclosures, and smoothly funnels the angled wooferʼs low frequencies down around the driver array, eliminating "chuffing,” so your small, practically invisible in-ceiling speakers achieve superior full-range blending and broad coverage with surprisingly deep bass.

Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industryʼs most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. 

Tweeter ¾" ring radiator x 1
Midrange ½" APP driver x 2
Mid/Woofer 5“x7" mineral filled polypro. x 1
Frequency Response 32 Hz - 27 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-150 W/ Channel
Efficiency 90 dB
Dimensions(cm) 20.64 x 21.59

Driver Complement

Tweeter
Quantity 1
Diameter 3/4" (1.91cm)
Type Ring radiator

Midrange

Quantity 1
Diameter 2 1/2" (6.35cm)
Type Dynamic Balance driver with aerated polypropylene cone

Subwoofer

Quantity 1
Diameter 7" (17.78cm)
Type Dynamic Balance woofer with mineral-filled polypropylene cone
Electrical

Total Frequency Response 32Hz-33kHz
Upper -3dB Limit 29 kHz
Lower -3dB Limit 45 Hz
Nominal Impedance 8 ohms
Efficiency 90 dB
Recommended Amplifier Power 10-150 watts per channel
Inputs Gold-plated spring-loaded posts
Dimensions

Cut-Out Diameter 6 1/2" (16.51cm)
Overall Diameter 8 1/8" (20.64cm)
Mounting Depth (includes 1/2" drywall) 8" (20.32cm)
Pre-Construction Bracket PB SC50
Overall Depth 8 1/2" (21.59cm)
Shipping

Unit of Measure each
Total Shipping Weight 8 pounds
Warranty

Speaker Warranty Lifetime 

Outer Flange Dimensions | Metric :11” x 12-3/4” | 27.9 x 32.4cm
Cut Out Dimensions | Metric :9-7/8” x 11-5/8” | 25.1 x 29.5 cm
Depth from Flange | Metric :3-7/8” | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 4-1/2” bass radiators
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :13 lbs | 5.9 kg

The JBL Professional Control 227C is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227C incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 227C features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. An 8 ohm driver is utilized on the Control 227C and offers 150 Watts of continuous power handling capability.

The Control 227C is easy to install and features a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.

The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

To ensure long life and reliability, Control 227C passes JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.

Features

• Consistent 120° broadband pattern control forexceptional coverage
• Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
• Extraordinary clarity for speech and vocals withextended frequency response for music
• 150 Watts Power Handling
• Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
• Integrated back can with clean, contemporary grille (sold separately)

Specifications

• Frequency Range (-10dB): 43Hz - 19kHz
• Frequency Response (-3dB): 75Hz - 17kHz
• Nominal Sensitivity: 90dB measured half-space; 95dBcomputed for competitive comparison
• Nominal Coverage Angle: 120 degrees conical,broadband
• Nominal Impedance: 8 ohms
• Low Frequency: 6.5" Kevlar reinforced cone
• High Frequency: 1" exit compression driver
• Dimensions (H x Dia.): 12" round baffle x depth fromback of baffle of 5.8“

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

• Bipolar arrays evenly disperse sound effects over a broad area
• Dual 1" pure aluminum dome tweeters produce pristine highs
• High dynamic impact with a pair of 3.5" cast basket drivers and two 3.5" pressure-coupled Low Bass radiators
• Integrated dense wood enclosures provide easy installation and consistent high performance

In-Ceiling Or In-Wall, They’re Incredible

The Definitive Technology Architectural Speaker line delivers high performance sound while remaining practically invisible. Intended for use in custom home theaters of the highest quality, UIW RSS III speakers feature non-resonant medite cabinets, producing the tightest bass, clearest midrange and an ideal combination of direct and ambient sound. The result is uniquely immersive surround performance that completely envelops listeners in an expansive, 360-degree sound stage.

• Total Pieces1

• Included Accessories
  • (1) Wall Mounting Template
  • (1) Paint Mask
  • (1) Paintable Grille
  • (1) Self Adhering Foam Gasket

• Cabinet Warranty5 years
• Drivers Warranty5 years

• Carton 113.5" (34.29 cm) h x 13.5" (34.29 cm) w x 7.25" (18.42 cm) d - 9 lbs (4.08 kg)

• Qty Included1
• Availability US
• Driver Complement
  • (2)  1" (2.54 cm) d (Round) - Tweeter
  • (2)  3.5" (8.89 cm) d (Round) - Mid/Woofer
  • (2)  3.5" (8.89 cm) d (Round) - Bass Radiator
• Grille Dimensions11" (27.94 cm) h x 9.44" (23.98 cm) w

• ShapeRectangle
• Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w

• ShapeRectangle
• Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w

• Audio Inputs
• Speaker Inputs(1) Pair of Heavy Duty, Spring Loaded

• Total Frequency Response40 Hz → 30,000 Hz
• Nominal Impedance Range8 ohms → 4 ohms
• Max Sensitivity (1 watt @ 1 meter)92 dB

• A/V Receiver Crossover SettingsSmall (120 Hz)

• Recommended Amplifier Power Per Channel10 watts → 300 watts