Presonus Eris 3.5 2nd Gen Active Studio Monitor (Pair)

105.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Specifications Powered: Yes Power Configuration: Single Amp Quantity: Pair LF Driver Size: 3.5″ Woofer LF Driver Type: Woven Composite HF Driver Size: 1″ Tweeter HF Driver Type: Ultra-low Mass Silk Dome Total Power: 50W Class AB (25W per speaker) Frequency Response: 80Hz-20kHz Crossover Frequency: 2.8kHz Maximum Peak SPL: 98dB SPL @ 1m Input Types: 1 […]

 

Read more

Specifications

  • Powered: Yes
  • Power Configuration: Single Amp
  • Quantity: Pair
  • LF Driver Size: 3.5″ Woofer
  • LF Driver Type: Woven Composite
  • HF Driver Size: 1″ Tweeter
  • HF Driver Type: Ultra-low Mass Silk Dome
  • Total Power: 50W Class AB (25W per speaker)
  • Frequency Response: 80Hz-20kHz
  • Crossover Frequency: 2.8kHz
  • Maximum Peak SPL: 98dB SPL @ 1m
  • Input Types: 1 x Dual RCA Stereo, 2 x 1/4″, 1 x 1/8″ (aux)
  • Output Types: 1 x 1/8″ (headphones), 1 x Bare Wire Strip (to right speaker)
  • Features: RF interference protection, High/Low frequency boost/cut
  • Enclosure Type: Rear Ported
  • Enclosure Material: Vinyl-laminated MDF
  • Height: 8.3″ (210mm)
  • Width: 5.6″ (141mm)
  • Depth: 6.4″ (162mm)
  • Weight: 6.4 lbs (2.9kg)

New Eris 3.5 are a prime option for producers, gamers, and audiophiles working in condensed spaces

At 50 watts, PreSonus’ Eris 3.5 studio monitors are a prime option for producers, gamers, and audiophiles working in condensed spaces. Each speaker is fit with a 3.5-inch transducer and 1-inch silk-dome tweeter, generating crystal-clear, adjustable playback on all ends. Additionally, versatile connectivity options and an ergonomic form factor allow Eris 3.5 studio monitors to fit into nearly any pre-existing setup with little to no intrusion. Topped off with a vinyl-laminated, medium-density fiberboard construction, Eris 3.5 studio monitors are equipped to outfit your studio space with years of unparalleled audio performance.

Rig-ready studio connectivity

The Eris 3.5 eludes this quandary: its rear panel features a pair of 1/4-inch balanced TRS outputs and standard L/R RCA jacks, granting multiple connectivity options to accommodate setups at any level. There’s no need to worry about power, either — a 50W output guarantees immersive audio in any small-scale studio setting.

Tune into the perfect output

Keeping a balanced audio output is crucial when perfecting your mix. Courtesy of the Eris 3.5’s rear-panel tuning knobs, you’ll have ample control over the output of your higher and lower frequencies, allowing you to hone in on an output best suited to your environment.

 

Weight 3 kg

Reviews

There are no reviews yet.

Be the first to review “Presonus Eris 3.5 2nd Gen Active Studio Monitor (Pair)”

Your email address will not be published. Required fields are marked *

Quick Comparison

Presonus Eris 3.5 2nd Gen Active Studio Monitor (Pair) removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeADAM A3X Active Studio Monitor 25W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W remove
NamePresonus Eris 3.5 2nd Gen Active Studio Monitor (Pair) removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeADAM A3X Active Studio Monitor 25W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W remove
ImagePresonus Eris 3.5 2nd Gen (Pair)
SKUERIS2NDGENLSR 6325PSolo6 BeA3X040050DM-2100
Rating
Price105.00 incl. GR VAT 590.00 incl. GR VAT 995.00 incl. GR VAT 365.00 incl. GR VAT 155.00 incl. GR VAT 378.80 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Specifications

  • Powered: Yes
  • Power Configuration: Single Amp
  • Quantity: Pair
  • LF Driver Size: 3.5" Woofer
  • LF Driver Type: Woven Composite
  • HF Driver Size: 1" Tweeter
  • HF Driver Type: Ultra-low Mass Silk Dome
  • Total Power: 50W Class AB (25W per speaker)
  • Frequency Response: 80Hz-20kHz
  • Crossover Frequency: 2.8kHz
  • Maximum Peak SPL: 98dB SPL @ 1m
  • Input Types: 1 x Dual RCA Stereo, 2 x 1/4", 1 x 1/8" (aux)
  • Output Types: 1 x 1/8" (headphones), 1 x Bare Wire Strip (to right speaker)
  • Features: RF interference protection, High/Low frequency boost/cut
  • Enclosure Type: Rear Ported
  • Enclosure Material: Vinyl-laminated MDF
  • Height: 8.3" (210mm)
  • Width: 5.6" (141mm)
  • Depth: 6.4" (162mm)
  • Weight: 6.4 lbs (2.9kg)

New Eris 3.5 are a prime option for producers, gamers, and audiophiles working in condensed spaces

At 50 watts, PreSonus' Eris 3.5 studio monitors are a prime option for producers, gamers, and audiophiles working in condensed spaces. Each speaker is fit with a 3.5-inch transducer and 1-inch silk-dome tweeter, generating crystal-clear, adjustable playback on all ends. Additionally, versatile connectivity options and an ergonomic form factor allow Eris 3.5 studio monitors to fit into nearly any pre-existing setup with little to no intrusion. Topped off with a vinyl-laminated, medium-density fiberboard construction, Eris 3.5 studio monitors are equipped to outfit your studio space with years of unparalleled audio performance.

Rig-ready studio connectivity

The Eris 3.5 eludes this quandary: its rear panel features a pair of 1/4-inch balanced TRS outputs and standard L/R RCA jacks, granting multiple connectivity options to accommodate setups at any level. There's no need to worry about power, either — a 50W output guarantees immersive audio in any small-scale studio setting.

Tune into the perfect output

Keeping a balanced audio output is crucial when perfecting your mix. Courtesy of the Eris 3.5's rear-panel tuning knobs, you'll have ample control over the output of your higher and lower frequencies, allowing you to hone in on an output best suited to your environment.
 

The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.

Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
 

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

Mid-Woofer
Number1
Basket Ø4.5" (120 mm)
Voice coil Ø1" (25 mm)
Cone materialCarbon Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypeA/B
Amp. power RMS / music25 W / 40 W
Tweeter1
TypeA/B
Amp. power RMS / music25 W / 40 W
Control panel
Input Sensitivity-∞ to +14 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response60 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.8 %
Long term output≥98 dB
Max. peak≥106 dB
Crossover frequencies2800 Hz
Input impedance10 KOhm
Weight10.1 lb (4,6 kg)
Magnetically shieldedNo
Height x Width x Depth10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual


Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

  • Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
  • Powered bass reflex speakers with 15 watts per side and flat frequency response
  • Active subwoofer with 50-watt amplifier for increased low end
  • Front-mounted controls convenient located on right speaker
  • Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
  • Sleek black wooden cabinets with magnetic shielding

Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight

Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
Weight3 kg8.00 kg11.00 kg5.00 kg3.50 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3 kg
Weight 8.00 kg
Weight 11.00 kg
Weight 5.00 kg
Weight 3.50 kg
Weight 15.00 kg