Content |
PROEL introduces in the STAGE GEAR family a Series of 8 new exciting models. The 100 Series includes a range of accessories and useful tools, ranging from D.I. Boxes and Headphone Amps to Signal Splitters, Tube Preamps and Power Supply Units, designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shells or in sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. |
The AKG MPA V L Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. This product replaces the AKG MPA III L Phantom Power Adapter, which did not have a bass roll-off switch. |
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
|
The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have unbalanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard
|
- No software installation required, making it quick and easy to use.
- Energy efficient and no external power adapter required.
- Connect an HD source (Apple TV, game console, digital TV box, Blu-ray player, etc.) with an HDMI output to a projector or TV via the SCART or RCA input.
- Convert an HDMI signal (720p/1080p) to an analogue composite signal with stereo audio.
- With built-in NTSC/PAL selector switch.
The Connect HA13 converts an HDMI signal to an RCA/SCART signal. This enables you to still connect devices that do not have the same connections. This HDMI converter can be used to connect, for example, your decoder (with an HDMI connection) to your TV (which only has an RCA/SCART socket).
Connections
|
|
AV input |
1 x HDMI |
AV output |
3 x RC (video, L/R audio) |
Video
|
|
HDMI input resolution |
480i@60 Hz, 480p@60 Hz, 576i@60 Hz, 576p@60 Hz, 720p@60 Hz, 1080i@60 Hz, 1080p@60 Hz |
RCA output resolution |
480i and 576i |
Video systems |
PAL and NTSC |
Audio
|
|
Audio input |
Stereo |
General
|
|
Dimensions (h x w x d) |
20 x 55 x 66 mm |
Weight |
40 grams |
Ambient temperature |
+0 to +70°C |
Humidity |
10% to 85% |
|
The S-phantom gives you an in the field, on location solution for powering
your condenser microphones that need 48 volt power
FEATURES:
2 Channel 48 Volt phantom power supply
2 Balanced XLR mic inputs
2 Balanced XLR and 1/4? mic outputs
AC adapter included
|
Reviews
There are no reviews yet.