PRESONUS TEMBLOR T-8 Active subwoofer 100W

331.07 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4″ TRS and RCA main inputs, and 1/4″ TRS and RCA pass-through outputs to connect your top speakers. The speaker also includes a continuously variable […]

 

Read more

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4″ TRS and RCA main inputs, and 1/4″ TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications

Inputs 2x Balanced 1/4″ TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼” TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz – 200 Hz
Low Pass Filter 50 – 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8″ glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0″ (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     

Weight 19.00 kg

Reviews

There are no reviews yet.

Be the first to review “PRESONUS TEMBLOR T-8 Active subwoofer 100W”

Your email address will not be published. Required fields are marked *

Quick Comparison

PRESONUS TEMBLOR T-8 Active subwoofer 100W removeEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removePRESONUS TEMBLOR T-10 Active subwoofer 250W removeGENELEC 7073A ACTIVE SUBWOOFER removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (RED) remove
NamePRESONUS TEMBLOR T-8 Active subwoofer 100W removeEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removePRESONUS TEMBLOR T-10 Active subwoofer 250W removeGENELEC 7073A ACTIVE SUBWOOFER removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (RED) remove
Image
SKUTemblor T-8TS110EV/EM/000010Temblor T-107073AGibbon 10R
Rating
Price 331.07 incl. GR VAT 895.00 incl. GR VAT 1,205.00 incl. GR VAT 388.99 incl. GR VAT 6,235.28 incl. GR VAT465.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications
Inputs 2x Balanced 1/4" TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz - 200 Hz
Low Pass Filter 50 - 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8" glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0" (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     

10" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS110
Description Subwoofer
Dimensions (WxHxD) [mm] 330 x 485 x 430
Dimensions (WxHxD) [“] 12.99 x 19.09 x 16.93
Free-field frequency range (-3dB) 28Hz - 300Hz
Woofer 250mm/10“
Maximum SPL @ 1m 108dB
Number of amplifiers 1
Total short-term output power 250W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 250VA
Misc.
Weight kg/lb. 19.6 / 43.2

12" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Frequency response curve

Product TS112
Description Subwoofer
Dimensions (WxHxD) [mm] 390 x 560 x 508
Dimensions (WxHxD) [“] 15.35 x 22.05 x 20
Free-field frequency range (-3dB) 24Hz - 300Hz
Woofer 300mm/12“
Maximum SPL @ 1m 112dB
Number of amplifiers 1
Total short-term output power 400W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 410VA
Misc.
Weight kg/lb. 25.5 / 56.2

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

  • 10-inch glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

​Controls and filters
  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert and ground-lift switch

Power and safety
  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated, gravity-calibrated rubber feet for stable placement

Inputs and outputs
  • Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼" TRS outputs 
  • XLR subwoofer output for connecting a second T10
Inputs

2- Balanced XLR

2- Balanced ¼" TRS

2- Unbalanced RCA
   
Outputs

2- Balanced XLR (full range with 80 Hz HPF option)

2- Balanced ¼" TRS (full range with 80 Hz HPF option)

1- Balanced XLR (Sub Out)
Performance
Frequency Response 20 Hz - 200 Hz 
Low Pass Filter Frequency 50 - 130 Hz (variable)
Signal-to-Noise Ratio >98 dB
THD 0.019% @ power

The Genelec 7073A active subwoofer is a powerful and precise bass reproduction tool for large Surround Sound or Stereo installations. Its 19 Hz lower cut-off frequency and 124 dB sound pressure output capability are sufficient to handle the most demanding high SPL applications.

All electronics are integrated into the subwoofer cabinet: active crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management unit has six signal input and output channels (L/C/R Front and L/C/R Rear), LFE input and summed signal output connectors, providing great flexibility and easy connection.

124 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
4 x 12“
1000 W
H x W x D  524 x 1440 x 558 mm
120 Kg (265 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

Product details

Woofer:10-inch black Glass-Composite Cone
Frequency response:20Hz - 200Hz
Crossover frequency:50Hz - 130Hz adjustable
Amplifier Power:300W
S/N Ratio (A weighted):>95dB
THD + N @ Rated Power:  0.08%
Inputs:2x XLR, 2x TRS, 2x RCA Connectors
Outputs:2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors
Input Impedance:20 kOhm balanced, 10 kOhm unbalanced
Phase reverse:0 / 180° switch
Ground Lift switch:On / Off
Bypass Footswitch:On / Off
Available colors:Red, Black
Net weight:17.6kg / 38.7lb
Net Dimensions: L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in
Weight19.00 kg19.60 kg25.50 kg17.90 kg120.00 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.00 kg
Weight 19.60 kg
Weight 25.50 kg
Weight 17.90 kg
Weight 120.00 kg
Weight 8.00 kg