| Content |
The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have unbalanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard
|
The APT20 is a phantom power supply unit for use with two condenser microphones. It supplies 48 V DC to the microphones and routes the signal to a mixer or microphone amplifier. It features XLR connections for in- and output, and at the back is an euro power connection with power switch provided. ![]()
| Alctron PS200 Portable 48V Phantom Power Supply for Condenser Microphone Live Broadcast Mic Power Supply
The PS200 is portable, battery-operated, and designed to provide 48V phantom power to any condenser microphone in remote locations
It also features a DC power loop enabling multiple unit operations
Power condenser microphones requiring phantom power
Operates on two 9 Volt alkaline batteries, or the included 9V DC adapter
High-frequency switching power supply to eliminate noise
Utilizes a switching regulator for stable voltage performance
Battery life approx. 10 hours, using one 9V alkaline battery
Package Included:
1 x Power Supply(microphone and battery are not included) |
- No software installation required, making it quick and easy to use.
- With built-in 720p/1080p selector switch.
- Connect a video source (DVD player, video recorder, security camera, etc.) with a SCART or RCA output to an TV or projector with an HDMI input.
- Convert an AV signal (composite and stereo audio) to an HDMI signal (720p/1080p).
The Connect AH31 converts an RCA/SCART signal to an HDMI signal. This enables you to still connect devices that do not have the same connections. You can use this HDMI converter, for example, to use your old video player to play videos on your TV with an HDMI connection. Or you can bring out your old gaming console to play the games of your childhood on your new TV.
Connections
|
|
| AV input |
3 x RCA (video, L/R audio) |
| AV output |
1 x HDMI |
Video
|
|
| HDMI output resolution |
720p@60 Hz and 1080p@60 Hz |
| RCA input resolution |
480i and 576i |
| Video systems |
PAL and NTSC |
Audio
|
|
| Audio input |
Stereo |
General
|
|
| Dimensions (h x w x d) |
20 x 55 x 66 mm |
| Weight |
40 grams |
| Ambient temperature |
+0 to +70°C |
| Humidity |
10% to 85% |
| Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
| Phantom Power Adapter 48V
Mini XLR Male 3 pins > XLR male
Type
Phantom power adapter
Input connector
Mini-XLR (3-pin)
Gender of input connector
male
Output connector
XLR (3-pin)
Gender of output connector
male
|
Reviews
There are no reviews yet.